A low-cost Mg2+/Na+ hybrid aqueous battery

Xi Cao,Lulu Wang,Jitao Chen,Junrong Zheng

DOI: https://doi.org/10.1039/c8ta04930k

IF: 11.9

2018-01-01

Journal of Materials Chemistry A

Abstract:A Mg2+/Na+ hybrid aqueous battery with high energy density is constructed using commercial Mn3O4 as a cathode and NaTi2(PO4)3 as an anode.

What problem does this paper attempt to address?

A Low-Cost Mg2+/Na+ Hybrid Aqueous Battery

Xi Cao,Lulu Wang,Jitao Chen,Junrong Zheng

DOI: https://doi.org/10.1039/c8ta04930k

IF: 11.9

2018-01-01

Journal of Materials Chemistry A

Abstract:A Mg2+/Na+ hybrid aqueous battery with high energy density is constructed using commercial Mn3O4 as a cathode and NaTi2(PO4)3 as an anode.
High Performance Hybrid Mg-Li Ion Batteries with Conversion Cathodes for Low Cost Energy Storage

Xinzhi Chen,Suqing Wang,Haihui Wang

DOI: https://doi.org/10.1016/j.electacta.2018.01.148

IF: 6.6

2018-01-01

Electrochimica Acta

Abstract:The recently proposed hybrid Mg-Li ion battery technology delivers good reaction kinetics and excellent safety features because it integrates the advantages of the Mg metal anode and the Li+ ion intercalation/conversion electrodes. The inexpensive and resource-abundant FeS is a suitable candidate as a cathode material due to its medium redox potential and high theoretical capacity; however, a conventional FeS cathode suffers from low electronic conductivity, low coulombic efficiency and poor cycling performance. Here, in this work, to overcome these drawbacks, a free-standing membrane electrode with FeS nanoparticles embedded in carbon nanofibers was designed and prepared via a facile electrospinning method. Additionally, because of the absence of inactive materials, such as the current collector and binder, the energy density was enhanced compared with that in the conventional batteries. The hybrid Mg-Li ion battery fabricated in this study can deliver a maximum energy density of similar to 300Wh kg(-1), which is superior to that of most conventional Mg ion batteries. An outstanding cyclic performance for up to 800 cycles with high coulombic efficiencies above 97% was demonstrated, and a specific capacity above 200mAh g(-1) was retained with a current density of 257mA g(-1). (c) 2018 Elsevier Ltd. All rights reserved.
Aqueous Rechargeable Li+/Na+Hybrid Ion Battery with High Energy Density and Long Cycle Life

Xueqian Zhang,Mengfei Dong,Yali Xiong,Zhiguo Hou,Huaisheng Ao,Mengke Liu,Yongchun Zhu,Yitai Qian

DOI: https://doi.org/10.1002/smll.202003585

IF: 13.3

2020-01-01

Small

Abstract:The practical application of aqueous rechargeable batteries is hampered by the low energy density and poor cycle stability, which mostly arises from the corrosion of cathode current collector, exfoliation of active material, and narrow electrochemical stability window of aqueous electrolyte. A light-weight and low-cost cathode current collector composed of graphite and carbon nanotube coated on nylon membrane exhibiting corrosion resistance and strong adhesion is developed. Also, a modified aqueous electrolyte with the addition of urea whose window is expanded to ≈3.2 V is developed that contributes to the formation of solid-electrolyte interphase on surfaces of electrodes. LiMn2 O4 /NaTi2 (PO4 )3 Li+ /Na+ hybrid ion battery using such aqueous electrolyte and current collector is demonstrated to cycle up to 10 000 times with low cost (60 dollars per kWh) and high energy density (100 Wh kg-1 ) for stationary energy storage and electronic vehicles applications.
A High‐Energy Aqueous Manganese–Metal Hydride Hybrid Battery

