Abstract:The rapid and sensitive detection of bacterial contaminants using low-cost and portable point-of-need (PoN) biosensors has gained significant interest in water quality monitoring. Cell-imprinted polymers (CIPs) are emerging as effective and inexpensive materials for bacterial detection as they provide specific binding sites designed to capture whole bacterial cells, especially when integrated into PoN microfluidic devices. However, improving the sensitivity and detection limits of these sensors remains challenging. In this study, we integrated CIP-functionalized stainless steel microwires (CIP-MWs) into a microfluidic device for the impedimetric detection of E. coli bacteria. The sensor featured two parallel microchannels with three-electrode configurations that allowed simultaneous control and electrochemical impedance spectroscopy (EIS) measurements. A CIP-MW and a non-imprinted polymer (NIP)-MW suspended perpendicular to the microchannels served as the working electrodes in the test and control channels, respectively. Electrochemical spectra were fitted with equivalent electrical circuits, and the charge transfer resistances of both cells were measured before and after incubation with target bacteria. The charge transfer resistance of the CIP-MWs after 30 min of incubation with bacteria was increased. By normalizing the change in charge transfer resistance and analyzing the dose–response curve for bacterial concentrations ranging from 0 to 107 CFU/mL, we determined the limits of detection and quantification as 2 × 102 CFU/mL and 1.4 × 104 CFU/mL, respectively. The sensor demonstrated a dynamic range of 102 to 107 CFU/mL, where bacterial counts were statistically distinguishable. The proposed sensor offers a sensitive, cost-effective, durable, and rapid solution for on-site identification of waterborne pathogens.

IoT Based Portable Impedance Biosensor for Rapid Detection of Foodborne Pathogen

Design of Multiple Indexes Impedance Biosensor System

Design and Elementary Evaluation of a Highly-Automated Fluorescence-Based Instrument System for On-Site Detection of Food-Borne Pathogens

The Novel Immunobiosensors for Detection of Escherichia Coli O157:H7 Using Electrochemical Impedance Spectroscopy.

Research of a New Biosensor for Detecting Escherichia Coli O157:H7 with Electrochemical Impedance Spectroscopy

Protein detecting with smartphone-controlled electrochemical impedance spectroscopy for point-of-care applications

Design, Construction and Evaluation of a Portable Biosensor for Rapid Detection of E. Coli O157:H7

Fabric-based visualization biosensor for real-time environmental monitoring and food safety

Electrochemical Impedance Immunosensor Based on Self-Assembled Monolayers for Rapid Detection of Escherichia coli O157:H7 with Signal Amplification Using Lectin

Electrochemical Impedance Spectroscopy-Based Microfluidic Biosensor Using Cell-Imprinted Polymers for Bacteria Detection

An IoT-enabled paper sensor platform for real-time analysis of isothermal nucleic acid amplification tests

An Integrated Microfluidic Analysis Microsystems with Bacterial Capture Enrichment and In-Situ Impedance Detection

Design and Realization of a Rapid Food Pathogen Detection System

Cellphone based Portable Bacteria Pre-Concentrating microfluidic Sensor and Impedance Sensing System

Ratiometric fluorescent signals-driven smartphone-based portable sensors for onsite visual detection of food contaminants

Chip-based automated equipment for dual-mode point-of-care testing foodborne pathogens

Rapid Detection of Escherichia Coli O157:H7 and Salmonella Typhimurium in Foods Using an Electrochemical Immunosensor Based on Screen-Printed Interdigitated Microelectrode and Immunomagnetic Separation

On-Site Detection of Multiple Foodborne Pathogens Using a Paper-Based Isothermal Amplification Chip and a Smartphone-Based Portable Device

Intelligent Point of Care Test for Food Safety Via a Smartphone

A Fully Integrated Handheld Electrochemical Sensing Platform for Point-of-Care Testing of Escherichia coli O157:H7

A Low-Cost, 3D-Printed Biosensor for Rapid Detection of Escherichia coli