Abstract:Recycling carbon dioxide into carbon monoxide as a feedstock for industry and transportation has become of great interest as a means to reduce the impact of humanity on the environment. Due to the high thermodynamic efficiency inherent in electrochemical reduction of CO2 at high temperatures (~800 oC), solid oxide electrolysis (SOE) is an attractive method for CO production. Furthermore, in steam and CO2 co-electrolysis, the hydrogen and CO products constitute syngas, of significant importance to industry. Additionally, SOE of CO2 is actively being explored by the National Aeronautics and Space Administration (NASA) to generate O2 for future missions to Mars. Mitigating degradation of SOE cell performance over time remains a key challenge of the technology. For example, carbon accumulation from CO disproportionation reaction (coking) on the cathode during reduction of CO2, particularly problematic in dry conditions, leads to mechanical and electrochemical degradation of the cell. Other degradation modes, well known in the solid oxide fuel cell community, such as large electrode volume changes during redox with subsequent mechanical failure are also of concern. As a result, electrodes have been developed to counter these degradation modes in electrolysis and fuel cell operation. The majority of studies have largely been guided by empirical evidence indicating coke tolerant electrodes. In this presentation, we describe an investigation into the relationship between gas/solid interface compositional and operational factors that lead to the onset of coking. In situ ambient pressure X-ray photoelectron spectroscopy (AP-XPS) was used to evaluate conditions leading to coking using CO/CO2 mixtures at 300 mTorr total pressure at 450 oC. Electrical bias was applied to ceria based films, deposited using pulsed laser deposition on “buried” Pt electrodes, supported on ionic conducting substrates of yttria stabilized zirconia (YSZ) to in situ drive the CO2 reduction reaction. With electrochemical APXPS, we tracked the evolution of surface chemical change during coking reaction on ceria thin film samples with different dopant types (Zr, Gd) and doping concentrations. The surface spectroscopy analysis yielded information about the relationship between onset of coking, surface defect concentration (e.g., oxygen vacancies), surface composition (e.g., relative cation and impurity), and area specific resistance. During CO disproportionation, or coking, surface Ce3+ concentration was only loosely correlated with the deposited carbon intensity and indicated a threshold amount of Ce3+ for coking onset. The observed threshold phenomenon deepens previous understanding of Ce3+ sites’ catalytic role in CO disproportionation since no carbon was observed even considerable surface cerium had been reduced. By combining Monte Carlo simulation, we have shown that the Ce3+−Ce3+ pair formation exhibited similar behavior against surface Ce3+ concentration as coking intensity, indicating that Ce3−Ce3+ pair could be the dominant catalytic structure for coking reaction on ceria surface. These new insights on coking mechanism would be beneficial for rational coking-resistant electrodes design for CO2 electrolysis devices.

Threshold catalytic onset of carbon formation on CeO<sub>2</sub> during CO<sub>2</sub> electrolysis: mechanism and inhibition

Threshold Catalytic Onset of Carbon Formation on CeO2 during CO2 Electrolysis: Mechanism and Inhibition

Correlating the Onset of CO Disproportionation to Surface Chemistry on Ceria

Enhanced high-temperature CO 2 electrolysis on CeO 2 by inducing under-coordinated dual-atom active sites

Enhanced electrocatalytic reduction of CO<sub>2</sub> to formate <i>via</i> doping Ce in Bi<sub>2</sub>O<sub>3</sub> nanosheets

Selective high-temperature CO2 electrolysis enabled by oxidized carbon intermediates

Morphologies and Electronic Structures of Calcium-Doped Ceria Model Catalysts and Their Interaction with CO2

Enhancement in CO2 Electroreduction upon Pr Infiltration of Ceria Electrodes

Efficient CO Oxidation using Co3O4−CeO2 Nanoparticles Supported on Resin–Based Spherical Activated Carbon with Controllable Oxygen Species

Exploring the Mechanism of the Electrochemical Polymerization of CO2 to Hard Carbon over CeO2(110)

Investigation into the photothermal catalytic CO 2 decomposition over CeO 2 with different morphologies: Behaviors of oxygen vacancies

The Enhancement Of The Catalytic Oxidation Of Co On Ir/Ceo2 Nanojunctions

Electronic Structure Modulation of Unconventional Phase Metal Nanomaterials for Highly Selective Carbon Dioxide Electroreduction

Reverse Water–gas Shift Reaction over Co-Precipitated Co–CeO2 Catalysts: Effect of Co Content on Selectivity and Carbon Formation

Crystal-Plane Effects of CeO 2 {110} and CeO 2 {100} on Photocatalytic CO 2 Reduction: Synergistic Interactions of Oxygen Defects and Hydroxyl Groups

Design Aspects of Doped CeO2 for Low-Temperature Catalytic CO Oxidation: Transient Kinetics and DFT Approach

In Situ FT-IR Study on CO Oxidation over Co3O4/CeO2 Catalyst

Exploring the Mechanism of the Electrochemical Polymerization of CO2 to hard carbon over CeO2 (110)

Carbon dioxide adsorption and activation on Ceria (110): A density functional theory study

CeO 2 Functionalized Cobalt Layered Double Hydroxide for Efficient Catalytic Oxygen‐Evolving Reaction

Carbon-CeO2 Interface Confinement Enhances the Chemical Stability of Pt Nanocatalyst for Catalytic Oxidation Reactions