Computational screening of M/Cu core/shell nanoparticles and their applications for the electro-chemical reduction of CO2 and CO

Huilong Dong,Cheng Liu,Youyong Li,De-en Jiang

DOI: https://doi.org/10.1039/c9nr01936g

IF: 6.7

2019-01-01

Nanoscale

Abstract:The computationally screened Fe19@Cu60 CSNP shows superior electro-catalytic performance for CO2 reduction.

What problem does this paper attempt to address?

Computational Screening Of M/Cu Core/Shell Nanoparticles And Their Applications For The Electro-Chemical Reduction Of Co2 And Co

Huilong Dong,Cheng Liu,Youyong Li,De-En Jiang

DOI: https://doi.org/10.1039/c9nr01936g

IF: 6.7

2019-01-01

Nanoscale

Abstract:To improve the catalytic activity of copper nanoparticles (Cu NPs) in the electro-chemical catalysis of the CO2 reduction reactions (CO(2)RRs), the formation and use of core/shell nanoparticles (CSNPs) with Cu as the shell composite may be an effective way. Using Cu-79 NP as the representative, we performed computational screening and confirmed four M-x@Cu79-x CSNPs that can stably exist. Then, the catalytic performance of the screened CSNPs was tested through first-principles calculations. The free energy profiles indicate that Fe-19@Cu-60 is more desirable for CO2RR catalysis due to its high selectivity for CO rather than HCOOH at a low potential. Moreover, when it electro-catalyzes CO2 into CH4, the Fe-19@Cu-60 CSNP exhibits much lower limiting potential (-0.58 V) compared with pure Cu-79 NP (-0.86 V) or the Cu (211) surface (-0.70 V). Taking the cost into consideration, the Fe-19@Cu-60 CSNP is highly recommended as a promising electro-catalyst for CO(2)RRs. In addition, when CO is taken as the initial reactant to be reduced, all the screened CSNPs exhibit lower limiting potentials than Cu-79 NP. From the view of material design, the significant weakening of CO binding originating from the change in the d-band center could be the reason why the formation of a core/shell structure will enhance the catalytic performance of Cu NPs in CO reduction.
Manipulating Cu Nanoparticle Surface Oxidation States Tunes Catalytic Selectivity Toward CH4 or C2+ Products in CO2 Electroreduction

Qikui Fan,Xue Zhang,Xiaohu Ge,Licheng Bai,Dongsheng He,Yunteng Qu,Chuncai Kong,Jinglei Bi,Dawei Ding,Yueqiang Cao,Xuezhi Duan,Jin Wang,Jian Yang,Yuen Wu

DOI: https://doi.org/10.1002/aenm.202101424

IF: 27.8

2021-01-01

Advanced Energy Materials

Abstract:Herein, a facile seed-assisted strategy for preparing Cu nanoparticles (NPs) with polyvinyl pyrrolidone (PVP) capping is presented. Compared to the Cu NPs with deficient PVP protection, the Cu NPs capped with a sufficient amount of PVP remain almost completely as Cu-0 species. In contrast, the Cu NPs that are considered PVP deficient form an oxide structure in which the inner layer is face-centered cubic Cu and the outer layer is, at least in part, made up of Cu2O species. Furthermore, to eliminate CO2 molecule diffusion and simultaneously obtain significant current density (200 mA cm(-2)) for industrial applications, a flow cell configuration is used for carbon dioxide electro reduction reaction (CO2RR) testing in 0.5 m potassium hydroxide solution. The Cu NPs with zero valence deliver Faradaic efficiencies (FEs) for the CO2 reduction to CH4 of over 70%, with a current density exceeding 200 mA cm(-2), outstripping the performances of the majority of the reported CO2 electrocatalysts. Interestingly, the distribution of products catalyzed by the Cu NPs with +1 valence includes multicarbon products (C2+) such as C2H4, C2H5OH, CH3COOH, and C3H7OH with combined FEs of >80%, with current densities of up to 300 mA cm(-2). The above results unambiguously establish that surface oxidation of Cu species plays a crucial role in the CO2RR.
Core–shell nanoporous AuCu3@Au monolithic electrode for efficient electrochemical CO2 reduction

Xiaoming Ma,Yongli Shen,Shuang Yao,Cuihua An,Weiqing Zhang,Junfa Zhu,Rui Si,Chunxian Guo,Changhua An

