Abstract:Ordinary Portland cement (OPC) is the most common curing agent for solidification/stabilization (S/S) of fly ash (FA), however, the treatment is not efficient. This study aims to investigate the S/S of FA with the modified calcium aluminate cement (CAC) as a binder. The modified CAC was obtained by adding sodium dihydrogen phosphate (NaH 2 PO 4 ), an inorganic chemical agent, and sodium diethyl dithiocarbamate (DDTC), an organic chemical agent, into CAC. Toxicity characteristic leaching procedure and unconfined compressive strength (UCS) test were carried out to evaluate the treatment effect of the proposed binder. The sequential extraction procedure (SEP), X-ray diffraction and scanning electron microscopy (SEM) were used to study the chemical speciation , mineralogical characterization and microstructure of the solidified/stabilized FA. The treatment results of pure CAC and OPC showed that the immobilizing efficiency of CAC was much higher than that of OPC. When curing with 10% CAC and 1% DDTC, the leaching concentrations of Cd, Pb and Zn decreased to 0.06, 0.12 and 18.95 mg/L, respectively. With the combination of 10% CAC and 0.5% DDTC + 0.5% NaH 2 PO 4 , the leaching concentrations of Cd, Pb and Zn were 0.12, 0.16 and 10.21 mg/L, respectively. The regulated leaching limits can be met under both of the above combinations. The UCS of the solidified body was 3.02 MPa under the combination of CAC + NaH 2 PO 4 + DDTC, which was much higher than the 1.34 MPa of the CAC + DDTC combination. SEP shows that most unstable forms of Cd, Pb and Zn in FA were converted to stable forms after the treatment by modified CAC. The immobilization mechanisms of the proposed binder included encapsulation of heavy metals and the formation of heavy metal complexes or precipitate. The CAC hydration products, the precipitate and complexes reduced the pores in FA particles and therefore reduced the leachability of heavy metals. This study demonstrated the effectiveness of the proposed modified CAC as a binder for FA treatment. As NaH 2 PO 4 is inexpensive than DDTC, the scheme of CAC + NaH 2 PO 4 + DDTC is recommended.

Assessing the Performance and Sustainability of Ecological Mortar with Municipal Solid Waste Incineration Fly Ash Solidified by Sulphoaluminate Cement

Utilization of Cow Bone Waste and Calcium Oxide for the Solidification and Stabilization of MSWI Fly Ash: Towards Sustainable Practices

A Novel Approach to Heavy Metal Immobilization in Municipal Solid Waste Incineration Fly Ash: Investigating the Use of Chicken Eggshell Waste and CaO Addition

Effect of long-term dry–wet circulations on the Solidification/stabilization of Municipal solid waste incineration fly ash using a novel cementitious material

Utilization of Mechanochemically Pretreated Municipal Solid Waste Incineration Fly Ash for Supplementary Cementitious Material

Highly efficient carbonation and dechlorination using flue gas micro-nano bubble for municipal solid waste incineration fly ash pretreatment and its applicability to sulfoaluminate cementitious materials

The Long-Term Leaching Behavior of Heavy Metals in Geopolymers and Portland Cement Bricks Containing Mswi Fly Ash: A Comparative Study

Description of the female, pupa and gall of Pisphondylia brasiliensis Couri and Maia, 1992 (Diptera: Cecidomyiidae, Schizomyiina) with new records.

Improving stabilization/solidification of MSWI fly ash with coal gangue based geopolymer via increasing active calcium content

Resource Utilization of Ultrasonic Carbonated MSWI Fly Ash As Cement Aggregates: Compressive Strength, Heavy Metal Immobilization, and Environmental-Economic Analysis

Hair restoration: answered questions.

Solidification/Stabilization of Waste Incineration Fly Ash by Modified Calcium Aluminate Cement

Transforming MSWI Fly Ash into Low-Carbon and High-Compatibility Composites Via Designed Calcium Sulfoaluminate-Based Binders

Investigation of Mechanochemically Treated Municipal Solid Waste Incineration Fly Ash as Replacement for Cement

Solidification/stabilization of municipal solid waste incineration fly ash using uncalcined coal gangue–based alkali-activated cementitious materials

Utilization of pretreated municipal solid waste incineration fly ash for cement-stabilized soil

Manufacture of Alkali-Activated and Geopolymer Hybrid Binder (AGHB) by Municipal Waste Incineration Fly Ash Incorporating Aluminosilicate Supplementary Cementitious Materials (ASCM).

Study on semi-dynamic leaching and microstructure characteristics of MSWI fly ash solidified sediment

Preparation of Alkali Activated Cementitious Material by Upgraded Fly Ash from MSW Incineration

Recycle Option for Municipal Solid Waste Incineration Fly Ash (MSWIFA) as a Partial Replacement for Cement in Mortars Containing Calcium Sulfoaluminate Cement (CSA) and Portland Cement to Save the Environment and Natural Resources

Insights into Microstructural Alterations in Alkali-Activated Materials Incorporating Municipal Solid Waste Incineration Fly Ash