Optical Scanning Fourier Ptychographic Microscopy

Lin Wang,Qihao Song,Hongbo Zhang,Yu Xin,Ting-Chung Poon

DOI: https://doi.org/10.1364/dh.2019.w3a.10

2019-01-01

Abstract:We propose optical scanning Fourier ptychographic microscopy (OSFPM). The proposed system can more precisely control the overlap of the incident light illumination as compared to conventional FPM systems.

What problem does this paper attempt to address?

Effect of spatial spectrum overlap on fourier ptychographic microscopy

Qiulan Liu,Cuifang Kuang,Yue Fang,Peng Xiu,Yicheng Li,Ruixin Wen,Xu Liu

DOI: https://doi.org/10.1142/S1793545816410042

IF: 2.396

2017-01-01

Journal of Innovative Optical Health Sciences

Abstract:Fourier ptychographic microscopy (FPM) is a newly developed imaging technique which stands out by virtue of its high-resolution and wide FOV. It improves a microscope's imaging performance beyond the diffraction limit of the employed optical components by illuminating the sample with oblique waves of different incident angles, similar to the concept of synthetic aperture. We propose to use an objective lens with high-NA to generate oblique illuminating waves in FPM. We demonstrate utilizing an objective lens with higher NA to illuminate the sample leads to better resolution by simulations, in which a resolution of 0.28 mu m is achieved by using a high-NA illuminating objective lens (NA = 1.49) and a low-NA collecting objective lens (NA = 0.2) in coherent imaging (lambda = 488 nm). We then deeply study FPM's exact relevance of convergence speed to spatial spectrum overlap in frequency domain. The simulation results show that an overlap of about 60% is the optimal choice to acquire a high-quality recovery (520*520 pixels) with about 2 min ' s computing time. In addition, we testify the robustness of the algorithm of FPM to additive noises and its suitability for phase objects, which further proves FPM's potential application in biomedical imaging.
Optical Scanning Fourier Ptychographic Microscopy.

Lin Wang,Qihao Song,Hongbo Zhang,Caojin Yuan,Ting-Chung Poon

DOI: https://doi.org/10.1364/ao.402644

IF: 1.9

2020-01-01

Applied Optics

Abstract:We propose a lower-cost and practical active scanning optical scanning Fourier ptychographic microscopy (OSFPM). Featured is a simple setup of Galvo mirrors capable of scanning large-sized objects. The active scanning laser beam is projected onto the sample in a circular pattern to form multiple lower-resolution images. With multiple lower-resolution images, a higher-resolution image is subsequently reconstructed. The OSFPM is able to more precisely control the overlap of the incident light illumination as compared to that in conventional LED-based or other laser-based scanning FPM systems. The proposed microscope is also suitable for applications where a larger size of the object needs to be imaged with efficient illumination.
Wavefront Modulation with Spatial Light Modulator for Fourier Ptychographic Microscopy

Jinlei Zhang,Xiao Tao,Qin Xie,Yan Sun,Zhenrong Zheng

DOI: https://doi.org/10.1117/12.2601379

2021-01-01

Abstract:Fourier ptychographic microscopy (FPM) is a recently developed computational imaging technology, which can bypass the limitation of optical-spatial-bandwidth product to achieve imaging with both high resolution and wide field-of-view. Original FPM setup is limited to image thin samples with angle-varied illuminations. A diffuser scanning FPM method, which scans a diffuser with unknown profile between the object and objective lens to modulate the complex exit wavefront of the object, is implemented to address this 3D refocusing problem. However, since the profile of the diffuser is unknown, the number of images required for method to converge is large. A mechanical translation stage is also required, which may introduce the systematic error of the position. In this paper, we propose a new FPM method with wavefront modulation imposed by spatial light modulator (SLM). The SLM is placed between the object and the objective lens to produce specific pattern profile, which is used to modulate the complex exit wavefront of the object. Fourier ptychographic phase retrieval process is employed to recovery the complex exit wavefront of the object. With the use of SLM, it is unnecessary to employ 2D motorized translation stage to move the imposed pattern profile so that the error of translation stage is eliminated. Moreover, since the imposed pattern profile is known, the number of images required for the algorithm to converge is reduced. Simulation and experiment are performed to validate the effectiveness of our proposed method. Compared with the method, which utilizes unknown diffuser, our method can achieve a more accurate reconstruction result with a faster data acquisition and higher convergence speed.
Surface wave illumination Fourier ptychographic microscopy.