DOI: https://doi.org/10.1039/c9ta09471g

IF: 11.9

2020-01-01

Journal of Materials Chemistry A

Abstract:Monolithic bulk nanoporous core–shell AuCu3@Au has been synthesized through a facile oxidative etching of the Au20Cu80 alloy, which exhibits high efficiency for the electrocatalytic reduction of CO2 in a broad potential window.
Computational screening of effective g-C 3 N 4 based single atom electrocatalysts for the selective conversion of CO 2

Huiwen Zhu,Shuai Liu,Jiahui Yu,Quhan Chen,Xinyi Mao,Tao Wu

DOI: https://doi.org/10.1039/d3nr00286a

IF: 6.7

2023-01-01

Nanoscale

Abstract:Scheme diagram illustrating the computation screening process of effective g-C 3 N 4 based single atom electrocatalysts for the selective conversion of CO 2 .

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Computational Screening of Core@shell Nanoparticles for the Hydrogen Evolution and Oxygen Reduction Reactions.

Benjamin Corona,Marco Howard,Liang Zhang,Graeme Henkelman

DOI: https://doi.org/10.1063/1.4972579

IF: 4.304

2016-01-01

The Journal of Chemical Physics

Abstract:Using density functional theory calculations, a set of candidate nanoparticle catalysts are identified based on reactivity descriptors and segregation energies for the oxygen reduction and hydrogen evolution reactions. Trends in the data were identified by screening over 700 core@shell 2 nm transition metal nanoparticles for each reaction. High activity was found for nanoparticles with noble metal shells and a variety of core metals for both reactions. By screening for activity and stability, we obtain a set of interesting bimetallic catalysts, including cases that have reduced noble metal loadings and a higher predicted activity as compared to monometallic Pt nanoparticles.
Copper nanoparticle interspersed MoS2 nanoflowers with enhanced efficiency for CO2 electrochemical reduction to fuel

Guodong Shi,Luo Yu,Xin Ba,Xiaoshu Zhang,Jianqing Zhou,Ying Yu

DOI: https://doi.org/10.1039/c6dt04381j

IF: 4

2017-01-01

Dalton Transactions

Abstract:Electrocatalytic conversion of carbon dioxide (CO2) has been considered as an ideal method to simultaneously solve the energy crisis and environmental issue around the world.
Synergized Cu/Pb Core/Shell Electrocatalyst for High-Efficiency CO 2 Reduction to C 2+ Liquids

Pengtang Wang,Hao Yang,Yong Xu,Xiaoqing Huang,Juan Wang,Miao Zhong,Tao Cheng,Qi Shao

DOI: https://doi.org/10.1021/acsnano.0c07869

IF: 17.1

2020-12-30

ACS Nano

Abstract:The design of efficient copper-based (Cu-based) carbon dioxide reduction (CO2RR) electrocatalysts is crucial for converting CO2 to value-added liquid products. In this work, we demonstrate that the strong synergy between Cu core and ultrathin lead (Pb) shell (0.7 nm) in the Cu/Pb core/shell nanocrystals (NCs, CuPb-0.7/C) significantly boosts the electrocatalytic reduction of CO2 toward C2+ products (products with at least two carbon atoms). Specifically, when applying in a flow cell system, the Faradaic efficiency (FE) of total C2+ products and the selectivity of C2+ liquid products are as high as 81.6% and 49.5%, respectively. Moreover, the current density of C2+ liquid products reaches 196.8 mA cm–2, outperforming most of the reported Cu-based catalysts for CO2RR toward the production of C2+ liquid products. Density functional theory calculations indicate that the synergized Cu/Pb core/shell NCs reduce the formation energies of *COOH and *OCCOH intermediates, as the two critical intermediates for the reduction of CO2 to CO and the formation of C2+ products, respectively, and leads to the significant increase in the selectivity of C2+ liquid products. This study provides a efficient Cu-based catalyst for the reduction of CO2, highlighting the importance of synergistic effect for the design of electrocatalysts in catalysis.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsnano.0c07869?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsnano.0c07869</a>.Detailed information on diameter statistics, shell thickness analysis, composition analysis, morphology and phase characterizations, CO2RR products analysis, and CO2RR performance for Cu/Pb core/shell catalysts and compared catalysts (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.0c07869/suppl_file/nn0c07869_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Nanostructured Copper-Based Electrocatalysts for CO2 Reduction

