Abstract:Flexure mechanisms with decoupled characteristics have been widely utilized in precision positioning applications. However, these mechanisms suffer from either slow response or low load capability. Furthermore, asymmetric design always leads to thermal error. In order to solve these issues, a novel 2-DOF decoupled mechanism is developed by monolithically manufacturing sets of statically indeterminate symmetric (SIS) flexure structures in parallel. Symmetric design helps to eliminate the thermal error and Finite Element Analysis (FEA) results show that the maximum coupling ratio between X and Y axes is below 0.25% when a maximum pretension force of 200 N is applied. By ignoring the mass effect, all the SIS flexure structures are simplified to “spring-damper” components, from which the static and dynamics model are derived. The relation between the first resonant frequency of the mechanism and the load is investigated by incorporating the load mass into the proposed dynamics model. Analytical results show that even with a load of 0.5 kg, the first resonant frequency is still higher than 300 Hz, indicating a high load capability. The mechanism’s static and dynamic performances are experimentally examined. The linear stiffnesses of the mechanism at the working platform and at the driving point are measured to be 3.563 0 N·μm−1 and 3.362 1 N·μm−1, respectively. The corresponding estimation values from analytical models are 3.405 7 N·μm−1 and 3.381 7 N·μm−1, which correspond to estimation errors of −4.41% and 0.6%, respectively. With an additional load of 0.16 kg, the measured and estimated first resonant frequencies are 362 Hz and 365 Hz, respectively. The estimation error is only 0.55%. The analytical and experimental results show that the developed mechanism has good performances in both decoupling ability and load capability; its static and dynamic performance can be precisely estimated from corresponding analytical models. The proposed mechanism has wide potentials in precision positioning applications.

Design of a Controlled-Stiffness Flexure Mechanism Based on the FACT Method

Multi-actuated Mechanism Design Considering Structure Flexibility Using Correlated Performance Reinforcing

Design of a Flexure-Based Mechanism Possessing Low Stiffness and Constant Force

Design and Analysis of Folding Mechanism for Intelligent Wheelchair-Stretcher Robot

Analysis and Design of Large Stroke Series Flexure Mechanism

Design and Analysis of a Novel Flexure-Based 3-DOF Mechanism

Design, Identification and Control of a 2-Degree of Freedom Flexure-Based Mechanism for Micro/Nano Manipulation

State-of-arts of Design Method for Flexure Mechanisms

Design and Dynamic Modeling of a 2-DOF Decoupled Flexure-Based Mechanism

Design of Flexure Hinges in an H-Drive Precision Stage with a Large Span

Design and Analysis of a Multi-Notched Flexure Hinge for Compliant Mechanisms

Design of a Novel Compliant Constant-Force Mechanism with High Lateral Stiffness

Extended Dynamic Stiffness Model for Analyzing Flexure-Hinge Mechanisms With Lumped Compliance

Design and Analysis of a Contact-Aided Flexure Hinge (CAFH) with Variable Stiffness

Stiffness Influence Atlases of a Novel Flexure Hinge-Based Parallel Mechanism with Large Workspace

Kinetostatic and Dynamic Modeling of Flexure-Based Compliant Mechanisms: A Survey

A compliant guiding mechanism utilizing orthogonally oriented flexures with enhanced stiffness in degrees-of-constraint

Design, Analysis and Testing of a New Compliant Compound Constant-Force Mechanism

The STAGE method for simultaneous design of the stress and geometry of flexure mechanisms

Design of Compliant Straight-Line Mechanisms Using Flexural Joints

Stiffness estimation of the flexure-based five-bar micro-manipulator