Meng Yang,Ru Chen,Yinlin Shen,Xiangyu Zhao,Xiaodong Shen

DOI: https://doi.org/10.1002/adma.202001106

IF: 29.4

2020-08-16

Advanced Materials

Abstract:Aqueous rechargeable batteries show great application prospects in large‐scale energy storage because of their reliable safety and low cost. However, a key challenge in developing this battery system lies in its low energy density. Herein, a high‐energy manganese–metal hydride (Mn–MH) hybrid battery is reported in which a Mn‐based cathode operated by the Mn2+/MnO2 deposition–dissolution reactions, a hydrogen‐storage alloy anode that absorbs and desorbs hydrogen in an alkaline solution, and a proton‐exchange membrane separator are employed. Given the benefit derived from the high solubility and high specific capacity of the Lewis acidic MnCl2 in the cathode and the low electrode potential of the MH anode, this aqueous Mn–MH hybrid battery exhibits impressive electrochemical properties with admirable discharge voltage plateaus up to 2.2 V, a competitive energy density of about 240 Wh kg−1 (based on the total mass of the 5.5 m MnCl2 solution and the hydrogen storage alloy electrode system), good cycling stability over 130 cycles, and a desirable rate capability. This work demonstrates a new strategy for achieving high‐performance and low‐cost aqueous rechargeable batteries.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Cost-effective, long-term aqueous rechargeable hybrid sodium/zinc batteries based on Zn anode and Na3MnTi(PO4)3 cathode

Yu Zhou,Zishuai Zhang,Yu Zhao,Jiefei Liu,Kwok-ho Lam,Xingyu Zheng,Hongtao Lou,Xianhua Hou

DOI: https://doi.org/10.1016/j.cej.2021.130459

IF: 15.1

2021-12-01

Chemical Engineering Journal

Abstract:Aqueous rechargeable batteries have promising application in large-scale energy storage owing to their cost-effective, eco-friendly, high safety and good electrochemical performance. An aqueous rechargeable hybrid sodium/zinc battery with Zn anode, Na3MnTi(PO4)3 cathode and 0.5 mol L-1 CH3COONa and Zn(CH3COO)2 mixed electrolyte has been designed for the first time. The battery delivered a reversible and stable capacity of 95.0 mAh g−1 at 1.5 C for 50 cycles with a high and flat working voltage of 1.75 V vs. Zn2+/Zn. Impressively, the battery showed the excellent cycling performance and superior rate capability, which can be cycled at 10.0 C for 2000 cycles with a capacity retention of 93.6% and a reversible capacity of 55.6 mAh g−1 at 30.0 C. Meanwhile, the co-intercalation mechanism of hybrid Na+ and Zn2+ in the cathode is elucidated by cyclic voltammogram, ex-situ XRD, ex-situ XPS and Rietveld refinement analysis. This work gets insight into the charge/discharge processes of hybrid ions for NASICON-structured Na3MnTi(PO4)3, providing a feasible way to design cost-effective, high safety and long-term aqueous rechargeable batteries.

engineering, chemical, environmental
An environment‐friendly high‐performance aqueous Mg‐Na hybrid‐ion battery using an organic polymer anode

Shengnan Zhang,Chunlin Zhao,Kai Zhu,Jiaqi Zhao,Yinyi Gao,Ke Ye,Jun Yan,Guiling Wang,Dianxue Cao

DOI: https://doi.org/10.1002/eem2.12388

2022-04-05

Abstract:Aqueous Mg ion batteries (AMIBs) show great potential in energy storage for their advantages of high capacity, abundant resource and environmental friendliness. However, the development of AMIBs is limited due to the scarcity of suitable anode materials. In this study, a new polymer anode material (PNTAQ) with flower‐like nanosheet structure is synthesized for aqueous Mg‐Na hybrid‐ion battery (AMNHIB). PNTAQ possess carbonyl functional groups which can be oxidized and reduced reversibly in aqueous solution containing alkaline metal ions. PNTAQ displays a discharge specific capacity of 245 mAh g‐1 at 50 mA g‐1 in 1 M MgCl2 + 0.5 M NaCl electrolyte, which is much higher than that in single 1 M MgCl2 or 0.5 M NaCl electrolyte. Even cycling at 1000 mA g‐1 for 1000 times, the capacity retention can still maintain at 87.2%. A full Mg‐Na hybrid‐ion cell is assembled by employing β‐MnO2 as cathode and PNTAQ as anode material, it exhibits a specific capacity of 91.6 mAh g‐1 at 100 mA g‐1. The polymer electrode material well maintains its framework structure during the discharge/charge cycling process of the hybrid‐ion battery.

