Abstract:<div class="abstract-group"> <section class="article-section article-section__abstract" lang="en" data-lang="en" id="section-1-en"> <h3 class="article-section__header main abstractlang_en main">Summary</h3> <div class="article-section__content en main"> <p>A core design of small modular liquid‐metal fast reactor (SMLFR) cooled by lead‐bismuth eutectic (LBE) was developed for power reactors. The main design constraint on this reactor is a size constraint: The core needs to be small enough so that (1) it can be transported in a spent nuclear fuel (SNF) cask to meet the electricity demands in remote areas and off‐grid locations or so that (2) it can be used as a power source on board of nuclear icebreaker ships. To satisfy this design requirement, the active core of the reactor is 1 m in height and 1.45 m in diameter. The reactor is fueled with natural and 13.86% low‐enriched uranium nitride (UN), as determined through an optimization study. The reactor was designed to achieve a thermal power of 37.5 MW with an assumption of 40% thermal efficiency by employing an advanced energy conversion system based on supercritical carbon dioxide (S‐CO<sub>2</sub>) as working fluid, in which the Brayton cycle can achieve higher conversion efficiencies and lower costs compared to the Rankine cycle. The outer region of the core with low‐enriched uranium (LEU) performs the function of core ignition. The center region plays the role of a breeding blanket to increase the core lifetime for long cycle operation. The core working fluid inlet and outlet temperatures are 300°C and 422°C, respectively. The primary coolant circulation is driven by an electromagnetic pump. Core performance characteristics were analyzed for isotopic inventory, criticality, radial and axial power profiles, shutdown margins (SDM), reactivity feedback coefficients, and integral reactivity parameters of the quasi‐static reactivity balance. It is confirmed through depletion calculations with the fast reactor analysis code system Argonne Reactor Computation (ARC) that the designed reactor can be operated for 30 years without refueling. Preliminary thermal‐hydraulic analysis at normal operation is also performed and confirms that the fuel and cladding temperatures are within normal operation range. The safety analysis performed with the ARC code system and the UNIST Monte Carlo code MCS shows that the conceptual core is favorable in terms of self‐controllability, which is the first step towards inherent safety. </p>

NEUTRON PHYSICAL FEASIBILITY OF SMALL MODULAR DESIGN OF DUAL FLUID REACTOR

Numerical Study of Flow and Heat Transfer Characteristics in a Simplified Dual Fluid Reactor

Preliminary Conceptual Design with Neutronics and Thermal-Hydraulics Assessments of FuSTAR

Thermal-hydraulic Design and Analysis of a Small Modular Molten Salt Reactor (MSR) with Solid Fuel

Preliminary Design and Study of a Small Modular Chlorine Salt Fast Reactor Cooled by Supercritical Carbon Dioxide

Conceptual Design of a Small Modular Natural Circulation Lead Cooled Fast Reactor SNCLFR-100

Preliminary Conceptual Design of a Small High-Flux Multi-Purpose LBE Cooled Fast Reactor

Preliminary Neutronic and Thermal-Hydraulic Analysis of a 2 MW Thorium-based Molten Salt Reactor with Solid Fuel

Core design of long‐cycle small modular lead‐cooled fast reactor

Conceptual Design and Feasibility Analysis of a Modular Supercritical CO2 Fast Reactor Core

Conceptual Design of an Innovative Reduced Moderation Thorium‐fueled Small Modular Reactor with Heavy‐water Coolant

Preliminary Design of a Medium-Power Modular Lead-Cooled Fast Reactor with the Application of Optimization Methods

Preliminary Analysis and Design of the Energy Conversion System for the Molten Salt Fast Reactor

Generative Design of a Gas-Cooled Micro Reactor Based on Multi-Physics Analysis

A Draft Design of a Zero-Power Experiment for Molten Salt Fast Reactor Studies

Neutronic Analysis of Modular Gas-cooled Fast Reactor for 5-25% of Plutonium Fuel using Parallelization MCNP6 Code

Preliminary Neutronics Analyses of China Dual-Functional Lithium-Lead (DFLL) Test Blanket Module for CFETR

Neutron/Gamma Radial Shielding Design of Main Vessel in a Small Modular Molten Salt Reactor

Conceptual design and supporting analysis of a double wall heat exchanger for an ARC-class fusion reactor Primary cooling system

Neutronic/Thermal-Hydraulic Design Features Of An Improved Lead-Bismuth Cooled Small Modular Fast Reactor

Three-dimensional thermal hydraulic analysis of a transportable fluoride-salt-cooled high-temperature reactor