Abstract:A new nondestructive pressure-measurement method that can avoid potential safety problems caused by applying traditional pressure-measurement methods in vessels is presented. This method utilizes ultrasonic Rayleigh waves and critically refracted longitudinal waves ( L CR waves). The change in pressure induces a change in the stresses in the vessel's wall. According to the acoustoelastic principle, variations in stress affect the wave velocity. Meanwhile, the velocity of ultrasonic waves can also be affected by the change in temperature. Considering the effect of the pressure and temperature of the vessel on both the wave velocity and propagation distance of the ultrasonic waves, the relationship between ultrasonic transit time delay and both the pressure and temperature change is established. Furthermore, a modified model of pressure measurement is deduced. With this model, a reference method for temperature compensation, without temperature measurement, is presented. The reference method utilizes Rayleigh waves and L CR waves. These two kinds of ultrasonic waves travel along the axial direction of the vessel's wall, bearing the same changes in pressure and temperature. The relationship between the reference transit time delay between two ultrasonic transducers and the pressure is established through theoretical analysis and calibration tests on an air vessel. To reduce the error caused by the unevenness of temperature distribution, which might occur in the vessel's and the transducer's material, a new kind of transducer is used in the experiment, which has two piezoelectric elements and can be used for the Rayleigh and L CR waves. A pair of such transducers is mounted along the axial direction of the air vessel. The penetration area of the Rayleigh wave is almost the same as that of the L CR wave with the use of the new transducers. Comparison tests between the new transducers and the custom-used transducers show that the new transducers have better repeatability. Finally, using the air vessel as a specimen, experimental results show that the reference method is effective and that the pressure values calculated using the reference method are close to the manometer-measured values.

Measurement Using Flexural Ultrasonic Transducers in High Pressure Environments

A Capacitive Pressure Sensor with Adjustable Working Range for Deep Sea

Nondestructive Pressure Measurement in Vessels Using Rayleigh Waves and <formula> <tex>$l_{\rm CR}$</tex> </formula> Waves

Nondestructive Pressure Measurement in Vessels Using Rayleigh Waves and L-Cr Waves

A new method for nondestructively measuring pressure based on the Rayleigh wave

A New Nondestructive Technique for Measuring Pressure in Vessels by Surface Waves

An Electrostatic Comb Excitation Resonant Pressure Sensor for High Pressure Applications

Pressure Measurement Based on Multi-Waves Fusion Algorithm

Simultaneous Measurement of Elastic Moduli, Attenuation, Density, and Thickness of a Layer by Ultrasonic Spectroscopy Using Point-Focus Transducer

Research on Novel CMUTs for Detecting Micro-Pressure with Ultra-High Sensitivity and Linearity

A resonant high-pressure microsensor based on a composite pressure-sensitive mechanism of diaphragm bending and volume compression

Ultrasonic Pressure Measurement in Pressure Vessels

Ultrasensitive Pressure Sensor Based on an Integrated Circular Piezoelectric MEMS Resonator and Diaphragm Structure

Dual-Use Strain Sensors for Acoustic Emission and Quasi-Static Bending Measurements

Pressure Sensor Based on the Time-Interval Between Neighboring Longitudinal Waves

CMUT cavity pressure measurement using an atomic force microscope

A High-Precision Quartz Resonant Ultra-High Pressure Sensor with Integrated Pressure Conversion Structure

Stress Measurement of a Pressurized Vessel Using Ultrasonic Subsurface Longitudinal Wave With 1-3 Composite Transducers

Ultrasonic waveguide based level measurement using flexural mode F(1,1) in addition to the fundamental modes

The Resonance Vibration Properties of a Bimorph Flexural Piezoelectric Ultrasonic Transducer for Distance Measurement

Dry Coupling of Ultrasonic Transducer Components for High Temperature Applications