materials science, multidisciplinary
A High-Performance Rechargeable Mg2+/Li+ Hybrid Battery Using One-Dimensional Mesoporous TiO2(B) Nanoflakes As the Cathode

Shuojian Su,Yanna NuLi,Zhenguo Huang,Qi Miao,Jun Yang,Jiulin Wang

DOI: https://doi.org/10.1021/acsami.6b00106

IF: 9.5

2016-01-01

ACS Applied Materials & Interfaces

Abstract:Mg(2+)/Li(+) hybrid batteries have recently been constructed combining a Mg anode, a Li(+)-intercalation electrode, and an electrolyte containing both Mg(2+) and Li(+). These batteries have been reported to outperform all the previously reported magnesium batteries in terms of specific capacity, cycling stability, and rate capability. Herein, we report the outstanding electrochemical performance of Mg(2+)/Li(+) hybrid batteries consisting of a one-dimensional mesoporous TiO2(B) cathode, a Mg anode, and an electrolyte consisting of 0.5 mol L(-1) Mg(BH4)2 + 1.5 mol L(-1) LiBH4 in tetraglyme. A highly synergetic interaction between Li(+) and Mg(2+) ions toward the pseudo-capacitive reaction is proposed. The hybrid batteries show superior rate performance with 130 mAh g(-1) at 1 C and 115 mAh g(-1) at 2 C, together with excellent cyclability up to 6000 cycles.
Aqueous Mg-Ion Battery Based on Polyimide Anode and Prussian Blue Cathode

L. Chen,J. L. Bao,X. Dong,D. G. Truhlar,Y. Wang,C. Wang,Y. Xia

DOI: https://doi.org/10.1021/acsenergylett.7b00040

IF: 22

2017-01-01

ACS Energy Letters

Abstract:The magnesium-metal battery, which consists of a cathode, a Mg-metal anode, and a nonaqueous electrolyte, is a safer and less expensive alternative to the popular Li-ion battery. However, the performance of Mg batteries is greatly limited by the low electrochemical oxidative stability of nonaqueous electrolytes, the slow Mg2+ diffusion into the cathode, and the irreversibility of Mg striping and plating on the Mg metal anode. Here, we report the first Mg-ion battery using a Mg2+ aqueous electrolyte, nickel hexacyanoferrate cathode, and polyimide anode. The operation depends on Mg2+ intercalation–deintercalation at the cathode and reversible enolization at the anode, accompanied by Mg2+ transport between cathode and anode. The cell exhibits a maximum cell voltage of 1.5 V and a supercapacitor-like high power, and it can be cycled 5000 times. This system points the way to improved Mg-based rechargeable batteries.
High-performance magnesium/sodium hybrid ion battery based on sodium vanadate oxide for reversible storage of Na+ and Mg2+

Xiaoke Wang,Titi Li,Xixi Zhang,Yaxin Wang,Hongfei Li,Hai-Feng Li,Gang Zhao,Cuiping Han