Zhengxiang Gu,Hao Shen,Longmei Shang,Ximeng Lv,Linping Qian,Gengfeng Zheng

DOI: https://doi.org/10.1002/smtd.201800121

IF: 12.4

2018-01-01

Small Methods

Abstract:The continuous increase of CO2 concentration in the atmosphere has been imposing an imminent threat for global climate change and environmental hazards. In recent years, the electrochemical or photochemical conversion of CO2 into value-added chemicals or fuels has received significant attention, as it may enable an attractive means to mitigate the atmospheric CO2 concentration and complete the imbalanced carbon-neutral energy cycle, as well as create renewable energy resources for human use. Among the different electrocatalysts being studied, Cu-based materials have been demonstrated as the only category of candidates that allows the conversion of CO2 into a variety of reducing products, including carbon monoxide, hydrocarbons, and alcohols. Herein, the reaction pathways for different Cu-based catalysts for C-1 and C2+ products are introduced. Then, different parameters in tuning Cu-based electrocatalysts are summarized and discussed, including the morphologies, compositions, crystal facets, and oxide derivation. In addition, various types of parameters for CO2 electroreduction are also described, particularly the option of electrolytes such as aqueous, ionic liquids, and organic solutions. Finally, the current challenges are discussed and the potential strategies to facilitate the future development of CO2 electroreduction are summarized.
Engineering Bimetallic Copper‐Tin Based Core‐Shell Alloy@Oxide Nanowire as Efficient Catalyst for Electrochemical CO 2 Reduction

Yifan Wu,Xiaoyang Deng,Hefeng Yuan,Xiaowei Yang,Jianxing Wang,Xiaoguang Wang

DOI: https://doi.org/10.1002/celc.202100623

IF: 4

2021-07-14

ChemElectroChem

Abstract:Pursuing both high effective and selective electrocatalysts is significant for efficient and low-cost electrochemical carbon dioxide (CO2) reduction. Here, we design a novel bimetallic alloy/oxide nanowire catalyst with core-shell configuration. A typical CuSn alloy core provides high electrical conductivity while the amorphous Cu doped SnO2 shell guarantees the catalytic activity and selectivity for CO2 reduction process. Computational studies further elucidate the important role of Cu doped SnO2 layer in the electrocatalytic selectivity for formate and the restraint of hydrogen production. Benefited from the well-designed components and hierarchical configuration, the as-prepared electrocatalyst displays a partial current density of 30 mA cm−2 with a Faradaic efficiency of 78 % at −0.9 V vs. reversible hydrogen electrode (RHE) for formate. This work provides a new pathway to design advanced electrocatalyst for CO2 electrochemical reduction.

electrochemistry
Nanostructured Copper‐Based Electrocatalysts for CO2 Reduction

Zhengxiang Gu,Hao Shen,Longmei Shang,Ximeng Lv,Linping Qian,Gengfeng Zheng

DOI: https://doi.org/10.1002/smtd.201800121

IF: 12.4

2018-01-01

Small Methods

Abstract:AbstractThe continuous increase of CO2 concentration in the atmosphere has been imposing an imminent threat for global climate change and environmental hazards. In recent years, the electrochemical or photochemical conversion of CO2 into value‐added chemicals or fuels has received significant attention, as it may enable an attractive means to mitigate the atmospheric CO2 concentration and complete the imbalanced carbon‐neutral energy cycle, as well as create renewable energy resources for human use. Among the different electrocatalysts being studied, Cu‐based materials have been demonstrated as the only category of candidates that allows the conversion of CO2 into a variety of reducing products, including carbon monoxide, hydrocarbons, and alcohols. Herein, the reaction pathways for different Cu‐based catalysts for C1 and C2+ products are introduced. Then, different parameters in tuning Cu‐based electrocatalysts are summarized and discussed, including the morphologies, compositions, crystal facets, and oxide derivation. In addition, various types of parameters for CO2 electroreduction are also described, particularly the option of electrolytes such as aqueous, ionic liquids, and organic solutions. Finally, the current challenges are discussed and the potential strategies to facilitate the future development of CO2 electroreduction are summarized.
Screening binary alloys for electrochemical CO2 reduction towards multi-carbon products

Jiang Li,Joakim Halldin Stenlid,Michael T. Tang,Hong-Jie Peng,Frank Abild-Pedersen

