Abstract:In the telescope observation, the position of fiber will highly influence the spectra efficient input in the fiber to the spectrograph. When the fibers were back illuminated on the spectra end, they would export light on the positioner end, so the CCD cameras could capture the photo of fiber tip position covered the focal plane, calculates the precise position information by light centroid method and feeds back to control system. A set of fiber back illuminated system was developed which combined to the low revolution spectro instruments in LAMOST. It could provide uniform light output to the fibers, meet the requirements for the CCD camera measurement. The paper was introduced the back illuminated system design and different test for the light resource. After optimization, the effect illuminated system could compare with the integrating sphere, meet the conditions of fiber position measurement.Using parallel controlled fiber positioner as the spectroscopic receiver is an efficiency observation system for spectra survey, has been used in LAMOST recently, and will be proposed in CFHT and rebuilt telescope Mayall. In the telescope observation, the position of fiber will highly influence the spectra efficient input in the fiber to the spectrograph. When the fibers were back illuminated on the spectra end, they would export light on the positioner end, so the CCD cameras could capture the photo of fiber tip position covered the focal plane, calculates the precise position information by light centroid method and feeds back to control system. After many years on these research, the back illuminated fiber measurement was the best method to acquire the precision position of fibers. In LAMOST, a set of fiber back illuminated system was developed which combined to the low revolution spectro instruments in LAMOST. It could provide uniform light output to the fibers, meet the requirements for the CCD camera measurement and was controlled by high-level observation system which could shut down during the telescope observation. The paper was introduced the back illuminated system design and different test for the light resource. After optimization, the effect illuminated system could compare the integrating sphere, meet the conditions of fiber position measurement.

Fiber Assignment for Multi-Object Fiber-Fed Spectrographs

Fiber Assignment in Wide-Field Multiobject Fiber-Fed Spectrographs

Fiber Assignment in Next-generation Wide-field Spectrographs

An Observation Planning Algorithm Applied To Multi-Objective Astronomical Observations And Its Simulation In Cosmos Field

Number and Distribution of Fiducial Fibers in a Spectroscopic Survey Telescope

Back-illuminate Fiber System Research for Multi-Object Fiber Spectroscopic Telescope

Accuracy Research for Survey Telescope Fiber Position Measurement

Fiber Position Measurement Method in LAMOST Based on External Planar Target

Precise measurement of fibers position using bundle adjustment algorithm

Research of Fiber Position Measurement by Multi Ccd Cameras

The Large Sky Area Multi-Object Fibre Spectroscopy Telescope (Lamost) Project

A multi-functional fiber positioning system for Extremely Large Telescopes

Photogrammetry-based Metrology of Fiber Positioner in LAMOST

Design and study of visual fast detecting instrument for fiber positioners

Light Spot Mapping Algorithm for Optical Fiber Based on Siamese Network

Collision-free Motion Planning Approach for Multi-Object Spectrographs with Equal-Arm Fiber Positioners

Collision Possibility Analysis and Collision Avoidance for Multi-Object Fibre-Fed Spectrographs with Theta–phi Positioners

The Fiber View Metrology System Design for Spectral Survey Telescope

Novel Fiducial Fiber Scanning Measurement Method Based on a Polar Coordinate System for LAMOST

Research on Reference Fiber for Closed-Loop Measurement of Spectral Survey Telescope

Data Processing of the Multi-Object Fiber Spectra