DOI: https://doi.org/10.1016/j.jechem.2024.04.016

2024-09-02

Abstract:Magnesium ion batteries (MIBs) are a potential field for the energy storage of the future but are restricted by insufficient rate capability and rapid capacity degradation. Magnesium-sodium hybrid ion batteries (MSHBs) are an effective way to address these problems. Here, we report a new type of MSHBs that use layered sodium vanadate ((Na, Mn)V8O20 5H2O, Mn-NVO) cathodes coupled with an organic 3,4,9,10-perylenetetracarboxylic diimide (PTCDI) anode in Mg2+/Na+ hybrid electrolytes. During electrochemical cycling, Mg2+ and Na+ co-participate in the cathode reactions, and the introduction of Na+ promotes the structural stability of the Mn-NVO cathode, as cleared by several ex-situ characterizations. Consequently, the Mn-NVO cathode presents great specific capacity (249.9 mAh g-1 at 300 mA g-1) and cycling (1500 cycles at 1500 mA g-1) in the Mg2+/Na+ hybrid electrolytes. Besides, full battery displays long lifespan with 10,000 cycles at 1000 mA g-1. The rate performance and cycling stability of MSHBs have been improved by an economical and scalable method, and the mechanism for these improvements was discussed.

Materials Science,Chemical Physics
Ultrathin Zn-free anode based on Ti3C2Tx and nanocellulose enabling high-durability aqueous hybrid Zn-Na battery with Zn2+/Na+ co-intercalation mechanism

Hao Chen,Weijun Zhou,Minfeng Chen,Qinghua Tian,Xiang Han,Jizhang Chen

DOI: https://doi.org/10.1007/s12274-022-4916-z

IF: 9.9

2022-09-05

Nano Research

Abstract:With low cost and high safety, aqueous zinc-based batteries have received considerable interest. Nevertheless, the excess utilization of zinc metal in the anodes of these batteries reduces energy density and increases costs. Herein, an ultrathin electrode of approximately 6.2 μm thick is constructed by coating Ti 3 C 2 T x /nanocellulose hybrid onto a stainless steel foil. This electrode is used as the Zn-free anode for aqueous hybrid Zn-Na battery, in which, a concentrated electrolyte is used to improve electrochemical reversibility. The Ti 3 C 2 T x /nanocellulose coating is found to improve the electrolyte wettability, facilitate desolvation process of hydrated Zn 2+ ions, lower nucleation overpotential, improve zinc plating kinetics, guide horizontal zinc plating along the Zn(002) facet, and inhibit parasitic side reactions. It is also found that the Na 3 V 2 (PO 4 ) 3 cathode material adopts a highly reversible Zn 2+ /Na + co-intercalation charge storage mechanism in this system. Thanks to these benefits, the assembled hybrid Zn-Na battery exhibits excellent rate capability, superior cyclability, and good anti-freezing ability. This work provides a new concept of electrode design for electrochemical energy storage.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Highly improved aqueous Zn‖LiMn2O4 hybrid-ion batteries using poly(ethylene glycol) and manganese sulfate as electrolyte additives

Jingyi Kong,Hanling Guo,Yuan Li,Min Gong,Xiang Lin,Liang Zhang,Dongrui Wang

DOI: https://doi.org/10.1039/d3se01295f

IF: 6.813

2024-01-19

Sustainable Energy & Fuels

Abstract:Aqueous Zn metal batteries are a promising candidate for low-cost, safe, and sustainable energy storage systems. Nonetheless, the practical application of such batteries is still impeded by the inferior Zn anode performance and instability of the cathode. Herein, we investigate the performance of an aqueous Zn‖LiMn 2 O 4 (Zn‖LMO) hybrid battery with a bi-salt (ZnSO 4 and Li 2 SO 4 ) electrolyte modified with a low dosage of poly(ethylene glycol) (PEG200) and MnSO 4 . The PEG additive effectively inhibits water decomposition, mitigates Zn metal corrosion, and promotes the in-plane growth of hexagonal Zn flakes. As a result, the reversibility of Zn plating/stripping and the long-term cyclability of the Zn‖LMO hybrid battery can be substantially enhanced in the modified electrolyte. Specifically, in our optimized electrolyte ZL-8% PEG-0.1 Mn, the Zn‖LMO hybrid battery exhibits an initial capacity of 91.2 mA h g −1 and a capacity retention of 50% in 500 cycles at 2C, along with improved coulombic efficiency and self-discharge behavior. This dual-additive strategy can be used to design low-cost, highly reversible, safe, and long-cycling Zn–Li hybrid-ion batteries for practical applications.