Qiulan Liu,Yue Fang,Renjie Zhou,Peng Xiu,Cuifang Kuang,Xu Liu

DOI: https://doi.org/10.1364/OL.41.005373

IF: 3.6

2016-01-01

Optics Letters

Abstract:We propose a novel microscopy method, combining surface wave illumination and the Fourier ptychographic microscopy (FPM) algorithm to achieve super-resolution (SR) imaging. In our system, an oil-immersion objective lens is used to excite both the total internal reflection (TIR) evanescent waves and the surface plasmon waves (SPWs), which illuminate the sample with large wave vectors. Through the FPM algorithm, a resolution approximately twice that of conventional wide-field microscopy is obtained. Meanwhile, we could retrieve the sample's quantitative phase map in order to obtain its surface profile. Importantly, the field enhancement from a SPW has improved the contrast of the reconstructed images, which is critical for revealing the finer structural details of the specimen. In our experiments, we have imaged metallic gratings with a 120 or 150 nm wide line and trench features. We accurately retrieved their axial dimensions with a lateral resolution better than 240 nm that is close to the theoretical resolution of 215 nm, thus demonstrating the quantitative phase imaging capability of our technique. As this approach provides a label-free solution for intensity and phase imaging of samples with lateral resolution exceeding the limit introduced by the optical system, it can be potentially used in a wide range of noninvasive biological imaging applications. (C) 2016 Optical Society of America.
Digital micromirror device-based laser-illumination Fourier ptychographic microscopy.

Cuifang Kuang,yousi ma,renping zhou,Justin Lee,George Barbastathis,Ramachandra R Dasari,Zahid Yaqoob,Peter T C So

DOI: https://doi.org/10.1364/OE.23.026999

IF: 3.8

2015-01-01

Optics Express

Abstract:We report a novel approach to Fourier ptychographic microscopy (FPM) by using a digital micromirror device (DMD) and a coherent laser source (532 nm) for generating spatially modulated sample illumination. Previously demonstrated FPM systems are all based on partially-coherent illumination, which offers limited throughput due to insufficient brightness. Our FPM employs a high power coherent laser source to enable shot-noise limited high-speed imaging. For the first time, a digital micromirror device (DMD), imaged onto the back focal plane of the illumination objective, is used to generate spatially modulated sample illumination field for ptychography. By coding the on/off states of the micromirrors, the illumination plane wave angle can be varied at speeds more than 4 kHz. A set of intensity images, resulting from different oblique illuminations, are used to numerically reconstruct one high-resolution image without obvious laser speckle. Experiments were conducted using a USAF resolution target and a fiber sample, demonstrating high-resolution imaging capability of our system. We envision that our approach, if combined with a coded-aperture compressive-sensing algorithm, will further improve the imaging speed in DMD-based FPM systems. (C) 2015 Optical Society of America
Structured Illumination Fluorescence Fourier Ptychographic Microscopy

Peng Xiu,Youhua Chen,Cuifang Kuang,Yue Fang,Yifan Wang,Jiannan Fan,Yingke Xu,Xu Liu

DOI: https://doi.org/10.1016/j.optcom.2016.06.075

IF: 2.4

2016-01-01

Optics Communications

Abstract:We apply a Fourier ptychographic algorithm for fluorescent samples using structured illumination. The samples are illuminated with structured light patterns and the raw imaging data using traditional structured illumination fluorescence microscopy (SIM) are acquired. We then extract equivalent oblique illuminated images of fluorescent samples from the SIM images. An optimized Fourier ptychography algorithm is proposed, which ensures the fidelity of the reconstructed the super-resolution results. This method can break the diffraction limit to a resolution of λ/4, and has a better signal-to-noise ratio (SNR) than SIM, especially when the background noise is high.
Modulated Pattern Scanning Microscopy