DOI: https://doi.org/10.1039/d2ta02749f

IF: 11.9

2022-01-01

Journal of Materials Chemistry A

Abstract:Electrochemical reduction of CO2 (eCO(2)R) to high-value chemicals presents an attractive approach for utilizing CO2. Copper (Cu) is presently the only electrocatalyst that fulfills this purpose with notable activity, but selectivity remains a problem. To identify catalysts for eCO(2)R with high selectivity towards multicarbon (C2(+)) products, we explore binary systems composed of strongly and weakly CO binding metals alloyed with Cu, Fe, Co, Ni, and Pd. A total number of 142 alloys with two commonly studied configurations, L1(2) and L1(0), are simulated with density functional theory (DFT). We leverage recent progress in the atomistic understanding of the eCO(2)R mechanism and use the binding energies of CO* and C* as descriptors when screening for C2(+) selectivity. We evaluate the stability of the binary alloys by analyzing the formation energy of the clean alloy surfaces. Our theoretical screening identifies about 16 Cu-based alloys and 18 non-Cu based alloys with optimal C2(+) selective properties for eCO(2)R. For the non-Cu based binary alloys, the p-block elements play an important role in tuning the C* and CO* adsorption energies. In terms of stability, most of the Cu-based systems alloyed with metals that exhibit strong CO* binding are unstable. Ni-based alloys are more stable than the Co-based alloys followed by the Fe-based alloys, and all the Pd-based alloys are stable. In general, the L1(0) structural Fe, Co, Ni, and Pd-based alloys are more stable than the corresponding L1(2) alloys. Our approach identifies materials known to have good C2(+) selectivity, but it also proposes several other promising materials that have not previously been tested for eCO(2)R.
Highly selective and active Cu-In2O3/C nanocomposite for electrocatalytic reduction of CO2 to CO

Yanzhu Ye,Ying Liu,Zhongshui Li,Xiaohuan Zou,Hui Wu,Shen Lin

DOI: https://doi.org/10.1016/j.jcis.2020.10.118

2021-03-15

Abstract:The Cu-In2O3/C nanocomposite was prepared by a simple solid-phase reduction method. The introduction of In2O3 into Cu/C to form the Cu-In2O3/C nanocomposite evidently enhances the electrocatalytic activity for the selective reduction of CO2 to CO. Specifically, the Cu-In2O3/C nanocomposite exhibits higher Faraday efficiency (FE = 86.7%) at -0.48 V vs. the reversible hydrogen electrode (RHE) in the electrocatalytic reduction of CO2 to CO and larger current densities (55 mA cm-2) under a low overpotential (-1.08 V vs. RHE). These indicate its superior performance over many of the reported Cu-based catalysts [1-4]. It was also found that by rationally adjusting the applied potential, tunable syngas can be formed, which can be used to synthesize formic acid, methyl ether, methanol, synthetic fuels, or other bulk chemicals through appropriate industrial processes. Furthermore, the Cu-In2O3/C nanocomposite maintains good stability in the electrocatalytic reduction of CO2. This work demonstrates a novel strategy to convert CO2 into desired products with high energy efficiency and large current density under low overpotential by the rational designing of non-precious metal catalysts.
CuSn Alloy Nanoparticles on Nitrogen‐Doped Graphene for Electrocatalytic CO2 Reduction

Wei Xiong,Jian Yang,Ling Shuai,Yang Hou,Ming Qiu,Xinyong Li,Michael K. H. Leung

DOI: https://doi.org/10.1002/celc.201901381

IF: 4

2019-01-01

ChemElectroChem

Abstract:We report an efficient electrocatalyst utilizing non-noble metals consisting of Cu and Sn supported on nitrogen-doped graphene (NG) for reduction of CO2 over a wide potential range. The CuSn alloy nanoparticles (NPs) on NG were prepared through a hydrothermal method followed by pyrolysis under nitrogen atmosphere to achieve a uniform dispersion of the alloy NPs. The CuSn NP (Cu/Sn ratio of 0.175) decorated NG catalyst performed electrocatalytic reduction of CO2 into C1 products at a Faradaic efficiency (FE) of nearly 93 % at an overpotential of -1.0 V vs. RHE, considerably higher than that of the Cu and Sn counterparts, i. e., 32 % and 58 %, respectively. The enhanced catalytic activity could be attributed to the collaboration between the CuSn alloy and Sn metal. The first-principles density functional theory (DFT) simulation results indicate that the CuSn bimetal alloy nanoparticles enable more H atoms to participate in the electrocatalytic reduction of CO2 and exhibit an improved CO2 capture performance. In addition, the CuSn alloy having a lower barrier than that of Sn metal can accelerate the CO2 reduction process. This study presents the strategy that utilizes low-cost non-noble metals as highly efficient electrocatalysts for aqueous reduction of CO2.
Synergistic effect of Cu and Fe small nanoparticles supported on porous N-doped graphitic framework for selective electrochemical CO2 reduction at low overpotential