materials science, multidisciplinary,chemistry, physical,energy & fuels
High-Voltage Aqueous Magnesium Ion Batteries

Fei Wang,Xiulin Fan,Tao Gao,Wei Sun,Zhaohui Ma,Chongyin Yang,Fudong Han,Kang Xu,Chunsheng Wang

DOI: https://doi.org/10.1021/acscentsci.7b00361

IF: 18.2

2017-10-04

ACS Central Science

Abstract:Nonaqueous rechargeable magnesium (Mg) batteries suffer from the complicated and moisture-sensitive electrolyte chemistry. Besides electrolytes, the practicality of a Mg battery is also confined by the absence of high-performance electrode materials due to the intrinsically slow Mg2+ diffusion in the solids. In this work, we demonstrated a rechargeable aqueous magnesium ion battery (AMIB) concept of high energy density, fast kinetics, and reversibility. Using a superconcentration approach we expanded the electrochemical stability window of the aqueous electrolyte to 2.0 V. More importantly, two new Mg ion host materials, Li superconcentration approach we expanded the electrochemical stability window of the aqueous electrolyte to 2.0 V. More importantly, two new Mg ion host materials, Li3V2(PO4)3 and poly pyromellitic dianhydride, were developed and employed as cathode and anode electrodes, respectively. Based on comparisons of the aqueous and nonaqueous systems, the role of water is identified to be critical in the Mg ion mobility in the intercalation host but remaining little detrimental to its non-diffusion controlled process. Compared with the previously reported Mg ion cell delivers an unprecedented high power density of 6400 W kg ion cell delivers an unprecedented high power density of 6400 W kg while retaining 92% of the initial capacity after 6000 cycles, pushing the Mg ion cell to a brand new stage.

chemistry, multidisciplinary
A High Rate and Stable Hybrid Li/Na‐Ion Battery Based on a Hydrated Molten Inorganic Salt Electrolyte

Zhengying Wang,Yue Xu,Jian Peng,Mingyang Ou,Peng Wei,Chun Fang,Qing Li,Jiang Huang,Jiantao Han,Yunhui Huang

DOI: https://doi.org/10.1002/smll.202101650

IF: 13.3

2021-08-28

Small

Abstract:Taking into the consideration safety, environmental impact, and economic issue, the construction of aqueous batteries based on aqueous electrolyte has become an indispensable technical option for large-scale electrical energy storage. The narrow electrochemical window is the main problem of conventional aqueous electrolyte. Here, an economical room-temperature inorganic hydrated molten salt (RTMS) electrolyte with a large electrochemical stability window of 3.1 V is proposed. Compared with organic fluorinated molten salts, RTMS is composed of lithium nitrate hydrate and sodium nitrate with much lower cost. Based on the RTMS electrolyte, a hybrid Li/Na-ion full battery is fabricated from cobalt hexacyanoferrate cathode (NaCoHCF) and perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA) anode. The full cell with the RTMS electrolyte exhibits a fantastic performance with high capacity of 139 mAh g−1 at 1 C, 90 mAh g−1 at 20 C, and capacity retention of 94.7% over 500 cycles at 3 C. The excellent performances are contributed to the unique properties of RTMS with a large electrochemical window, solvated H2O free and high mobility of Li+, which exhibits excellent Li-ions insertion and extraction capacity of NaCoHCF. This RTMS cell provides a new economic choice for large-scale energy storage.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Low-Cost Aqueous Magnesium-Ion Battery Capacitor with Commercial Mn3O4 and Activated Carbon