Yuxuan Qiu,Yuran Huang,Xin Liu,Yusen Zhang,Xiang Hao,Cuifang Kuang,Xu Liu

DOI: https://doi.org/10.1364/ol.451958

2022-01-01

Abstract:In confocal microscopy, the effective optical transfer function (OTFeff) with Gaussian plane wave illumination covers very few high-frequency components, which prohibits further improvement of the resolution. We propose modulated pattern scanning microscopy (MPSM) to achieve super-resolution imaging. In MPSM, the phase of the illumination beam is modulated to reassign the OTFeff in the Fourier domain. The phase mask is designed using an optimization algorithm to obtain the fluorescence emission pattern with rich high-frequency components. Then, the postprocessing algorithms are adapted to retrieve the super-resolved images from the modulated recordings. Simulation and experiment demonstrate that MPSM increases the resolution approximately 1.3 times better than confocal microscopy. Compared with conventional deconvolution, MPSM exhibits a higher signal-to-noise ratio.
Tunable-illumination for Laser Fourier Ptychographic Microscopy Based on a Background Noise-Reducing System

Xiao Tao,Jinlei Zhang,Chenning Tao,Peng Sun,Rengmao Wu,Zhenrong Zheng

DOI: https://doi.org/10.1016/j.optcom.2020.125764

IF: 2.4

2020-01-01

Optics Communications

Abstract:It is inherently difficult for a conventional microscopic imaging system to produce images with both wide field of view (FOV) and high-resolution because of its limited space bandwidth product. Fourier ptychographic microscopy (FPM) has been developed to overcome this limitation by using angle-varied illumination to enhance the performance of the system. In this paper, we propose a FPM imaging approach that employs a laser source with a newly developed illumination control optical system. The proposed system consists of a digital micromirror device and a zoom system with a condenser lens to provide sample illumination with angle-varied pattern directions and controllable pattern sizes. In addition, a total internal reflection prism is employed in the system to remove unexpected background noise and extend the FOV for reconstruction. The proposed system is validated against a USAF resolution target and a biological sample, and as a result reconstructs images with higher resolution and more details once the positional misalignment correction algorithm is employed. We envision that the proposed FPM system will be suitable for high-speed imaging applications.
Phase-coded Speckle Illumination for Laser Fourier Ptychographic Microscopy

Xiao Tao,Jinlei Zhang,Peng Sun,Chang Wang,Chenning Tao,Rengmao Wu,Zhenrong Zheng

DOI: https://doi.org/10.1016/j.optcom.2021.127199

IF: 2.4

2021-01-01

Optics Communications

Abstract:It remains a tough task for designing a microscopy system to approach the diffraction limit over a wide field of view due to its restricted space bandwidth product (SBP). Fourier ptychographic microscopy (FPM) has been developed to broaden the SBP of a conventional microscope platform without major hardware modifications. In this paper, we propose a novel FPM system based on the phase-coded speckle illumination, termed PSI-FPM, which employs a laser source with a speckle illumination control optical system. A phase-only spatial light modulator (SLM) with a condenser lens is utilized in the PSI-FPM system to project the phase-coded speckle illumination patterns onto the sample. The convolution between the sample spectrum and the illumination spectrum in the Fourier domain extend the numerical aperture of the objective that acts as a low-pass filter with cut-off frequency. The SLM is introduced in the PSI-FPM system to produce the specific illumination patterns so that the number of the captured images used for reconstruction are greatly reduced. In addition, the generated pattern is scanned to different directions without mechanical movement, which improves the robustness of the system. The PSI-FPM system is validated against simulations and experiments, and as a result reconstructs high-resolution images once the phase retrieval algorithm is employed. We envision that the PSI-FPM system will be suitable for many other speckle imaging applications.
Saturated Pattern-Illuminated Fourier Ptychography Microscopy

