Multi-shelled LiMn1.95Co0.05O4 cages with a tunable Mn oxidation state for ultra-high lithium storage

Li Lu,Yanjie Hu,Hao Jiang,Yang Wang,Yi Jiang,Su Huang,Xiaofeng Niu,Pratim Biswas,Chunzhong Li

DOI: https://doi.org/10.1039/c7nj04457g

IF: 3.3

2018-01-01

New Journal of Chemistry

Abstract:The combined effect of tunable average Mn valence and a unique caged structure enhances superior performances of LiMn2O4 materials.

What problem does this paper attempt to address?

Multi-shelled LiMn1.95Co0.05O4 cages with a tunable Mn oxidation state for ultra-high lithium storage

Li Lu,Yanjie Hu,Hao Jiang,Yang Wang,Yi Jiang,Su Huang,Xiaofeng Niu,Pratim Biswas,Chunzhong Li

DOI: https://doi.org/10.1039/c7nj04457g

IF: 3.3

2018-01-01

New Journal of Chemistry

Abstract:Superior electrochemical performance of LiMn2O4 is considered to be one of the most important properties for lithium-ion batteries (LIBs). This paper presents an extremely high performance cathode material, multi-shelled LiMn1.95Co0.05O4 cages, which are created using a sucrose template. A small amount of Co substitution uniformly in a bulk material not only tunes Mn3+ in the minority with bulk stability improving, but can also accommodate specific capacity. In addition, the unique caged structure enhances Li+ diffusion and electrolyte penetration, leading to an outstanding rate capability. The as-synthesized cathode material exhibits a very high capacity of 154.4 mA h g(-1), and retains a high value of 136.7 mA h g(-1) after 500 cycles. The present work investigated the combined effect of a tunable average Mn oxidation state and unique multi-shelled cages in a controllable aerosol process.
Manganous Oxide-Cobalt@carbon Microcubes with a Hierarchical Mesoporous Structure for High Performance Lithium Storage

Xiaojiao Han,Yifei Feng,Dalal A. Alshammari,Hua Yuan,Wei Du,Xiao Liu,Juanna Ren,Marwan Shalash,Salah M. El-Bahy,Fuyi Jiang,Chuanxin Hou,Xiaoyu Zhang

DOI: https://doi.org/10.1007/s42114-024-00929-z

IF: 11.806

2024-01-01

Advanced Composites and Hybrid Materials

Abstract:Although manganese oxide-based materials possess excellent electrochemical performance potential, their low conductivity and unstable capacity during extended cycling prevent their seamless integration into commercial battery applications. In this study, MnO-Co@C cubes, which possess exceptional electrochemical properties due to their hierarchical mesoporous structure, were successfully synthesized as anode materials for lithium-ion batteries (LIBs). The MnO-Co microcubes are enclosed and cross-linked through biomineralization-derived carbon with a three-dimensional interconnected network, mitigating the volumetric expansion of active substances upon the insertion of lithium ions (Li+). The incorporation of cobalt not only boosts the rate capability and specific capacity, but also acts as a protective measure to prevent MnO from further oxidizing to a higher valence state, thereby guaranteeing ultra-stable long-term cycling performance. Due to the distinctive hierarchical mesoporous structure and the advantageous properties of the Co-Mn–O synergies, the MnO-Co@C electrode exhibited a reversible specific capacity of 1087.0 mAh g−1 following 200 cycles at a current density of 0.1 A g−1. Furthermore, it demonstrated remarkable cycling stability, maintaining a capacity of 799.6 mAh g−1 even after 1000 cycles at 1.0 A g−1 without any significant capacity degradation. This innovative cube-shaped material introduces a revolutionary fabrication methodology and offers profound insights into MnO-based materials and various metal oxides, positioning them as promising anode candidates for the achievement of superior electrochemical performance.
Mild Lithium‐Rich Manganese‐Based Cathodes with the Optimal Activation of Li2MnO3 for Stable and High Capacity Lithium‐Ion Batteries

Yong Chen,Quan Li,Zhuo Chen,Weihao Zeng,Zhaopei Liu,Meiyan Wang,Fanjie Xia,Guan Wang,Jinsong Wu