Xi Cao,Lulu Wang,Jitao Chen,Junrong Zheng

DOI: https://doi.org/10.1002/celc.201800804

IF: 4

2018-01-01

ChemElectroChem

Abstract:In this work, an aqueous rechargeable magnesium-ion battery capacitor with low cost and great application potential is constructed for the first time by using commercial spinel Mn3O4 as the cathode, coupling with activated carbon as the anode. Spinel Mn3O4 experiences a phase transformation to layered Birnessite nanoflakes during the electrochemical process in aqueous MgSO4 electrolyte, which acts as the actual cathode material. By decreasing the particle size of commercial Mn3O4 from several micrometers to about 50-100 nm through a facile milling method, the nanoparticles can more easily experience the phase transformation, which results in significantly enhanced electrochemical properties, with a high reversible capacity of about 81 mAhg(-1) at a current density of 0.5 Ag-1 after 300 cycles in a three-electrode system. For comparison, the Mn3O4 without milling exhibits only 33 mAhg(-1). Coupling with activated carbon, the full cell also exhibits excellent rate and cycle performance; for example, even after 6000 cycles at the rate of 0.5 Ag-1, it still delivers a high capacity of about 81 mAhg(-1). Such outstanding electrochemical properties are obtained without adding high cost components such as graphene or forming complex nanostructures. Its low cost and scalable preparation procedure make this approach very promising for safe energy storage.
A 3-V high-voltage and long-life magnesium-potassium hybrid ion battery

Zhao Fu,Jinshuo Tan,Chuan-Fu Sun,Wenzhuo Deng

DOI: https://doi.org/10.1007/s11581-024-05549-7

IF: 2.961

2024-05-01

Ionics

Abstract:Magnesium-ion batteries are promising candidates for the next-generation energy storage systems. However, their development is restricted by the shortage of advanced insertion-type positive electrodes. Hybrid-ion batteries, which combine the facile alkali metal ions extraction/insertion of the cathode with the low-cost and high-safety magnesium metal anode, can harness the individual benefits of both electrodes and achieve satisfactory electrochemical performance. We present a high-performance magnesium-potassium hybrid ion battery utilizing a magnesium-potassium hybrid ion electrolyte, a magnesium metal anode, and a Prussian blue analogue cathode. The battery exhibits a discharge voltage of up to 3.0 V and delivers a reversible specific capacity of 120 mAh/g, resulting in an impressive energy density of 360 Wh/kg (based on the cathode mass only). Moreover, the battery demonstrates exceptional cycling stability, maintaining a capacity retention rate of 96% after 500 charge–discharge cycles at a current density of 50 mA/g. The reaction mechanism and energy storage mechanism of the hybrid ion battery were studied using various electrochemical testing methods and X-ray diffraction analysis. This work may provide new ideas and inspire the effort for the advancement of superior magnesium hybrid ion batteries.

chemistry, physical,physics, condensed matter,electrochemistry
Jahn–Teller Distortion Induced Mn2+‐Rich Cathode Enables Optimal Flexible Aqueous High‐Voltage Zn‐Mn Batteries

Lixin Dai,Yan Wang,Lu Sun,Yi Ding,Yuanqing Yao,Lide Yao,Nicholas E. Drewett,Wei Zhang,Jun Tang,Weitao Zheng

DOI: https://doi.org/10.1002/advs.202004995

IF: 15.1

2021-01-01

Advanced Science

Abstract:Although one of the most promising aqueous batteries, all Zn-Mn systems suffer from Zn dendrites and the low-capacity Mn4+/Mn3+ process (readily leading to the occurrence of Jahn-Teller distortion, which in turn causes structural collapse and voltage/capacity fading). Here, the Mn3+ reconstruction and disproportionation are exploited to prepare the stable, Mn2+-rich manganese oxides on carbon-cloth (CMOs) in a discharged state through an inverted design, which promotes reversible Mn2+/Mn4+ kinetics and mitigates oxygen-related redox activity. Such a 1.65 V Mn2+-rich cathode enable constructing a 2.2 V Zn-Mn battery, providing a high area capacity of 4.16 mA h cm(-2) (25 mA h cm(-2) for 10 mL electrolyte) and superior 4000-cycle stability. Moreover, a flexible hybrid 2.7 V Zn-Mn battery is constructed using 2-pH hydrogel electrolytes to demonstrate excellent practicality and stability. A further insight has been gained to the commercial application of aqueous energy storage devices toward low-cost, high safety, and excellent energy density.
Enabling Reversible MnO 2 /Mn 2+ Transformation by Al 3+ Addition for Aqueous Zn–MnO 2 Hybrid Batteries