Yue Fang,Youhua Chen,Cuifang Kuang,Peng Xiu,Qiulan Liu,Baoliang Ge,Xu Liu

DOI: https://doi.org/10.1088/2040-8986/19/1/015602

IF: 2.1

2016-01-01

Journal of Optics

Abstract:We report a series of simulation studies which extends pattern-illuminated Fourier ptychography microscopy by integrating with the nonlinearity arising from saturation of the fluorophore excited state for super-resolution fluorescence imaging. This extended technique, termed Saturated pattern-illuminated Fourier ptychography (SpiFP) microscopy, could achieve a resolution four times that of wide field when the illuminating light intensity approaches the saturation threshold in simulations. Increasing light intensity leads to further resolution enhancement. In order to demonstrate the performance of SpiFP, we make a comparison between SpiFP and saturated structure illumination microscopy in simulations, and prove that the SpiFP exhibits superior robustness to noise, aberration correcting ability, and pattern's flexibility. Introducing the saturation of the fluorescent emission brings in notable improvements in imaging performance, implying its potential in nanoscale-sized biological observations by wide-field microscopy.
High-speed Fourier Ptychographic Microscopy for Quantitative Phase Imaging.

Yi Xiao,Shiyuan Wei,Shaolong Xue,Cuifang Kuang,Anli Yang,Maoliang Wei,Hongtao Lin,Renjie Zhou

DOI: https://doi.org/10.1364/ol.428731

IF: 3.6

2021-01-01

Optics Letters

Abstract:Fourier ptychographic microscopy (FPM), as an emerging computational imaging method, has been applied to quantitative phase imaging with resolution bypassing the physical limit of the detection objective. Due to the weak illumination intensity and long image acquisition time, the achieved imaging speed in current FPM methods is still low, making them unsuitable for real-time imaging applications. We propose and demonstrate a high-speed FPM method based on using laser illumination and digital micro-mirror devices for illumination angle scanning. In this new, to the best of our knowledge, FPM method, we realized quantitative phase imaging and intensity imaging at over 42 frames per second (fps) with around 1 µm lateral resolution. The quantitative phase images have revealed membrane height fluctuations of red blood cells with nanometer-scale sensitivity, while the intensity images have resolved subcellular features in stained cancer tissue slices.
A Positional Misalignment Correction Method for Fourier Ptychographic Microscopy Based on the Quasi-Newton Method with a Global Optimization Module

Jinlei Zhang,Xiao Tao,Peng Sun,Zhenrong Zheng

DOI: https://doi.org/10.1016/j.optcom.2019.07.046

IF: 2.4

2019-01-01

Optics Communications

Abstract:Fourier ptychographic microscopy (FPM) can achieve high resolution imaging with a wide field-of-view, in which, the position of the LED sources determines the quality of the reconstructed image. In this paper, a positional misalignment correction method, which is based on the quasi-Newton method combined with a global optimization module, is proposed to recover a high quality and high-resolution image with positional error of the LED sources. In the method, the global optimization module optimizes the LED position at first, which gives the quasi-Newton method a better initial position estimate. Simulation and experiment have been performed to verify the effectiveness of the proposed method. The results show that, compared with state-of-the-art positional misalignment correction algorithms, the method achieves better reconstruction quality and makes the reconstruction process converge faster and more stable. The proposed method has also been proven to have great potential for correcting large random positional misalignment.
Fourier Ptychography for High Space-Bandwidth Product Microscopy

