Abstract:One of the most challenging elements of modeling the behaviour of reinforced concrete (RC) walls is combining realistic material models that can capture the observable behaviour of the physical system. Experiments with realistic loading rates and pressures reveal that steel and concrete display complicated nonlinear behaviour that is challenging to represent in a single constitutive model. To investigate the response of a reinforced concrete structure subjected to dynamic loads, this paper's study is based on many different material models to assess the advantages and disadvantages of the models on 2D and 3D RC walls using the LS-DYNA program. The models consisted of the KCC model and the CDP model, which represented plasticity and distinct tensile/compressive damage models, and the Winfrith model, which represented plasticity and the smeared crack model. Subsequently, the models' performances were assessed by comparing them to experimental data from reinforced concrete structures, in order to validate the accuracy of the overall behaviour prediction. The Winfrith model demonstrated satisfactory results in predicting the behaviour of 2D and 3D walls, including maximum strength, stiffness deterioration, and energy dissipation. The method accurately predicted the maximum strength of the Winfrith concrete model for the 2D wall with an error of 9.24% and for the 3D wall with errors of 3.28% in the X direction and 5.02% in the Y direction. The Winfrith model demonstrated higher precision in predicting dissipation energy for the 3D wall in both the X and Y directions, with errors of 6.84% and 6.62%, correspondingly. Additional parametric analyses were carried out to investigate structural behaviour, taking into account variables such as concrete strength, strain rate, mesh size, and the influence of the element type.

Optimum Strut-and-Tie Models for Reinforced Concrete Beams

Probabilistic Code-Based Shear Capacity Model for I-shaped Steel Reinforced Concrete (SRC) Beams

Nonlinear Finite-Element Analysis of the Seismic Behavior of RC Column–Steel Beam Connections with Shear Failure Mode

Strut-And-Tie Model Research On Bridge Column-Pile-Footing

Assesment of Proposed Models for Determining Allowable Frp Tensile Strain for Mitigation of Debonding Failure in Frp-Strengthened Rc Beams

Strut-and-tie model for FRP effectiveness in shear strengthening of RC deep beams

Direct Strut-and-Tie Model for Ultimate Shear Strength of Reinforced Concrete Structural Walls

A Design Proposal for Concrete Cover Separation in Beams Strengthened by Various Externally Bonded Tension Reinforcements

Strut and tie model for CFRP strengthened reinforced concrete corbels

Analytical Model for Concrete Cover Separation of FRP Strengthened RC Beams with Multiple Steel Bolts

A New Flexural Strength Model of CFRP-strengthened RC Beams with Intermediate Crack Induced Debonding Failure

Multivariable Regression Strength Model for Steel Fiber-Reinforced Concrete Beams under Torsion

A unifying strut-and-tie model for conventionally reinforced link beams

Development of Prediction Models for the Torsion Capacity of Reinforced Concrete Beams Using M5P and Nonlinear Regression Models

Reinforced Concrete Slabs And Steel-Concrete Composite Beams Under Pure Torsion

Effective Prediction of Concrete Constitutive Models for Reinforced Concrete Shear Walls under Cyclic Loading

Strength reduction factor based on probabilistic analysis for hybrid reinforced concrete beams

Study on the deformation of hybrid BFRP-steel reinforced concrete beams considering crack development

A Comprehensive Study on the Effect of Reinforcing Methods on the Flexural Behaviour of Concrete-RUHTCC Composite Beams

ABAQUS modeling for post-tensioned reinforced concrete beams

Shear performance of deep partially precast high-strength steel reinforced UHPC T-beam: Experimental study and a novel shear model