Zengming Qin,Yu Song,Duo Yang,Ming-Yue Zhang,Hua-Yu Shi,Cuicui Li,Xiaoqi Sun,Xiao-Xia Liu

DOI: https://doi.org/10.1021/acsami.1c22674

2022-02-17

Abstract:Aqueous rechargeable Zn-manganese dioxide (Zn-MnO2) hybrid batteries based on dissolution-deposition mechanisms exhibit ultrahigh capacities and energy densities due to the two-electron transformation between MnO2/Mn2+. However, the reported Zn-MnO2 hybrid batteries usually use strongly acidic and/or alkaline electrolytes, which may lead to environmental hazards and corrosion issues of the Zn anodes. Herein, we propose a new Zn-MnO2 hybrid battery by adding Al3+ into the sulfate-based electrolyte. The hybrid battery undergoes reversible MnO2/Mn2+ transformation and exhibits good electrochemical performances, such as a high discharge capacity of 564.7 mAh g-1 with a discharge plateau of 1.65 V, an energy density of 520.8 Wh kg-1, and good cycle life without capacity decay upon 2000 cycles. Experimental results and theoretical calculation suggest that the aquo Al3+ with Brønsted weak acid nature can act as the proton-donor reservoir to maintain the electrolyte acidity near the electrode surface and prevent the formation of Zn4(OH)6(SO4)·0.5H2O during discharging. In addition, Al3+ doping during charging introduces oxygen vacancies in the oxide structure and weakens the Mn-O bond, which facilitates the dissolution reaction during discharge. The mechanistic investigation discloses the important role of Al3+ in the electrolyte, providing a new fundamental understanding of the promising aqueous Zn-MnO2 batteries.

materials science, multidisciplinary,nanoscience & nanotechnology
Low-cost and high safe manganese-based aqueous battery for grid energy storage and conversion

Jianhang Huang,Zhaowei Guo,Xiaoli Dong,Duan Bin,Yonggang Wang,Yongyao Xia

DOI: https://doi.org/10.1016/j.scib.2019.09.020

IF: 18.9

2019-12-01

Science Bulletin

Abstract:As an effective energy storage technology, rechargeable batteries have long been considered as a promising solution for grid integration of intermittent renewables (such as solar and wind energy). However, their wide application is still limited by safety issue and high cost. Herein, a new battery chemistry is proposed to satisfy the requirements of grid energy storage. We report a simple Cu-Mn battery, which is composed of two separated current collectors in an H2SO4-CuSO4-MnSO4 electrolyte without using any membrane. The Cu-Mn battery shows an energy density of 40.8 Wh L–1, a super-long life of 10,000 cycles (without obvious capacity decay) and negligible self-discharge. And the capital cost of US$ 11.9 kWh–1 based on electrolyte is lower than any previous batteries. More importantly, the battery can still work smoothly during thermal abuse test and drill-through test, showing high safe nature. Furthermore, a combination system integrating the Cu-Mn battery and hydrogen evolution is also proposed, which is able to avoid the generation of explosive H2/O2 mixture, and presents an efficient approach for grid energy storage and conversion.

multidisciplinary sciences
Organic Composite Materials with Enhanced Cycling Stability and High-Rate Performance As Anodes for Aqueous Mg–Li Hybrid-Ion Batteries

