Abstract:In this study, we proposed a novel composite anchorage that considers the anchoring performance and dimension simultaneously. The design concept of this composite anchorage was first introduced, followed by comparison with the traditional inner-cone bond-type anchorage and traditional composite anchorage through theoretical and experimental methods. Then, a parametric study was conducted to determine the influence of different parameters on the anchoring performance, and the optimal design parameters were recommended according to the finite element (FE) and test results. Finally, the practicability of the optimal design parameters were validated through experiments on the anchorage with multiple CFRP tendons. Results showed that the novel composite anchorage could improve the anchoring performance compared with the traditional inner-cone bond-type anchorage by promoting increased anchorage efficiency by 60.4% and, with an ideal failure mode of tendon rupture. Moreover, the novel composite anchorage had smaller dimensions and avoided the presence of a vulnerable position at the junction of the mechanical and bond parts compared with the traditional composite anchorage. In addition, a group of optimal design parameters of this composite anchorage with a pre-tightening force of 130 kN, an inclinational differential angle of 0.1°, an inclination angle of 2.9°, and an embedded length of 30 d~40 d were proposed. The composite anchorage with five CFRP tendons designed with the proposed parameters failed with the rupture of the tendons and exhibited an anchoring efficiency of 1.05. This result showed that the optimal parameters were suitable for this novel composite anchorage to grip multiple tendons. This study can provide an experimental and theoretical basis for designing large-tonnage anchorage for multiple FRP tendons used as hangers or cables in real bridges.

Static Load Tests Study of Improved Anchors for CFRP Tendon

Experimental and Numerical Study of Corrugated Anchors for CFRP Plates

Finite Element analysis and experimental study of static performance of multi‐CFRP tendon composite anchorage system

[The bronchial and pulmonary manifestations of aspergillosis other than bronchiectatic aspergilloma].

Experimental investigation and damage evaluation of a novel bond type anchorage for carbon fiber reinforced polymer tendons

Tests for anti-shear failure mechanism of CFRP-strengthened RC Beams without Stirrups under impact loading

Optimal Design of a Novel Composite Anchorage for Carbon-Fiber-Reinforced Polymer (CFRP) Tendons

Experimental study on dynamic behavior of CFRP-to-steel interface

An Efficient Method for Culturing Human Breast Epithelium: Analysis of Results

EXPERIMENTAL STUDY ON FLEXURAL BEHAVIOR OF REINFORCED CONCRETE BEAMS PRE-STRESSED WITH CFRP TENDONS

Static Experimental Study on New Arc Multi-Tendon CFRP Cable Anchorage System

Uniaxial Tensile Behavior of Anchored Carbon Fabric-Reinforced Cementitious Matrix Plates

Structural Analyses of Extruded CFRP Tendon-Anchor System and Applications in Thin-Walled Aluminum/cfrp Bridge

A novel anchor method for large tonnage CFRP cable: Anchorage design and full-scale experiment

Cover Separation of CFRP Strengthened Beam-Type Cantilevers with Steel Bolt Anchorage

Bond behavior of an ultra-high performance concrete-filled anchorage for carbon fiber-reinforced polymer tendons under static and impact loads

Effect of anchorages on C-FRCM/concrete interfacial shear performance

Mechanical analysis of new-type arc-cone anchor for CFRP strand wires

Numerical and experimental evaluation of a variable-stiffness wedge anchorage for basalt-fiber-reinforced polymer tendons

Experimental Research on Bonded Anchorage of Carbon Fiber Reinforced Polymer Prestressed Strands

Experiments and mechanical behaviour of anchorage joints for steel cables