Liheng Bian,Jinli Suo,Qionghai Dai,Feng Chen

DOI: https://doi.org/10.1515/aot-2017-0054

2017-01-01

Advanced Optical Technologies

Abstract:Fourier ptychography is a novel imaging technique with high space-bandwidth product (SBP) on the scale of gigapixel, and has been successfully applied for high-resolution and large field-of-view (FOV) microscopy, termed Fourier ptychographic microscopy (FPM). FPM utilizes a low-numerical-aperture objective lens to capture multiple large FOV but low-resolution images under angularly varying illumination, and uses phase-retrieval algorithms to reconstruct the sample's high-resolution amplitude and phase information. FPM is advantageous over conventional high SBP microscopy techniques in many aspects, including no mechanical scanning, computational acquisition of both amplitude and phase, extended depth of focus, long working distance, and high compatibility with current microscopes. In this paper, we review FPM with its principles, multiple techniques to improve its performance, and its various applications and extensions.
Fourier Ptychographic Microscopy Using Wavelength Multiplexing

You Zhou,Jiamin Wu,Zichao Bian,Jinli Suo,Guoan Zheng,Qionghai Dai

DOI: https://doi.org/10.1117/1.jbo.22.6.066006

IF: 3.758

2017-01-01

Journal of Biomedical Optics

Abstract:Fourier ptychographic microscopy (FPM) is a recently developed technique stitching low-resolution images in Fourier domain to realize wide-field high-resolution imaging. However, the time-consuming process of image acquisition greatly narrows its applications in dynamic imaging. We report a wavelength multiplexing strategy to speed up the acquisition process of FPM several folds. A proof-of-concept system is built to verify its feasibility. Distinguished from many current multiplexing methods in Fourier domain, we explore the potential of high-speed FPM in spectral domain. Compatible with most existing FPM methods, our strategy provides an approach to high-speed gigapixel microscopy. Several experimental results are also presented to validate the strategy.
Concept, implementations and applications of Fourier ptychography

Guoan Zheng,Cheng Shen,Shaowei Jiang,Pengming Song,Changhuei Yang

DOI: https://doi.org/10.1038/s42254-021-00280-y

IF: 36.273

2021-02-10

Nature Reviews Physics

Abstract:The competition between resolution and the imaging field of view is a long-standing problem in traditional imaging systems — they can produce either an image of a small area with fine details or an image of a large area with coarse details. Fourier ptychography (FP) is an approach for tackling this intrinsic trade-off in imaging systems. It takes the challenge of high-throughput and high-resolution imaging from the domain of improving the physical limitations of optics to the domain of computation. It also enables post-measurement computational correction of optical aberrations. We present the basic concept of FP, compare it to related imaging modalities and then discuss experimental implementations, such as aperture-scanning FP, macroscopic camera-scanning FP, reflection mode, single-shot set-up, X-ray FP, speckle-scanning scheme and deep-learning-related implementations. Various applications of FP are discussed, including quantitative phase imaging in 2D and 3D, digital pathology, high-throughput cytometry, aberration metrology, long-range imaging and coherent X-ray nanoscopy. A collection of datasets and reconstruction codes is provided for readers interested in implementing FP themselves. Fourier ptychography is an imaging approach that addresses the intrinsic trade-off between resolution and field of view in optical systems and provides computational correction of optical aberrations. This Technical Review surveys its implementations and applications.

physics, applied, multidisciplinary
Fourier ptychographic microscopy with sparse representation

Yongbing Zhang,Pengming Song,Jian Zhang,Qionghai Dai

DOI: https://doi.org/10.1038/s41598-017-09090-8

IF: 4.6

2017-01-01

Scientific Reports

Abstract:Fourier ptychographic microscopy (FPM) is a novel computational microscopy technique that provides intensity images with both wide field-of-view and high-resolution. By combining ideas from synthetic aperture and phase retrieval, FPM iteratively stitches together a number of variably illuminated, low-resolution intensity images in Fourier space to reconstruct a high-resolution complex sample image. Although FPM is able to bypass the space-bandwidth product (SBP) limit of the optical system, it is vulnerable to the various capturing noises and the reconstruction is easy to trap into the local optimum. To efficiently depress the noise and improve the performance of reconstructed high-resolution image, a FPM with sparse representation is proposed in this paper. The cost function of the reconstruction is formulated as a regularized optimization problem, where the data fidelity is constructed based on a maximum likelihood theory, and the regulation term is expressed as a small number of nonzero elements over an appropriate basis for both amplitude and phase of the reconstructed image. The Nash equilibrium is employed to obtain the approximated solution. We validate the proposed method with both simulated and real experimental data. The results show that the proposed method achieves state-of-the-art performance in comparison with other approaches.
Nonlinear Optimization Approach for Fourier Ptychographic Microscopy