DOI: https://doi.org/10.1002/adfm.202411542

IF: 19

2024-08-11

Advanced Functional Materials

Abstract:By controlling the Li/TM ratio, the distribution of Li2MnO3 structural domains and the local environment of oxygen coordination are regulated. As a result, the structural damage and oxygen loss of the sample LR‐1.2 with the optimal dual‐phase structure are greatly suppressed, and it shows excellent rate performance and cycling stability (87.8%, 400th, 1C; 90.3%, 400th, 2C). The commercial application of lithium‐rich layered oxides still has many obstacles since the oxygen in Li2MnO3 has an unstable coordination and tends to be released when Li‐ion is extracted at the voltage higher than 4.5 V. In this work, a series of cobalt‐free lithium‐rich manganese‐based oxide cathodes (Li1+xTM1‐xO2, TM = Mn, Ni) are synthesized by gradually decreasing the Li/TM ratio. Among these cobalt‐free Li‐rich manganese‐based oxides (LRMO), LR‐1.2 (when Li/TM = 1.2) has an optimized dual‐phase (namely Li2MnO3 and LiTMO2‐like) structure, in which the coordination environment of part of oxygen is transformed from 4Li‐O‐2TM octahedra to 3Li‐O‐3TM octahedra due to the partial substitution of TM for Li at Li‐2b site. Thus, some of the original unstable Li–O–Li configurations change to Li–O–TM configurations, forming strong TM–O covalent bonding and enhancing the structural stability of the oxygen. Consequently, the LR‐1.2 achieved a high reversible capacity of 282.3 mAh g−1 (Coulombic efficiency of 90.9%) at 0.1 C, exhibiting outstanding cycling stability (capacity retention of 90.3% after 400 cycles at 2 C) and superior rate performance. This work establishes a correlation between the microstructure modulation tuned by the Li/TM ratio and their electrochemical performance, offering insights into the design of cathode materials for high‐performance lithium‐ion batteries.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
1D nanobar-like LiNi0.4Co0.2Mn0.4O2 as a stable cathode material for lithium-ion batteries with superior long-term capacity retention and high rate capability

Zhen Chen,Dongliang Chao,Jilei Liu,Mark Copley,Jianyi Lin,Zexiang Shen,Guk-Tae Kim,Stefano Passerini

DOI: https://doi.org/10.1039/c7ta02888a

IF: 11.9

2017-01-01

Journal of Materials Chemistry A

Abstract:In this work is reported the successful synthesis of 1D nanobar-like LiNi0.4Co0.2Mn0.4O2 (N-NCM), preferentially exposing the {010} electrochemically active facets.
Yolk-shelled LiNi0.6Co0.2Mn0.2O2 cathode for high-performance lithium ion batteries: a general synthetic strategy

Ang Gao,Tianhao Yao,Menglong Yao,Ruochen Chen,Qiangrui He,Hongkang Wang

DOI: https://doi.org/10.1039/d2ma00943a

2023-01-01

Materials Advances

Abstract:By virtue of complexing Ni/Co/Mn ions with glucose under solvothermal conditions, well-defined spherical Ni/Co/Mn-gluconate with tunable size and elemental composition is prepared and readily converted into yolk-shelled Li(NixCoyMn1-x-y)O-2. As an example, a yolk-shelled LiNi0.6Co0.2Mn0.2O2 cathode is prepared and demonstrates high specific lithium storage capacity and excellent cycling stability.
Hierarchically organized CNT@TiO2@Mn3O4 nanostructures for enhanced lithium storage performance

Du-Juan Yan,Xiao-Dong Zhu,Ya-Chun Mao,Sheng-You Qiu,Liang-Liang Gu,Yu-Jie Feng,Ke-Ning Sun

DOI: https://doi.org/10.1039/c7ta02823g

IF: 11.9

2017-01-01

Journal of Materials Chemistry A

Abstract:A new concept is conceived to design CNT@TiO2@Mn3O4 nanostructures, achieving significant synergy for high-performance lithium storage.
A comprehensive evaluation of Co, Ni, Cu and Zn doped manganese oxalate for lithium storage

