Abstract:Doped ceria-based metal oxides are widely used as supports and stand-alone catalysts in reactions where CO2 is involved. Thus, it is important to understand how to tailor their CO2 adsorption behavior. In this work, steering the CO2 activation behavior of Ce-La-Cu-O ternary oxide surfaces through the combined effect of chemical and mechanical strain was thoroughly examined using both experimental and ab initio modeling approaches. Doping with aliovalent metal cations (La3+ or La3+/Cu2+) and post-synthetic ball milling were considered as the origin of the chemical and mechanical strain of CeO2, respectively. Experimentally, microwave-assisted reflux-prepared Ce-La-Cu-O ternary oxides were imposed into mechanical forces to tune the structure, redox ability, defects, and CO2 surface adsorption properties; the latter were used as key descriptors. The purpose was to decouple the combined effect of the chemical strain (εC) and mechanical strain (εM) on the modification of the Ce-La-Cu-O surface reactivity toward CO2 activation. During the ab initio calculations, the stability (energy of formation, EOvf) of different configurations of oxygen vacant sites (Ov) was assessed under biaxial tensile strain (ε > 0) and compressive strain (ε < 0), whereas the CO2-philicity of the surface was assessed at different levels of the imposed mechanical strain. The EOvf values were found to decrease with increasing tensile strain. The Ce-La-Cu-O(111) surface exhibited the lowest EOvf values for the single subsurface sites, implying that Ov may occur spontaneously upon Cu addition. The mobility of the surface and bulk oxygen anions in the lattice contributing to the Ov population was measured using 16O/18O transient isothermal isotopic exchange experiments; the maximum in the dynamic rate of 16O18O formation, Rmax(16O18O), was 13.1 and 8.5 μmol g-1 s-1 for pristine (chemically strained) and dry ball-milled (chemically and mechanically strained) oxides, respectively. The CO2 activation pathway (redox vs associative) was experimentally probed using in situ diffuse reflectance infrared Fourier transform spectroscopy. It was demonstrated that the mechanical strain increased up to 6 times the CO2 adsorption sites, though reducing their thermal stability. This result supports the mechanical actuation of the "carbonate"-bound species; the latter was in agreement with the density functional theory (DFT)-calculated C-O bond lengths and O-C-O angles. Ab initio studies shed light on the CO2 adsorption energy (Eads), suggesting a covalent bonding which is enhanced in the presence of doping and under tensile strain. Bader charge analysis probed the adsorbate/surface charge distribution and illustrated that CO2 interacts with the dual sites (acidic and basic ones) on the surface, leading to the formation of bidentate carbonate species. Density of states (DOS) studies revealed a significant Eg drop in the presence of double Ov and compressive strain, a finding with design implications in covalent type of interactions. To bridge this study with industrially important catalytic applications, Ni-supported catalysts were prepared using pristine and ball-milled oxides and evaluated for the dry reforming of methane reaction. Ball milling was found to induce modification of the metal-support interface and Ni catalyst reducibility, thus leading to an increase in the CH4 and CO2 conversions. This study opens new possibilities to manipulate the CO2 activation for a portfolio of heterogeneous reactions.

Exploring the Mechanism of the Electrochemical Polymerization of CO2 to Hard Carbon over CeO2(110)

Exploring the Mechanism of the Electrochemical Polymerization of CO2 to hard carbon over CeO2 (110)

Pinwheel-Shaped Tetranuclear Organoboron Catalysts for Perfectly Alternating Copolymerization of CO2 and Epichlorohydrin.

Efficiently Electroreducing CO2 to Ethylene on Heterostructured CeO2/CuO

Morphologies and Electronic Structures of Calcium-Doped Ceria Model Catalysts and Their Interaction with CO2

Carbon dioxide adsorption and activation on Ceria (110): A density functional theory study

Threshold Catalytic Onset of Carbon Formation on CeO2 during CO2 Electrolysis: Mechanism and Inhibition

Preparation and characterization of hollow CeO2 nanoparticles for the efficient conversion of CO2 into dimethyl carbonate

Correlating the Onset of CO Disproportionation to Surface Chemistry on Ceria

Progress in Reaction Mechanisms and Catalyst Development of Ceria-Based Catalysts for Low-Temperature CO2 Methanation

Dimethyl Carbonate Synthesis from CO2 over CeO2 with Electron‐enriched Lattice Oxygen Specises

Surface Alkali-Modified Nano-CeO2 for Atmospherically Catalytic Polycondensation of CO2 and Diol

Decoupling the Chemical and Mechanical Strain Effect on Steering the CO2 Activation over CeO2-Based Oxides: An Experimental and DFT Approach

Atom‐Economical Synthesis of Dimethyl Carbonate from CO2: Engineering Reactive Frustrated Lewis Pairs on Ceria with Vacancy Clusters

Integrated Dft and Experimental Study on Co3o4/Ceo2 Catalyst for Direct Synthesis of Dimethyl Carbonate from Co2

Enhanced high-temperature CO 2 electrolysis on CeO 2 by inducing under-coordinated dual-atom active sites

Application of Ceria in CO2 Conversion Catalysis

From CO2 to solid carbon: reaction mechanism, active species, and conditioning the Ce-alloyed GaInSn catalyst

Investigation into the photothermal catalytic CO 2 decomposition over CeO 2 with different morphologies: Behaviors of oxygen vacancies

Engineering the Charge Density on an In2.77S4/Porous Organic Polymer Hybrid Photocatalyst for CO2-to-Ethylene Conversion Reaction

Elucidating the Role of Surface Ce4+ and Oxygen Vacancies of CeO2 in the Direct Synthesis of Dimethyl Carbonate from CO2 and Methanol