Abstract:In few years, perovskite solar devices have reached high efficiency on lab scale cells. Upscaling to module size, effective perovskite recipe and posttreatment are of paramount importance to the breakthrough of the technology. Herein this work, the development of a low‐temperature planar n–i–p perovskite module (11 cm2 aperture area, 91% geometrical fill factor) is reported on, exploiting the defect passivation strategy to achieve an efficiency of 19.1% (2% losses stabilized) with near‐zero hysteresis, that is the most unsolved issue in the perovskite photovoltaic technology. The I/Br (iodine/bromide) halide ion ratio of the triple‐cation perovskite formulation and deposition procedure are optimized to move from small area to module device and to avoid the detrimental effect of dimethyl sulfoxide (DMSO) solvent. The organic halide salt phenethylammonium iodide (PEAI) is adopted as surface passivation material on module size to suppress perovskite defects. Finally, homogeneous and defect‐free layers from cell to module with only 8% relative efficiency losses, high reproducibility, and optimized interconnections are scaled by laser ablation methods. The homogeneity of the perovskite layers and of the full stack was assessed by optical, morphological, and light beam–induced current (LBIC) mapping characterizations. Herein, an efficiency of 19.1% with near‐zero hysteresis for a low‐temperature planar n–i–p perovskite module (11 cm2 aperture area, 91% aspect ratio) by avoiding dimethyl sulfoxide detrimental effect, by phenethylammonium iodide defect passivation and by optimized interconnections engineering is demonstrated. The scaling‐up loss from cell to module is about 8%, showing homogeneous and defect‐free layers, and high reproducibility.

20.7% highly reproducible inverted planar perovskite solar cells with enhanced fill factor and eliminated hysteresis (vol 12, pg 1622, 2019)

20.7% highly reproducible inverted planar perovskite solar cells with enhanced fill factor and eliminated hysteresis

Enabling room-temperature processed highly efficient and stable 2D Ruddlesden-Popper perovskite solar cells with eliminated hysteresis by synergistic exploitation of additives and solvents (vol 7, pg 2015, 2019)

Correction: Enabling Room-Temperature Processed Highly Efficient and Stable 2D Ruddlesden–Popper Perovskite Solar Cells with Eliminated Hysteresis by Synergistic Exploitation of Additives and Solvents

Highly Efficient and Reproducible Planar Perovskite Solar Cells with Mitigated Hysteresis Enabled by Sequential Surface Modification of Electrodes

Employing Lead Thiocyanate Additive to Reduce the Hysteresis and Boost the Fill Factor of Planar Perovskite Solar Cells

Perovskite Photovoltaics: Pseudohalide‐Induced Recrystallization Engineering for CH3NH3PbI3 Film and Its Application in Highly Efficient Inverted Planar Heterojunction Perovskite Solar Cells (adv. Funct. Mater. 2/2018)

Highly Efficient and Stable Inverted Planar Solar Cells from (fai)x(mabr)1−xpbi2 Perovskites

Efficient Planar Perovskite Solar Cells with Improved Fill Factor Via Interface Engineering with Graphene.

Refining the Substrate Surface Morphology for Achieving Efficient Inverted Perovskite Solar Cells (Adv. Energy Mater. 43/2023)

Inverted Perovskite Solar Cells with >85% Fill Factor via Sequential Interfacial Engineering

Dual-Source Precursor Approach for Highly Efficient Inverted Planar Heterojunction Perovskite Solar Cells.

Surface Optimization to Eliminate Hysteresis for Record Efficiency Planar Perovskite Solar Cells

Improved Planar Perovskite Solar Cells Using the Modified Hole Transporting Layer and Solvent Annealing

Eliminated Hysteresis and Stabilized Power Output over 20% in Planar Heterojunction Perovskite Solar Cells by Compositional and Surface Modifications to the Low-Temperature-Processed Tio2 Layer

Correction: 17% efficient printable mesoscopic PIN metal oxide framework perovskite solar cells using cesium-containing triple cation perovskite

Hysteresis‐Free Planar Perovskite Solar Module with 19.1% Efficiency by Interfacial Defects Passivation

Inverted Perovskite Solar Cells With Efficient Mixed-Fullerene Derivative Charge Extraction Layers

Enhanced Photovoltage for Inverted Planar Heterojunction Perovskite Solar Cells

Perovskite Solar Cells: High‐Performance Inverted Planar Heterojunction Perovskite Solar Cells Based on Lead Acetate Precursor with Efficiency Exceeding 18% (adv. Funct. Mater. 20/2016)

Preheating-assisted deposition of solution-processed perovskite layer for an efficiency-improved inverted planar composite heterojunction solar cell