Yongbing Zhang,Weixin Jiang,Qionghai Dai

DOI: https://doi.org/10.1364/oe.23.033822

IF: 3.8

2015-01-01

Optics Express

Abstract:Fourier ptychographic microscopy (FPM) is recently proposed as a computational imaging method to bypass the limitation of the space-bandwidth product of the traditional optical system. It employs a sequence of low-resolution images captured under angularly varying illumination and applies the phase retrieval algorithm to iteratively reconstruct a wide-field, high-resolution image. In current FPM imaging system, system uncertainties, such as the pupil aberration of the employed optics, may significantly degrade the quality of the reconstruction. In this paper, we develop and test a nonlinear optimization algorithm to improve the robustness of the FPM imaging system by simultaneously considering the reconstruction and the system imperfections. Analytical expressions for the gradient of a squared-error metric with respect to the object and illumination allow joint optimization of the object and system parameters. The algorithm achieves superior reconstructions when the system parameters are inaccurately known or in the presence of noise and corrects the pupil aberrations simultaneously. Experiments on both synthetic and real captured data validate the effectiveness of the proposed method.
Theoretical Analysis of Diffraction Imaging in Fourier Ptychography Microscopy

Shaohui Zhang,Yao Hu,Ying Wang,Xuemin Cheng,Qun Hao

DOI: https://doi.org/10.1117/12.2519587

2019-01-01

Abstract:Fourier ptychography microscopy (FPM) is a recently developed computational imaging approach which surpasses the resolution barrier of a low numerical aperture (NA) imaging system. It is a powerful tool due to its ability to achieve super resolution of complex sample function, pupil aberration, LED misalignment, and beyond. However, recent studies have focused more on the optimization algorithms and set-ups instead of its theoretical background. Although some imaging laws about FPM have already been set forth, the formulas and laws are not fully defined, and the connection between diffraction theory and Fourier optics has a gap. Therefore, there exist a need for comprehensive research on physical and mathematical basis of FPM for future applications. Keeping this goal in mind, this manuscript utilizes scalar field diffraction theory to rigorously study the relationship between wavelength, the propagation mode, illumination direction of the incident wave, sample structure information and the direction of the output wave. The theoretical analysis of diffraction imaging in FPM provides a clear physical basis for not only the FPM systems, but also for the ptychography iterative engine (PIE) and any other coherent diffraction imaging techniques and systems. It can help to find the source of noise and therefore improve image quality in FPM technique and systems.
Robust Fourier ptychographic microscopy via a physics-based defocusing strategy for calibrating angle-varied LED illumination

Chuanjian Zheng,Shaohui Zhang,Guocheng Zhou,Yao Hu,Qun Hao

DOI: https://doi.org/10.1364/boe.452507

IF: 3.4

2022-02-22

Biomedical Optics Express

Abstract:Fourier ptychographic microscopy (FPM) is a recently developed computational imaging technique for wide-field, high-resolution microscopy with a high space-bandwidth product. It integrates the concepts of synthetic aperture and phase retrieval to surpass the resolution limit imposed by the employed objective lens. In the FPM framework, the position of each sub-spectrum needs to be accurately known to ensure the success of the phase retrieval process. Different from the conventional methods with mechanical adjustment or data-driven optimization strategies, here we report a physics-based defocusing strategy for correcting large-scale positional deviation of the LED illumination in FPM. Based on a subpixel image registration process with a defocused object, we can directly infer the illumination parameters including the lateral offsets of the light source, the in-plane rotation angle of the LED array, and the distance between the sample and the LED board. The feasibility and effectiveness of our method are validated with both simulations and experiments. We show that the reported strategy can obtain high-quality reconstructions of both the complex object and pupil function even the LED array is randomly placed under the sample with both unknown lateral offsets and rotations. As such, it enables the development of robust FPM systems by reducing the requirements on fine mechanical adjustment and data-driven correction in the construction process.

