Abstract:Spinel LiMgxMn2-xO4 cathode materials were synthesised using a hydrothermal method, with the effects of doping Mg on the structure and electrochemical performance of LiMn2O4 subsequently investigated. It was found that no other hybrid phases existed in the LiMgxMn2-xO4 and that doped Mg cannot change the spinel lattice type of LiMn2O4. An appropriate Mg content was beneficial for improving the crystallinity and particle uniformity of the samples. The electrochemical performance of the LiMgxMn2−xO4 was assessed in the 2.9~4.3 V range, with the specific discharge capacity of the LiMn2O4 potentially reaching 139.9 mAh g−1 at 0.2 C, with a capacity retention rate of 63.76% after 100 cycles. Furthermore, the LiMn1.97Mg0.03O4 demonstrated an excellent cycling performance at both room temperature (25°C) and at a high temperature (55°C). At 25°C, the first specific discharge capacity was 124.3 mAh g−1 at 0.2 C, with a capacity retention rate of 94.29% after 100 cycles, while the specific discharge capacity can reach 94.8 mAh g−1 at 5 C and 74.0 mAh g−1 at 10 C. At 55°C, the initial specific discharge capacity was 125.6 mAh g−1 at 0.2 C, with a capacity retention rate of 85.43% after 100 cycles. The cyclic voltammogram curves and electrochemical impedance spectroscopy results indicated that, compared with the pristine LiMn2O4, the LiMn1.97Mg0.03O4 had a larger Li+-ion diffusion coefficient and smaller resistance during the charge–discharge process. Overall, the results indicated that Mg doping is beneficial in improving the electrochemical performance of spinel LiMn2O4.

Synthesis and Electrochemical Characterization of Ge<sup>4+</sup>, Sn<sup>4+</sup> Doped Spinel LiMn<sub>2</sub>O<sub>4</sub>

Spinel LiMn2O4 integrated with coating and doping by Sn self-segregation

Synthesis and Electrochemical Properties of Sc-Doped Li1.05scxmn2-Xo4 Spinel As Cathodic Material for Rechargeable Li-Battery

Preparation and Characterization of Ge4+-doping Li4Ti5O12 Anode Material for Li-ion Battery and Its Electrochemical Properties

Preparation of Submicrocrystal LiMn2O4 Used Mn3O4 As Precursor and Its Electrochemical Performance for Lithium Ion Battery

Synthesis and characterization of Li1.05Co0.3Ni0.35Mn0.3M0.05O2 (M=Ge,Sn)cathode materials for lithium ion battery

Synthesis and Characterization of Sn-Doped Limn2o4 Cathode Materials for Rechargeable Li-Ion Batteries

Doping Mg2+ to Improve the Li+ Diffusion Rate and Electrochemical Performance of Spinel LiMn2O4

Changes in Mn3+/Mn4+ Ratio, Resistance Values in Electrochemical Impedance Spectra, and Rate Capability with Increased Lithium Content in Spinel LixMn2O4

Doping Effect of Cobalt,cerium and Magnesium to Spinel LiMn2O4 on Their Structures Character and Properties

Preparation and performance of Mg-doped spinel-structured LiMn2O4 cathode materials

Hydrothermal synthesis of Mg-doped LiMn2O4 spinel cathode materials with high cycling performance for lithium-ion batteries

Optimization Of Spinel Li1+Xmn2-Yo4 As A 4 V Li-Cell Cathode In Terms Of A Li-Mn-O Phase Diagram

Preparation of Li1+Y-Xznxmn2-Yo4 Spinel As A Cathode Material for Li+-Batteries

Preparation and Electrochemical Properties of X Li2MnO3·(1-x)LiMn2O4 Composites

Surface Modification Mechanism of Spinel Structure LiM_xMn_(2-x)O_4 As Cathode Materials for Lithium Ion Batteries

Optimization of Spinel Li[sub 1+x]Mn[sub 2−y]O[sub 4] as a 4 V Li-Cell Cathode in Terms of a Li-Mn-O Phase Diagram

Effect of Co 3+ Doping on Crystal Structure and Electrochemical Properties of Spinel LiMn 2 O 4 Cathode Material

IR Investigation and Electrochemical Properties of Li-doped Spinel Li 1 + x Mn 2 – x O 4 Prepared by a Simplified Technique

Surface Modification of Li1.03mn1.97o4 Spinels for Improved Capacity Retention

Synthesis and electrochemical properties of chemically substituted LiMn2O4 prepared by a solution-based gel method

Synthesis and Electrochemical Characterization of Ge&lt;sup&gt;4+&lt;/sup&gt;, Sn&lt;sup&gt;4+&lt;/sup&gt; Doped Spinel LiMn&lt;sub&gt;2&lt;/sub&gt;O&lt;sub&gt;4&lt;/sub&gt;