Abstract:Torpedo anchors represent a promisingly innovative anchorage foundation for deep water applications due to their efficient and economical installation. During installation, a significant length of mooring chain was embedded into the seabed alongside the torpedo anchor. This interaction between the chain and the soil alters the strength characteristics of the clay, and also affect the loading angle at the padeye during pullout. As a result, the bearing capacity of the torpedo anchor is influenced by the movement of the chain. However, existing numerical studies lack a comprehensive understanding of the pullout performance of torpedo anchors, particularly in considering the presence of mooring chains. This study endeavors to investigate the pullout capacity of torpedo anchors in clay, accounting for the effect of the mooring chain attached to the padeye, utilizing the large deformation finite element method (LDFE). The elastic-perfectly plastic material model, adhering to the modified Tresca yield criterion, was employed. Verification of the model's accuracy and effectiveness was conducted through centrifuge test results. The influence of the mooring chain and loading angle on the pullout capacity were investigated. The findings indicate that the discrepancy in the bearing capacity of torpedo anchors, with and without considering the mooring chain, increases from 3% to 38.4% as the loading angle rises from 0 degrees to 75 degrees. Conversely, for vertical loading, the difference decreases to 7%. Based on the numerical analysis, normalized V-H envelopes were provided. This work contributes valuable insights into the capacity of torpedo anchors.

Vertical Pullout Behaviour of a Torpedo Anchor Vertically in Stiff-Over-Soft Cohesive Soil Bed

Maximum Vertical Pullout Force of Torpedo Anchors in Cohesive Seabeds at Different Steady Pullout Velocities

Vertical Holding Capacity of Torpedo Anchors in Underwater Cohesive Soils

Maximum Force of Inclined Pullout of A Torpedo Anchor in Cohesive Beds

Behaviors of Drag Embedment Anchor in Layered Clay Profiles

Penetration Depth of Torpedo Anchor in Two-Layered Cohesive Soil Bed by Free Fall

Penetration Depth of Torpedo Anchor in Cohesive Soil by Free Fall

Free-Fall Penetration Behaviors of A New Dynamically Installed Plate Anchor in Marine Clay

Dynamic Installation Behaviors of A New Hybrid Plate Anchor in Layered Marine Clay

Centrifuge Modelling of Suction Anchor Subjected to Inclined Load in Soft Clay

The Bearing Capacity of Torpedo Anchor in Clay under Inclined Loading of Mooring Chain

Model Tests on Penetration and Pullout of Suction Caissons in Silt

Numerical modelling on anchor-soil-water interaction for dynamic installation of gravity installed anchors

Numerical Investigations on Pore-Pressure Response of Suction Anchors under Cyclic Tensile Loadings

Soil Deformation and Erosion Near Mooring Chains in Clay Based on Cyclic T-Bar Tests

Behavoir Of Installation For Suction Anchor In Soft Clay

Numerical Study of Quasi-Static to Dynamic Pullout Capacity of Anchors in Sand

Inclined Loading Capacity of Caisson Anchor in South China Sea Carbonate Sand Considering the Seabed Soil Loss

Seabed Trenching Near the Mooring Anchor: History Cases and Numerical Studies

Reliability-based evaluation of ultimate embedment depths of torpedo anchors in spatially variable clay

Pull-out Model Test for Tunnel Anchorage and Numerical Analysis