Abstract:This paper focuses on the introduction of sugarcane bagasse, an agricultural byproduct, as a renewable carbon-based additive to metallurgical coal to produce biocoke for the steel industry. Through subjecting pelletized sugarcane bagasse samples to various pyrolysis conditions, chars with varying properties were generated. With increasing final pyrolysis temperature (200, 400, 600, and 800 °C), a rise in carbon content and decline in oxygen, nitrogen and hydrogen levels in the chars were observed. The presence of an inert purge gas during pyrolysis prompted abundant micropore formation between 400 and 600 °C, yielding high specific surface area (SSA > 300 m 2 /g) chars at 600 °C and 800 °C. Conversely, chars produced in a fixed (unpurged) nitrogen environment exhibited minimal porosity and consequently low SSAs (<5m 2 /g). These various chars were then blended (at 10 % addition) with a medium-volatile bituminous coal to evaluate their impact on the viscoelastic properties of the coal. Chars pyrolyzed to lower final temperatures had the greatest detrimental effect on blend fluidity due to (1) their continued devolatilization which introduced void spaces in the blend creating pathways for the exhaust of coal volatiles, and (2) their elevated oxygen content, which scavenged essential mobile hydrogen needed to facilitate viscoelastic behaviour. Furthermore, chars with similar oxygen content but substantially different (by over two orders of magnitude) SSAs generated comparable coal-char blend viscosity profiles, indicating that the presence or absence of micropores in an additive does not significantly influence the viscoelastic behaviour of the coal. The reduction in blend fluidity for the addition of chars pyrolyzed to 800 °C was comparable to the modelled addition of inertinite macerals, implying that these high-temperature chars predominantly serve as inert solid additives. Comparison to a blend with 10 % mesoporous activated charcoal as the additive confirmed that it is mesopores that destroy fluidity, while micropores do not play a significant role. Mesopores were identified to adsorb/trap the relatively large tar-like compounds that are responsible for coal plasticity. Collectively, this research identifies three key factors contributing to fluidity reduction in coal-additive blends: void creation, oxygen content, and mesoporosity. These findings offer insights into optimizing biocoke production processes.

Novel additives obtained from low grade biomasses for coke-making

Novel Carbon-Rich Additives Preparation by Degradative Solvent Extraction of Biomass Wastes for Coke-Making.

Performance and Reaction Mechanism of a Novel Coking Binder Obtained from Low-Grade Coal

Synthesis of an industrial by-product-based polymeric additive for use with non-coking coal in metallurgical coke making and a combined density functional theory assessment of its molecular mechanism in fluidity development

Direct Modification of Solid Residues During Co-Firing of Coal Sludge and Coal☆

Effects of Chemicals and Blending Petroleum Coke on the Properties of Low-Rank Indonesian Coal Water Mixtures

Effects of Fe2O3 addition on the thermoplasticity and structure of coking coal matrix during thermoplastic stage of pyrolysis

Understanding the Effect of Different Biomass Ash Additions on Pyrolysis Product Distribution, Char Physicochemical Characteristics, and Char Gasification Reactivity of Bituminous Coal

Synergistic Effect for Co-Coking of Sawdust and Coal Blending Based on the Chemical Structure Transformation

Investigation on Synergistic Effects and Char Morphology During Co-pyrolysis of Poly(vinyl Chloride) Blended with Different Rank Coals from Northern China

Study on the interaction and coking characteristics of low-sulfur meager coal and medium-high sulfur fat coal during co-carbonization process

Interaction between dispersant and coal slime added in semi-coke water slurry: An experimental and DFT study

The effects of additives on deposit formation during co-firing of high-sodium coal with high-potassium and -chlorine biomass

Development of a Novel Mild Depolymerization Method of Coal by Combining Oxygen Oxidation and Formic Acid Reduction Reactions

High temperature viscoelastic behaviour of sugarcane bagasse char and coal blends: Role of oxygen and porosity of char on fluidity reduction

Co-pelletization of Sewage Sludge and Biomass: Thermogravimetric Analysis and Ash Deposits

Interaction Between Low-Rank Coal and Biomass During Degradative Solvent Extraction

Evaluation of Coal Extraction with Supercritical Carbon Dioxide/1-Methyl-2-pyrrolidone Mixed Solvent

Co-pyrolysis of low-rank coal and rice stalk: A comprehensive study on product distributions, product properties, and synergistic effects

Degradative Solvent Extraction of Low-Rank Coals by the Mixture of Low Molecular Weight Extract and Solvent As Recycled Solvent

Effect of Binder Addition on Combustion Characteristics of Cotton Straw Pellets and Kinetic Analysis