Xiangze Du,Lu Peng,Jiajun Hu,Yong Peng,Ana Primo,Dan Li,Josep Albero,Changwei Hu,Hermenegildo Garcia

DOI: https://doi.org/10.1039/d2nr02523j

IF: 6.7

2022-07-28

Nanoscale

Abstract:Electrochemical CO2 reduction is an appealing approach to diminish CO2 emissions, while obtaining valuable chemicals and fuels from renewable electricity. However, efficient electrocatalysts exhibiting high selectivity and low operating potentials are still needed. Herein it is reported that Cu and Fe nanoparticles supported on porous N-doped graphitic carbon matrix are efficient and selective electrocatalysts for CO2 reduction to CO at low overpotentials. XRD and Raman spectroscopy confirmed independent Cu and Fe metals as the main phases. HRSEM and HRTEM images show the coral-like morphology of the porous N-doped graphitic carbon matrix supporting Cu and Fe metal nanoparticles (about 10 wt. %) homogeneously distributed with an average size of 1.5 nm and narrow size distribution. At the optimum Fe/Cu ratio of 2, this material present high activity for CO2 reduction to CO at -0.3 V vs RHE with a Faradaic efficiency of 96 %. Moreover, at -0.5 V vs RHE this electrocatalyst produces 27.8 mmol of CO x gcat-1 x h-1, the production rate being stable for 17 h. A synergy between Cu and Fe nanoparticles due to their close proximity in comparison with independent Cu or Fe electrocatalysts was observed.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Engineering Bimetallic Copper‐Tin Based Core‐Shell Alloy@Oxide Nanowire As Efficient Catalyst for Electrochemical CO2 Reduction

Yifan Wu,Xiaoyang Deng,Hefeng Yuan,Xiaowei Yang,Jianxing Wang,Xiaoguang Wang

DOI: https://doi.org/10.1002/celc.202100623

IF: 4

2021-01-01

ChemElectroChem

Abstract:Pursuing both high effective and selective electrocatalysts is significant for efficient and low-cost electrochemical carbon dioxide (CO2) reduction. Here, we design a novel bimetallic alloy/oxide nanowire catalyst with core-shell configuration. A typical CuSn alloy core provides high electrical conductivity while the amorphous Cu doped SnO2 shell guarantees the catalytic activity and selectivity for CO2 reduction process. Computational studies further elucidate the important role of Cu doped SnO2 layer in the electrocatalytic selectivity for formate and the restraint of hydrogen production. Benefited from the well-designed components and hierarchical configuration, the as-prepared electrocatalyst displays a partial current density of 30 mA cm(-2) with a Faradaic efficiency of 78 % at -0.9 V vs. reversible hydrogen electrode (RHE) for formate. This work provides a new pathway to design advanced electrocatalyst for CO2 electrochemical reduction.
First-Principles Insight into Electrocatalytic Reduction of CO2 to CH4 on a Copper Nanoparticle

Huilong Dong,Youyong Li,De-en Jiang

DOI: https://doi.org/10.1021/acs.jpcc.8b01928

IF: 4.177

2018-01-01

The Journal of Physical Chemistry

Abstract:Copper has been extensively studied for electrocatalytic CO, reduction reaction (CO2RR) due to its unique capability to produce hydrocarbons at high overpotentials. Although CO2RR on crystallographic Cu surfaces such as Cu (211) and Cu(111) has been investigated by many, the detailed mechanistic understanding of CO2RR on small Cu nanoparticles (NP) is still lacking. In this work, we use Cu-79 as a representative NP and compare it with Cu(211) and Cu(111) for reduction of CO, to CH4 by first-principles calculations. The computed free energy profiles show that the Cu-79 NP exhibits less negative onset potential for the formation of CO than both Cu(211) and Cu(111) but more negative onset potential for the formation of CH4 than Cu(211). These onset potential trends for CO and CH4 formations on Cu-79 NP, Cu(211), and Cu(111) are correlated with adsorption energetics of the key reaction intermediates including COOH, CO, and CHO. The insight may help improve the performance of Cu NPs for CO2RR to CH4.
Steering C–C Coupling by Hollow Cu2O@C/N Nanoreactors for Highly Efficient Electroreduction of CO2 to C2+ Products

