Abstract:In this study, we conducted a facile membrane modification process by mild electroless deposition of copper nanoparticles (CuNPs) integrating polydopamine (PDA) coating to combat biofouling of thin-film composite (TFC) reverse osmosis (RO) membranes. Various experimental tests and characterization techniques have been applied to reveal the anti-biofouling performance and underlying mechanism of prepared membranes (i.e., Cu/ PDA/TFC membrane). The successful functionalization with PDA and CuNPs highly enhanced the anti-fouling properties of Cu/PDA/TFC membrane, as evidenced by 45%, 40% and 37% respectively lower adsorption of bovine serum albumin, humic acid, and lipopolysaccharide in static adhesion assays. A significant decreased membrane-foulant adhesion forces by 63% was observed for Cu/PDA/TFC membrane compared to control membrane, which is ascribed to enhanced membrane surface hydrophilicity after PDA coating. Moreover, The Cu/PDA/TFC membranes presented significantly decreased cell viability (E. coli from 90% to 22%, P. aeruginosa from 89% to 26%, and S. aureus from 84% to 18%), and reduced adenosine tri-phosphate (ATP) content after 3 h bacterial exposure (E. coli by 57%, P. aeruginosa by 50%, and S. aureus by 56%). Assessment on cell viability and metabolic activities of bacteria deposited on membrane indicate that contact-mediated toxicity contributed to the antibacterial mechanism of Cu/PDA//TFC membrane. In addition, the reduced viability of the planktonic cells at the membrane surroundings under durable copper leaching (similar to 17 mg/m(2) to similar to 9 mg/m(2)) suggest that release of antibacterial Cu2+ ions also played an important role in membrane antibacterial mechanism. Both contact-mediated and Cu2+ release-based antibacterial mechanisms endow Cu/PDA/TFC membrane with excellent anti-biofouling capacity under long-term dynamic condition, with 45% lower flux decline compared to the control membrane.

Preparation of Cu-CNT/ceramic Hollow Fiber Membranes and Investigation of Their Antibiofouling Performance under Electrochemical Assistance

Fabrication of Catalytic Ceramic Nanofiber Membrane with High Permeability and Superior Catalytic Performance

Silver Nanowire-Carbon Nanotube/coal-Based Carbon Composite Membrane with Fascinating Antimicrobial Ability and Antibiofouling under Electrochemical Assistance

Improvement Of Antifouling And Antimicrobial Abilities On Silver-Carbon Nanotube Based Membranes Under Electrochemical Assistance

Electro-assisted CNTs/ceramic flat sheet ultrafiltration membrane for enhanced antifouling and separation performance

Enhanced Permeability, Selectivity, and Antifouling Ability of CNTs/Al2O3 Membrane under Electrochemical Assistance

The preparation of electrically-enhanced and hydrophilic CNTs-PVDF composite hollow fiber membranes for fouling resistance

Enhanced Permeability, Contaminants Removal and Antifouling Ability of CNTs-based Hollow Fiber Membranes under Electrochemical Assistance

Performance improvement and application of copper-based nanomaterials in membrane technology for water treatment: A review

Dual-Function Conductive Copper Hollow Fibers for Microfiltration and Anti-biofouling in Electrochemical Membrane Bioreactors

Antibiotic Oxidation and Fouling Control of Ceramic Microfiltration Membrane Through Effective Heterogeneous Electro-Fenton Process Based on Nitrogen-Doped Carbon Nanotubes and Cu-Fe Bimetallic Oxides

Modified Multi-Walled Carbon Nanotube and Silanized MXene Electrostatic Assembly Enables Antimicrobial, Conductive Mixed Matrix Membranes for Efficient Electrochemical Cleaning

Antifouling Performance and Mechanisms in an Electrochemical Ceramic Membrane Reactor for Wastewater Treatment

Removal of Cu(II) Ions from Contaminated Waters Using a Conducting Microfiltration Membrane.

Facile Preparation of Anti-Biofouling Reverse Osmosis Membrane Embedded with Polydopamine-Nano Copper Functionality: Performance and Mechanism

Highly-efficient Cathodic Lysis of Biofilm on Conductive Carbon Nanotube Membranes

Fouling Control Mechanisms in Filtrating Natural Organic Matters by Electro-Enhanced Carbon Nanotubes Hollow Fiber Membranes

Conductive and stable polyphenylene/CNT composite membrane for electrically enhanced membrane fouling mitigation

Fabrication of antibacterial and self-cleaning CuxP@g-C3N4/PVDF-CTFE mixed matrix membranes with enhanced properties for efficient ultrafiltration

Anti-fouling Characteristic of Carbon Nanotubes Hollow Fiber Membranes by Filtering Natural Organic Pollutants

Electroless Deposition of Copper Nanoparticles Integrates Polydopamine Coating on Reverse Osmosis Membranes for Efficient Biofouling Mitigation.