Abstract:To address the resource utilization issue of MSWI fly ash, a method has been proposed to prepare cementitious materials using harmlessly processed MSWI fly ash (HPFA). After washing and thermal treatment, The physicochemical properties of HPFA were characterized using QXRD, ICP, XRF, and GC-MS. Cementitious materials were prepared using HPFA, gypsum and blast furnace slag (BFS) as raw materials, Through XRD, TG, FTIR, TEM, and SEM-EDS methods, the hydration and hardening characteristics were investigated, and the leaching of heavy metals from solidified materials in simulated surface water and landfill environments was evaluated using ICPMS. The results indicate that the harmless treatment can effectively reduce the chloride content and dioxins in MSWI FA but still contains heavy metals. The addition of HPFA (10%-50%) can enhance the compressive strength of cementitious materials, accelerate the exothermic process of cement hydration, and increase the total heat release of hydration, implying an improvement in the degree of hydration of the system.HPFA could effectively promote the hydration of gypsum and BFS, resulting in the higher formation of ettringite and C-(A)-SH(C/S=1,Al/Si=0.3).The formation of C(Mg/Fe)-(A)-S-H suggests that the Fe-Mg solid solution phase in HPFA may have participated in the hydration reaction. The increased stability of highly cross-linked (Q4) silicate tetrahedral structure with time implies that the material may have good durability. The leaching amount of heavy metals met the standards of Class I surface water in GB3838-2002 and GB5085.3-2007 which implies that the material has environmental safety. This study innovatively provides a preparation path for harmless MSWI fly ash and cementitious material ratios, reveals the hydration mechanism of HPFA in cementitious materials, evaluates the solidification ability of heavy metals, and provides important ideas for the resource utilization of MSWI fly ash.

Utilizing Municipal Solid Waste Incineration (MSWI) Fly Ash As a Calcium Source to Prepare Al‐substituted Tobermorite

Utilization of Cow Bone Waste and Calcium Oxide for the Solidification and Stabilization of MSWI Fly Ash: Towards Sustainable Practices

Effect of the MgO/SiO 2 Ratio on MgO–silica Binders Solidifying MSWI Fly Ash

Measurements of geotechnical properties of municipal solid waste incineration fly ash stabilized by chemical reagents

MSWI fly ash as alkaline cementitious material admixture

Utilization of Mechanochemically Pretreated Municipal Solid Waste Incineration Fly Ash for Supplementary Cementitious Material

Preparation of Alinite Cement from Municipal Solid Waste Incineration Fly Ash

Preparation of Sulphoaluminate Cement-Based Material from Municipal Solid Waste Incineration (MSWI) Fly Ash

Improving stabilization/solidification of MSWI fly ash with coal gangue based geopolymer via increasing active calcium content

Manufacture of Alkali-Activated and Geopolymer Hybrid Binder (AGHB) by Municipal Waste Incineration Fly Ash Incorporating Aluminosilicate Supplementary Cementitious Materials (ASCM).

Solidification/stabilization and optimization of municipal solid waste incineration fly ash with aluminosilicate solid wastes

Performance and Risk Assessment of Alinite Cement-Based Materials from Municipal Solid Waste Incineration Fly Ash (MSWIFA)

Utilisation of municipal solid waste incinerator (MSWI) fly ash with metakaolin for preparation of alkali-activated cementitious material

Assessing the Performance and Sustainability of Ecological Mortar with Municipal Solid Waste Incineration Fly Ash Solidified by Sulphoaluminate Cement

Preparation and Characterization of Cementitious Materials from Dedioxinized and Dechlorinated Municipal Solid Waste Incineration Fly Ash and Blast Furnace Slag

Solidification of MSWI Fly Ash Using Sodium-Montmorillonite in an Alkali-Activated Cementitious System

Preparation of Alkali Activated Cementitious Material by Upgraded Fly Ash from MSW Incineration

Working performance and microscopic mechanistic analyses of municipal solid waste incineration (MSWI) fly ash-based self-foaming filling materials

Solidification of Heavy Metal in Municipal Solid Waste Incineration Fly Ash and Performance Evolution of Alkali-Activated Foam Concrete

Utilization of Washed MSWI Fly Ash As Partial Cement Substitute with the Addition of Dithiocarbamic Chelate.

Transforming MSWI Fly Ash into Low-Carbon and High-Compatibility Composites Via Designed Calcium Sulfoaluminate-Based Binders