Xiangfu Meng,Hao Huang,Xiaoxiao Zhang,Lin Hu,Haibin Tang,Miaomiao Han,Fangcai Zheng,Hui Wang

DOI: https://doi.org/10.1002/adfm.202312719

IF: 19

2024-02-16

Advanced Functional Materials

Abstract:The manuscript designs a hollow cuprous oxide protected by a thin N‐doped carbon shell (H–Cu2O@C/N) as an efficient nanoreactor to stabilize the Cu+ species and enhance the coverage concentration of *CO on the local catalyst surface under the spatial confinement effect, which efficiently accelerates C–C coupling to generate C2+ products. Electrochemical CO2 reduction reaction offers a promising pathway to transform renewable electricity into value‐added fuels and feedstocks in the form of chemical energy. However, the *CO intermediates tend to obtain protons or electrons to generate C1 products. The Cu+, an active catalytic site for C2+ products, is easily reduced to Cu0 at cathodic potentials. Herein, a hollow cuprous oxide protected by a thin N‐doped carbon shell (H–Cu2O@C/N) as an efficient nanoreactor to stabilize the Cu+ species and enhance the coverage concentration of *CO on the local catalyst surface under the spatial confinement effect is designed, which efficiently accelerates C–C coupling to generate C2+ products. As a result, H–Cu2O@C/N exhibits an outstanding C2+ Faradaic efficiency of 75.9% with a partial current density of 248.8 mA cm−2 in the membrane electrode assembly (MEA) electrolyzer. Density functional theory combined with operando characterizations confirm that the N‐doped carbon layer protects the Cu+ active species from electrochemical reduction, and the high coverage density of *CO from spatial confinement effect lowers the reaction barrier of *CH2CHO, thereby promoting C–C coupling. This work offers invaluable insights into the spatial confinement effect for boosting the steering C–C coupling in Cu‐based catalysts for efficient electroreduction of CO2 to C2+ products.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Dynamic determination of Cu+ roles for CO2 reduction on electrochemically stable Cu2O-based nanocubes

Jinze Liu,Ling Cheng,Yating Wang,Rongzhen Chen,Chuqian Xiao,Xiaodong Zhou,Yihua Zhu,Yuhang Li,Chunzhong Li

DOI: https://doi.org/10.1039/d1ta10831j

IF: 11.9

2022-01-01

Journal of Materials Chemistry A

Abstract:Copper (Cu), as the most important and efficient catalyst, has been widely studied for electrochemically reducing carbon dioxide (CO2) into multi-carbon (C2+) products. However, the roles of Cu+ species in CO2 reduction are debatable due to the instabilities of all the reported Cu oxides under negative potentials. Here, for the first time, we fabricated an electrochemically stable Cu2O catalyst. In situ Raman spectroscopy determines that, with the protection of ligands, the Cu+ species are resistant to the negative potentials and remain unchanged during CO2 reduction. We find that stable Cu2O shows a high C-2 Faraday efficiency (FE) of 73%, 1.5x higher than that of common Cu2O, which reduces to metallic Cu during the CO2 reduction, suggesting that the Cu+ species promote C-C coupling. Further, we coat the ligand-stabilized Cu2O nanocubes with AgOx clusters, which achieves an increase in ethylene FE from 35% to 50% under a current density of 150 mA cm(-2).
Tuning Sn-Catalysis for Electrochemical Reduction of CO2 to CO via the Core/Shell Cu/SnO2 Structure

Qing Li,Jiaju Fu,Wenlei Zhu,Zhengzheng Chen,Bo Shen,Liheng Wu,Zheng Xi,T. Wang,Gang Lu,Jun-Jie Zhu,Shouheng Sun

