Abstract:Over the years, vanadium dioxide, (VO2(M1)), has been extensively utilised to fabricate thermochromic thin films with the focus on using external stimuli, such as heat, to modulate the visible through near-infrared transmittance for energy efficiency of buildings and indoor comfort. It is thus valuable to extend the study of thermochromic materials into the mid-infrared (MIR) wavelengths for applications such as smart radiative devices. On top of this, there are numerous challenges with synthesising pure VO2 (M1) thin films, as most fabrication techniques require the post-annealing of a deposited thin film to convert amorphous VO2 into a crystalline phase. Here, we present a direct method to fabricate thicker VO2(M1) thin films onto hot silica substrates (at substrate temperatures of 400 °C and 700 °C) from vanadium pentoxide (V2O5) precursor material. A high repetition rate (10 kHz) femtosecond laser is used to deposit the V2O5 leading to the formation of VO2 (M1) without any post-annealing steps. Surface morphology, structural properties, and UV-visible optical properties, including optical band gap and complex refractive index, as a function of the substrate temperature, were studied and reported below. The transmission electron microscopic (TEM) and X-ray diffraction studies confirm that VO2 (M1) thin films deposited at 700 °C are dominated by a highly texturized polycrystalline monoclinic crystalline structure. The thermochromic characteristics in the mid-infrared (MIR) at a wavelength range of 2.5-5.0 μm are presented using temperature-dependent transmittance measurements. The first-order phase transition from metal-to-semiconductor and the hysteresis bandwidth of the transition were confirmed to be 64.4 °C and 12.6 °C respectively, for a sample fabricated at 700 °C. Thermo-optical emissivity properties indicate that these VO2 (M1) thin films fabricated with femtosecond laser deposition have strong potential for both radiative thermal management or control via active energy-saving windows for buildings, and satellites and spacecraft.

Programming Emissivity on Fully Integrated VO2 Windows

A Simplified Approach for Obtaining Optical Properties of VO2 Thin Films, and Demonstration of Infrared Shape‐Shifting Devices

Gate-controlled VO2 Phase Transition for High-Performance Smart Windows.

Emissivity Measurements of Vanadium Dioxide Thin Films through the Thermal Wave Resonant Cavity and its Applications in Radiative Thermal Diode and Transistor Simulations

Infrared optical properties modulation of VO2 thin film fabricated by ultrafast pulsed laser deposition for thermochromic smart window applications

Vanadium Oxide Nanoparticles Doped Polymer to Modulate Thermal Emissivity

Adaptive Tuning of Infrared Emission Using VO2 Thin Films

Broadband Switching of Mid-Infrared Atmospheric Windows by VO2-based Thermal Emitter

VO2 microcrystals as advanced smart window material at semiconductor to metal transition

Insulator–metal transition in substrate-independent VO2 thin film for phase-change devices

On-off near-infrared absorbance based on thermal-responsive plasmonic coupling in vanadium dioxide arrays for thermochromic windows

In Situ Preparation of VO 2 Films with Controlled Ionized Flux Density in HiPIMS and Their Regulation of Thermal Radiance

High‐Performance Thermochromic VO2‐Based Coatings Deposited by Roll‐to‐Roll High‐Power Impulse Magnetron Sputtering

High-quality VO 2 thin films sputter-deposited on borosilicate glass substrates for modulating solar transmission and thermal emission

Tracking the Optical Constants of Self-Patterned VO2-based on Smart Windows During Metal-Insulator Transition

In Situ Preparation of VO2 Films with Controlled Ionized Flux Density in HiPIMS and Their Regulation of Thermal Radiance

Effect of heating/cooling dynamics in the hysteresis loop and tunable IR emissivity of VO2 thin films.

Current-modulated Optical Properties of Vanadium Dioxide Thin Films in the Phase Transition Region

Preparation and Infrared Optical Properties of VO2 Nano Array

Photothermal Synergistic Modulation of Patterned Vo2-Based Composite Films for Smart Windows

Porous vanadium dioxide thin film-based Fabry−Perot cavity system for radiative cooling regulating thermochromic windows: experimental and simulation studies