Shengnan Zhang,Tianzeng Bao,Kai Zhu,Yinyi Gao,Hongbin Wu,Dianxue Cao

DOI: https://doi.org/10.1021/acssuschemeng.3c05201

IF: 8.4

2023-01-01

ACS Sustainable Chemistry & Engineering

Abstract:Aqueous metal-ion batteries (AMIBs) are considered one of the potential energy-storage devices because of their high safety and low cost. Compared with traditional single-metal-ion (such as Mg or Li ion) AMIBs, the aqueous hybrid-ion batteries, such as Mg-Li hybrid-ion batteries (AMLIBs), exhibit improved Coulombic efficiency and long-term cycling stability owing to the co-intercalation/deintercalation of Mg2+ and Li+. In this study, organic polymer composite anode materials (PNTAQ@CNTs-5.7% and PNTAQ@rGO-4.4%) are designed and synthesized for AMLIBs, and they show excellent electrochemical performance characterized by up to 3000 cycles and nearly 100% Coulombic efficiency. The AMLIB full cell assembled with PNTAQ@CNTs-5.7% as the anode and Mg2MnO4 as the cathode has a power density of 63.7 Wh kg(-1) under extremely high power density of 7674.7 W kg(-1), which shows great promising potential in the development of practical aqueous batteries.
A bifunctional electrolyte for activating Mg–Li hybrid batteries

Wenlu Sun,Lu Chen,Jun Wang,Hui Zhang,Zhilong Quan,Fang Fu,Huabin Kong,Shibin Wang,Hongwei Chen

DOI: https://doi.org/10.1039/d3ta01794j

IF: 11.9

2023-01-01

Journal of Materials Chemistry A

Abstract:A dual-salt electrolyte enabled a fast co-insertion cathode and an ultra-stable Mg anode, achieving a stable full battery with acceptable energy density.

materials science, multidisciplinary,chemistry, physical,energy & fuels

A low-cost Mg<sup>2+</sup>/Na<sup>+</sup> hybrid aqueous battery

A Low-Cost Mg2+/Na+ Hybrid Aqueous Battery

High Performance Hybrid Mg-Li Ion Batteries with Conversion Cathodes for Low Cost Energy Storage

Aqueous Rechargeable Li+/Na+Hybrid Ion Battery with High Energy Density and Long Cycle Life

A High‐Energy Aqueous Manganese–Metal Hydride Hybrid Battery

Cost-effective, long-term aqueous rechargeable hybrid sodium/zinc batteries based on Zn anode and Na3MnTi(PO4)3 cathode

An environment‐friendly high‐performance aqueous Mg‐Na hybrid‐ion battery using an organic polymer anode

A High-Performance Rechargeable Mg2+/Li+ Hybrid Battery Using One-Dimensional Mesoporous TiO2(B) Nanoflakes As the Cathode

Aqueous Mg-Ion Battery Based on Polyimide Anode and Prussian Blue Cathode

High-performance magnesium/sodium hybrid ion battery based on sodium vanadate oxide for reversible storage of Na+ and Mg2+

Ultrathin Zn-free anode based on Ti3C2Tx and nanocellulose enabling high-durability aqueous hybrid Zn-Na battery with Zn2+/Na+ co-intercalation mechanism

Highly improved aqueous Zn‖LiMn2O4 hybrid-ion batteries using poly(ethylene glycol) and manganese sulfate as electrolyte additives

High-Voltage Aqueous Magnesium Ion Batteries

A High Rate and Stable Hybrid Li/Na‐Ion Battery Based on a Hydrated Molten Inorganic Salt Electrolyte

Low-Cost Aqueous Magnesium-Ion Battery Capacitor with Commercial Mn3O4 and Activated Carbon

A 3-V high-voltage and long-life magnesium-potassium hybrid ion battery

Jahn–Teller Distortion Induced Mn2+‐Rich Cathode Enables Optimal Flexible Aqueous High‐Voltage Zn‐Mn Batteries

Enabling Reversible MnO 2 /Mn 2+ Transformation by Al 3+ Addition for Aqueous Zn–MnO 2 Hybrid Batteries

Low-cost and high safe manganese-based aqueous battery for grid energy storage and conversion

Organic Composite Materials with Enhanced Cycling Stability and High-Rate Performance As Anodes for Aqueous Mg–Li Hybrid-Ion Batteries

A bifunctional electrolyte for activating Mg–Li hybrid batteries