DOI: https://doi.org/10.1021/jacs.7b00261

IF: 15

2017-01-01

Journal of the American Chemical Society

Abstract:Tin (Sn) is known to be a good catalyst for electrochemical reduction of CO2 to formate in 0.5 M KHCO3. But when a thin layer of SnO2 is coated over Cu nanoparticles, the reduction becomes Sn-thickness dependent: the thicker (1.8 nm) shell shows Sn-like activity to generate formate whereas the thinner (0.8 nm) shell is selective to the formation of CO with the conversion Faradaic efficiency (FE) reaching 93% at 0.7 V (vs reversible hydrogen electrode (RHE)). Theoretical calculations suggest that the 0.8 nm SnO2 shell likely alloys with trace of Cu, causing the SnO2 lattice to be uniaxially compressed and favors the production of CO over formate. The report demonstrates a new strategy to tune NP catalyst selectivity for the electrochemical reduction of CO2 via the tunable core/shell structure.
Nanostructured cobalt/copper catalysts for efficient electrochemical carbon dioxide reduction

Sharon Abner,Aicheng Chen

DOI: https://doi.org/10.1039/d4nr00909f

IF: 6.7

2024-06-20

Nanoscale

Abstract:The search for an efficient and stable catalyst for the electrochemical reduction of CO 2 to value-added chemicals is especially critical for lowering the atmospheric CO 2 concentration. In this study, self-supported cobalt/copper nanostructured catalysts were designed, where the influences of the elemental composition and acid-etching on their efficiency towards the CO 2 reduction reaction were studied. The developed Co/Cu catalysts showed superb catalytic activity with a low onset potential at −0.2 V vs. RHE. Gas and liquid product analysis revealed that formate and CO were the main products. It was observed that lower reductive potentials were favourable for formate production, while higher reductive potentials were more favourable for CO formation. In situ electrochemical FTIR studies were further conducted to gain insight into the CO 2 reduction mechanism. The novel synthetic procedure reported in this study leads to promising electrocatalysts with high efficiencies for the conversion of CO 2 into valuable products.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry

Computational screening of M/Cu core/shell nanoparticles and their applications for the electro-chemical reduction of CO<sub>2</sub> and CO

Computational Screening Of M/Cu Core/Shell Nanoparticles And Their Applications For The Electro-Chemical Reduction Of Co2 And Co

Manipulating Cu Nanoparticle Surface Oxidation States Tunes Catalytic Selectivity Toward CH4 or C2+ Products in CO2 Electroreduction

Core–shell nanoporous AuCu<sub>3</sub>@Au monolithic electrode for efficient electrochemical CO<sub>2</sub> reduction

Computational screening of effective g-C 3 N 4 based single atom electrocatalysts for the selective conversion of CO 2

Computational Screening of Core@shell Nanoparticles for the Hydrogen Evolution and Oxygen Reduction Reactions.

Copper nanoparticle interspersed MoS<sub>2</sub> nanoflowers with enhanced efficiency for CO<sub>2</sub> electrochemical reduction to fuel

Synergized Cu/Pb Core/Shell Electrocatalyst for High-Efficiency CO 2 Reduction to C 2+ Liquids

Nanostructured Copper-Based Electrocatalysts for CO2 Reduction

Engineering Bimetallic Copper‐Tin Based Core‐Shell Alloy@Oxide Nanowire as Efficient Catalyst for Electrochemical CO 2 Reduction

Nanostructured Copper‐Based Electrocatalysts for CO2 Reduction

Screening binary alloys for electrochemical CO<sub>2</sub> reduction towards multi-carbon products

Highly selective and active Cu-In2O3/C nanocomposite for electrocatalytic reduction of CO2 to CO

CuSn Alloy Nanoparticles on Nitrogen‐Doped Graphene for Electrocatalytic CO2 Reduction

Synergistic effect of Cu and Fe small nanoparticles supported on porous N-doped graphitic framework for selective electrochemical CO2 reduction at low overpotential

Engineering Bimetallic Copper‐Tin Based Core‐Shell Alloy@Oxide Nanowire As Efficient Catalyst for Electrochemical CO2 Reduction

First-Principles Insight into Electrocatalytic Reduction of CO2 to CH4 on a Copper Nanoparticle

Steering C–C Coupling by Hollow Cu2O@C/N Nanoreactors for Highly Efficient Electroreduction of CO2 to C2+ Products

Dynamic determination of Cu<SUP>+</SUP> roles for CO<sub>2</sub> reduction on electrochemically stable Cu<sub>2</sub>O-based nanocubes

Tuning Sn-Catalysis for Electrochemical Reduction of CO2 to CO via the Core/Shell Cu/SnO2 Structure

Nanostructured cobalt/copper catalysts for efficient electrochemical carbon dioxide reduction