radiology, nuclear medicine & medical imaging,biochemical research methods,optics
Single full-FOV reconstruction Fourier ptychographic microscopy

Youqiang Zhu,Minglu Sun,Xiong Chen,Hao Li,Quanquan Mu,Dayu Li,Li Xuan

DOI: https://doi.org/10.1364/boe.409952

IF: 3.4

2020-11-16

Biomedical Optics Express

Abstract:Fourier ptychographic microscopy (FPM) is a recently developed computational imaging technique that has high-resolution and wide field-of-view (FOV). FPM bypasses the NA limit of the system by stitching a number of variable-illuminated measured images in Fourier space. On the basis of the wide FOV of the low NA objective, the high-resolution image with a wide FOV can be reconstructed through the phase recovery algorithm. However, the high-resolution reconstruction images are affected by the LED array point light source. The results are: (1) the intensities collected by the sample are severely declined when edge LEDs illuminate the sample; (2) the multiple reconstructions are caused by wavevectors inconsistency for the full FOV images. Here, we propose a new lighting scheme termed full FOV Fourier ptychographic microscopy (F3PM). By combining the LED array and telecentric lens, the method can provide plane waves with different angles while maintaining uniform intensity. Benefiting from the telecentric performance and f‒θ property of the telecentric lens, the system stability is improved and the relationship between the position of LED and its illumination angle is simplified. The excellent plane wave provided by the telecentric lens guarantees the same wavevector in the full FOV, and we use this wavevector to reconstruct the full FOV during one time. The area and diameter of the single reconstruction FOV reached 14.6mm 2 and 5.4 mm, respectively, and the diameter is very close to the field number (5.5 mm) of the 4× objective. Compared with the traditional FPM, we have increased the diameter of FOV in a single reconstruction by ∼ 10 times, eliminating the complicated steps of computational redundancy and image stitching.

radiology, nuclear medicine & medical imaging,biochemical research methods,optics

Optical Scanning Fourier Ptychographic Microscopy

Effect of spatial spectrum overlap on fourier ptychographic microscopy

Optical Scanning Fourier Ptychographic Microscopy.

Wavefront Modulation with Spatial Light Modulator for Fourier Ptychographic Microscopy

Surface wave illumination Fourier ptychographic microscopy.

Digital micromirror device-based laser-illumination Fourier ptychographic microscopy.

Structured Illumination Fluorescence Fourier Ptychographic Microscopy

Modulated Pattern Scanning Microscopy

Tunable-illumination for Laser Fourier Ptychographic Microscopy Based on a Background Noise-Reducing System

Phase-coded Speckle Illumination for Laser Fourier Ptychographic Microscopy

Saturated Pattern-Illuminated Fourier Ptychography Microscopy

High-speed Fourier Ptychographic Microscopy for Quantitative Phase Imaging.

A Positional Misalignment Correction Method for Fourier Ptychographic Microscopy Based on the Quasi-Newton Method with a Global Optimization Module

Fourier Ptychography for High Space-Bandwidth Product Microscopy

Fourier Ptychographic Microscopy Using Wavelength Multiplexing

Concept, implementations and applications of Fourier ptychography

Fourier ptychographic microscopy with sparse representation

Nonlinear Optimization Approach for Fourier Ptychographic Microscopy

Theoretical Analysis of Diffraction Imaging in Fourier Ptychography Microscopy

Robust Fourier ptychographic microscopy via a physics-based defocusing strategy for calibrating angle-varied LED illumination

Single full-FOV reconstruction Fourier ptychographic microscopy