Abstract:Experimental Advanced Superconducting Tokamak (EAST), as a fully superconducting tokamak in China, aims to achieve high performance plasma under steady-state operation. To fulfill the physical objectives of EAST, a program of 4-MW long pulse electron cyclotron resonance heating and current drive (EC H&CD) system, which would offer greater flexibility for plasma shape and plasma stabilization has been launched on EAST since 2011. The system, composed of 4 gyrotrons with nominal 1MW output power and 1000s pulse length each, is designed with the feature of steerable power handling capabilities at 140 GHz, using second harmonic of the extraordinary mode(X2). The missions of the ECRH system are to provide plasma heating, current drive, plasma profile tailoring and control of magneto-hydrodynamic (MHD) instabilities. Presently, the first two 140-GHz 1-MW gyrotrons, provided by GYCOM and CPI, respectively, have been tested at long pulse operation. The tubes, the associated power supplies, cooling system, cryogenic plant, 2 transmission lines and an equatorial launcher are now installed at EAST. The power generated from each tube will be transmitted by an evacuated corrugated waveguide transmission line and injected into plasma from the low field side (radial port) through a front steering equatorial launcher. Considering the diverse applications of the EC system, the beam's launch angles can be continuously varied with the optimized scanning range of over 30 degrees in poloidal direction and similar to 25 degrees in toroidal, as well as the polarization could be adjusted during the discharge by the orientations of a pair of polarizers in the transmission line to maintain the highest absorption for different operational scenarios. The commissioning of the first 2MW ECRH plant for EAST is under way. The design, R&D activities and recent progress of the long pulse 140-GHz ECRH system are presented in this paper. As the technological requirements for EAST ECRH have many similarities with ITER devices, the installation and experience of EAST ECRH system may provide valuable data for the ITER.

Stress Analysis and Design of the Waveguide Bellows for EAST ECRH System

Research Activities and Progress on the Long Pulse ECRH Launcher for EAST

RF calculation and thermal-stress analysis of the ECRH launcher on EAST tokamak

The Design of Corrugated Waveguide Taper for EAST ECRH System

thermal and stress_strain analysis of the tested iter-like w langmuir probes in east

R&D of a Strain Monitoring System for the EAST Tungsten Divertor

Research on long pulse ECRH system of EAST in support of ITER

Design of A Te10 Taper Used in the Lhcd Launcher for East

Electromagnetic Properties of 4.6 GHz Multijunction Waveguide Array Antenna on EAST

Thermal and Stress Analysis of the Planar Slow Wave Structure for Ka-band TWT

Fully Active Cooled In-vessel Components of EAST Tokamak

Progress of High Power and Long Pulse ECRH System in EAST

Design of a TE<sub>10</sub>Taper Used in the LHCD Launcher for EAST

Thermal-Mechanical Analysis for In-Vessel Diagnostic Components in W7-X

The Design of C - Band Continuous Wave High Power Water Load

Analysis of the Cryogenic System Behavior for Pulsed Heat Load in EAST

Application of E-Beam Welding in W/Cu Divertor Project for EAST

Design of C Band High Power Teflon Water Load

Development and Preliminary Commissioning Results of a Long Pulse 140 GHz ECRH System on EAST Tokamak (Invited)

Preliminary Design and Thermo-Mechanical Analysis of the ECRH Equatorial Launcher Focusing Mirror (M1) Towards the CFETR

Design and Analysis of Cooling Water System for ECRH and ICRF Testing Bench