Yanjie Duan,Zhixiong Huang,Xiangbin Dong,Jingyu Ren,Lin Lin,Shuhong Wu,Runping Jia,Xiaowei Xu

DOI: https://doi.org/10.1016/j.jssc.2021.122728

IF: 3.3

2022-02-01

Journal of Solid State Chemistry

Abstract:Transition metal oxalates have attracted people's attention owing to their low cost, low lithium insertion potential and high theoretical reversible capacities. Disappointingly, high irreversible capacity thanks to the formation of SEI as well as the consumption and exfoliation of active materials during the process of cycling severely restrict its application of it. In this work, a comprehensive evaluation of Co, Ni, Cu and Zn doped manganese oxalate was made. All samples are synthesized via facile and time-saving microwave hydrothermal method. It is intriguing that merely 30 min is required to accomplish the entire process and all samples possess fine electrochemical performance. As far as the four bimetallic oxalates, the resulting Mn0·5Ni0·5C2O4 exhibits the optimum performance (746.2 mA h g−1 after 100 cycles at 0.2 A g−1 and 546.7 mA h g−1 at 1 A g−1 after 400 cycles), which can be attributed to one-dimensional rod-like morphology of Mn0·5Ni0·5C2O4 as well as the synergistic and catalytic effect of Mn and Ni, resulting in faster electrode kinetics. Mn0.5Ni0.5C2O4 displays incalculable potential and can be applied in the highly reversible lithium-ion batteries.

chemistry, physical, inorganic & nuclear
Highly monodisperse dumbbell-like yolk-shell manganese monoxide/carbon microspheres for lithium storage and their lithiation evolution

Junjie Chen,Ke Yang,Huyan Yu,Tariq Shah,Qiuyu Zhang,Baoliang Zhang

DOI: https://doi.org/10.1016/j.carbon.2020.08.005

IF: 10.9

2020-12-01

Carbon

Abstract:Herein, a novel dumbbell-like MnO/C microspheres with the yolk-shell structure, high monodispersity and regular morphology are successfully prepared by calcining precursors MnCO3/RF microspheres under the vacuum condition. The effects of calcination temperature on morphology, carbonization degrees of carbon shells and pore properties of MnO/C microspheres are systematically investigated. Benefited from the yolk-shell structure, reasonable distribution of MnO nanocrystals and porous structure, MnO/C microspheres prepared at 550°C exhibit high reversible capacity of 852.6 mAh/g at 1.32 C over 500 cycles, long-term cycling stability (888.4 mAh/g at 2.64 C over 400 cycles) and excellent rate performance (454.39 mAh/g at 6.60 C and 253.28 mAh/g at 13.20 C are remained). Furthermore, the lithiation evolution of MnO/C microspheres in the long-term cycling process at nano- and micro-scales are revealed and the LiCoO2||MnO/C full cell present a great cyclic stability. Dumbbell-like MnO/C microspheres demonstrate potential applications for next-generation Li-ion batteries as anode materials profited from superior electrochemical performance.

materials science, multidisciplinary,chemistry, physical
Mixed transition-metal oxides@carbon core-shell nanostructures derived from heterometallic clusters for enhanced lithium storage

Yanting Chu,Shenglin Xiong

DOI: https://doi.org/10.1016/j.cclet.2021.06.074

IF: 9.1

2022-01-01

Chinese Chemical Letters

Abstract:Multicomponent binary metal oxide-involved hybrid structures with unique physicochemical properties have received extensive attention due to their fascinating electrochemical performance. Herein, a flexible strategy, which involves the preparation of dual-functional heterometallic Fe2M clusters and their subsequent sintering treatment, is developed to engineer novel 3D hierarchical porous structures assembled with MFe2O4 (M=Co, Mn, Ni and Zn) nanoparticles confined within carbon outer shell (denoted as MFe2O4@C HPSs). In this intriguing construction, it can be observed that MFe2O4@C HPSs comprised of carbon coated secondary MFe2O4 nanoparticles with an interconnected carbon network. The as-prepared MFe2O4@C HPSs possess combined advantages of high capacity of MFe2O4 and high conductivity of carbon. As expected, the MFe2O4@C HPSs offer a high reversible capacity, high cycling stability and superior rate performance. The interconnected conductive carbon shells facilitates fast ion and electron transport and accommodates the mechanical strain. In addition, nanosized MFe2O4 particles, which shorten the ion-transport path and provide extra electroactive sites, also improve the reaction kinetics. Moreover, these MFe2O4@C HPSs exhibit good structural integrity during repeated charging and discharging. The research perspective and strategy reported here are highly versatile and shed new light on the synthesis of other advanced electrode for various applications.

