Abstract:Planar perovskite solar cells (PSCs) have gained great interest due to their low-temperature solution preparation and simple process. In inverted planar PSCs, an additional buffer layer is usually needed on the top of the PCBM electron-transport layer (ETL) to enhance the device performance. In this work, we used a new buffer layer, zirconium acetate (Zr(Ac)4). The inclusion of the Zr(Ac)4 buffer layer leads to the increase of FF from ∼68% to ∼79% and PCE from ∼14% to ∼17% in the planar PSCs. The UPS measurement indicates that the Zr(Ac)4 layer has a low HOMO level of -8.2 eV, indicating that the buffer layer can act as a hole-blocking layer. Surface morphology and surface chemistry investigations reveal that the elements I, MA and Pb can diffuse across the PCBM ETL, damaging the device performance. The covering Zr(Ac)4 molecules fill in the pinholes of the PCBM layer and effectively block the ions/molecules of the perovskite from diffusion across the ETL. The resulting more robust PCBM/Zr(Ac)4 ETL leads to weaker ionic charge accumulation and lower diode leakage current. The double role of hole-and-ion blocking of the Zr(Ac)4 layer explains the improved FF and PCE in the PSCs.

Correction: Improved fill factor in inverted planar perovskite solar cells with zirconium acetate as the hole-and-ion-blocking layer

Correction: Control of aggregation and dissolution of small molecule hole transport layers via a doping strategy for highly efficient perovskite solar cells

Improved Fill Factor in Inverted Planar Perovskite Solar Cells with Zirconium Acetate As the Hole-and-ion-blocking Layer.

Correction: Triple Cation Additive NH3+C2H4NH2+C2H4NH3+-induced Phase-Stable Inorganic Α-Cspbi3 Perovskite Films for Use in Solar Cells

Correction: Forming a composite electron blocking layer to enhance the performance of carbon-based CsPbI<sub>3</sub> perovskite solar cells

20.7% highly reproducible inverted planar perovskite solar cells with enhanced fill factor and eliminated hysteresis (vol 12, pg 1622, 2019)

Correction: 17% efficient printable mesoscopic PIN metal oxide framework perovskite solar cells using cesium-containing triple cation perovskite

Correction: A Hole-Transport Material That Also Passivates Perovskite Surface Defects for Solar Cells with Improved Efficiency and Stability

Correction: Preventing lead leakage in perovskite solar cells and modules with a low-cost and stable chemisorption coating

Correction: Steering the Crystallization of Perovskites for High-Performance Solar Cells in Ambient Air

Correction: Formamidinium-based Ruddlesden–Popper Perovskite Films Fabricated Via Two-Step Sequential Deposition: Quantum Well Formation, Physical Properties and Film-Based Solar Cells

Correction: Temporal and Spatial Pinhole Constraints in Small-Molecule Hole Transport Layers for Stable and Efficient Perovskite Photovoltaics

Correction: Forming a composite electron blocking layer to enhance the performance of carbon-based CsPbI<sub>3</sub> perovskite solar cells (vol 7, pg 1617, 2023)

Correction: Interfacial engineering between SnO2/MAPbI3 by maleate pheniramine halides toward carbon counter electrode-based perovskite solar cells with 16.21% efficiency

Correction: Tailoring a Dynamic Crystalline Process During the Conversion of Lead-Halide Perovskite Layer to Achieve High Performance Solar Cells

Correction: Chlorine-doped SnO<sub>2</sub> hydrophobic surfaces for large grain perovskite solar cells

Correction: Organic–inorganic Halide Perovskite Based Solar Cells – Revolutionary Progress in Photovoltaics

Correction: Gradient Formation and Charge Carrier Dynamics of CuBiI4 Based Perovskite-Like Solar Cells

Correction: Peripheral Halogenation Engineering Controls Molecular Stacking to Enable Highly Efficient Organic Solar Cells

Correction: Highly-efficient semi-transparent organic solar cells utilising non-fullerene acceptors with optimised multilayer MoO<sub>3</sub>/Ag/MoO<sub>3</sub> electrodes

Correction: Optical and Electrical Effects of Plasmonic Nanoparticles in High-Efficiency Hybrid Solar Cells