Abstract:Reinforced concrete (R/C) column memberswith low aspect ratio are adopted in high rise buildings frequently. This kind of member need to resist high axial loading and may suffer cyclic flexure-shear coupling deformation when subjecting severe earthquakes. The performance behavior of the structures with R/C short column is hard to predict. Kinds of analysis methods accounting flexure-axial coupled effects were proposed, however, few simulation model is proposed for R/C short column mainly impact by the flexure-shear coupling in three-dimensional situation. In this paper an improvement of Cyclic Soften Membrane Model (CSMM), basically deduced from Rotational Angle-Soften Truss Model (RA-STM) and Fixed Angle-Soften Truss Model (FA-STM), is proposed. Firstly, the equivalent uniaxial model adopted in CSMM, RA-STM and FA-STM is revised and develop based on Chang and Mander's concrete model to take into pinching effect. Secondly, the iteration algorithm of principle direction determination of strain and stress field is developed, which reduce the unstable and wrong direction phenomenon in Mohr Circle calculation in CSMM and FA-STM. Thirdly, the orthogonal strain directions with opposite sign is treated specially, for the unconditionally unstable caused by concrete constitutive function (one in tension and one in compression, while suddenly stepped into inversed strain status). The model has been implemented into the finite element program, OpenSees. Lateral cyclic static experiments were carried out on two RC short columns. The results deduced from the numerical model is compared with the experiment results, and it shows good agreements for the strength degradation and pinching effect. This result suggest that the FA-STM model provides sufficient accuracy and computational efficiency for nonlinear issues. And further researches will focus on the modification of the membrane material model for shell element and for large deformation issues.

Applicability Analysis of STM and SMCFT of RC Beams with Shear Span-Depth Ratios ≤ 3.0

Shear Capacity of an Existing RC Bridge Deck Slab: FE Analysis Using Continuum Elements

Static Shear Performance and Residual Axial Capacity of Rectangular RC Bridge Piers under Near-Ground Lateral Loads

Simplified Discontinuous Field Model for RC Beams with a Medium Shear Span Ratio: Experimental Study and Shear Strength Formula

Numerical Analysis on Concrete-Filled Wide Rectangular Steel Tubular (CFWRST) Stub Columns under Axial Compression

Study on shear design methods for reinforced and prestressed concrete beams

A numerical critical shear crack model and its application to post‐peak behavior assessment of RC and SFRC beams

Shear Strength Prediction for Reinforced Concrete Beams Without Stirrups

Shear Behavior of UHPC Beams with Small Shear Span to Depth Ratios Based on MSTM

Influence of Shear Span-to-Effective Depth Ratio on Behavior of High-Strength Reinforced Concrete Beams

Shear bearing capacity of steel-reinforced recycled aggregate concrete short beams based on modified compression field theory

Shear Strength Model for Reinforced Concrete Beams with Web Reinforcement

Study on Mechanical Behaviors and Calculation of Shear Strength of Steel Truss Reinforced Concrete Deep Beams

Prediction of Shear Strength of UHPC Beam with Small Shear Span to Depth Ratios Based on Modified MCFT

Decomposition of the Shear Capacity of Steel Fiber–Reinforced Concrete Coupling Beams

Shear Deformations of RC Beams under Service Loads

Shear Behavior of Concrete Beam Reinforced in Shear with Carbon Fiber-Reinforced Polymer Mesh Fabric (CFRP-MF) Configuration

Seismic Analysis Of R/C Short Column Member With Modified Csmm, Fa-Stm And Ra-Stm Theory

Shear Strength Prediction of Rc Beams Wrapped with Frp

Theoretical and experimental analyses of critical shear angle of RC beam

Shear performance of deep partially precast high-strength steel reinforced UHPC T-beam: Experimental study and a novel shear model