chemistry, multidisciplinary
Enhanced Electrochemical Performance of Ti-doped Li1.2Mn0.54Co0.13Ni0.13O2 for Lithium-Ion Batteries

Xin Feng,Yurui Gao,Liubin Ben,Zhenzhong Yang,Zhaoxiang Wang,Liquan Chen

DOI: https://doi.org/10.1016/j.jpowsour.2016.03.101

IF: 9.2

2016-01-01

Journal of Power Sources

Abstract:Lithium-rich manganese-based layer-structured oxides (xLi(2)MnO(3)center dot(1-x)LiNi1/3Co1/3Mn1/3O2) have attracted great attention for their potential applications as cathode materials of high energy-density lithium ion batteries. However, these oxides suffer from inferior cycling and poor rate capability due to presence of the Li2MnO3 phase. Herein, the Li+ ions in the Li-layer of the Li1.2Mn0.54Co0.13Ni0.13O2 (or 0.5Li(2)MnO(3)center dot 0.5LiNi(1/3)Co(1/3)Mn(1/3)O(2)) are partially substituted with aliovalent Ti4+ ions to improve its long-term cycling stability and rate performance. The obtained oxide (Li1.2-xTixMn0.54Co0.13Ni0.13O2, x = 2.5%) exhibits an initial capacity of 320 mAh g(-1) and a capacity retention of 71% after 300 cycles as well as good rate performance. In addition, although Ti doping cannot prevent the transformation from the layered to the spinel-like phase, it stabilizes the structure of the spinel-like phase below 3.0 V. Based on first-principles calculations and performance evaluation, these improvements are attributed to the Ti doping induced enhancement in conductivity, diffusion, activation energy of Mn migration and Ti-O bonding. This novel design may furthermore open a door for the synthesis of lithium-rich materials with high rate performance. (C) 2016 Elsevier B.V. All rights reserved.
High Performance Li[Li0.2Ni0.13Co0.13Mn0.54](BO4)0.75x(BO3)0.25xO2-3.75x Cathode with Polyanion for Li-Ion Batteries

Weifeng Huang,Biao Li,Huijun Yan,Jin Ma,Dingguo Xia,Wangsheng Chu,Ziyu Wu

DOI: https://doi.org/10.1149/ma2014-04/2/382

2014-01-01

ECS Meeting Abstracts

Abstract:Lithium rich manganese-based layered material is a promising high-capacity cathode candidate for lithium ion batteries, but it usually exhibits poor cycling stability and low safety because of the issues of oxygen ions unstability under high voltage. A strategy to promote the electrode performance of lithium rich manganese-based layered material through incorporation of boracic polyanion has been developed. As-synthesized Li[Li0.2Ni0.13Co0.13Mn0.54](BO4)0.015(BO3)0.005O1.925 showed superior reversible capacity of 300 mAh/g after 80 cycles, excellent cycling stability with a capacity retention of 89% within 300 cycles, higher thermal stability and enhanced redox couple potentials in comparison with pristine Li[Li0.2Ni0.13Co0.13Mn0.54]O2 when used as an cathode material for lithium ion batteries, which can be attributed to the tuned electronic structure after the incorporation. This facile enhanced strategy is expected to be extended to other high capacity electrode systems.
MnCo2O4 Nanospheres for Improved Lithium Storage Performance

Shuangxi Zhou,Xiangwei Luo,Lin Chen,Changjie Xu,Dongliang Yan

DOI: https://doi.org/10.1016/j.ceramint.2018.06.256

IF: 5.532

2018-01-01

Ceramics International

Abstract:Mesoporous MnCo2O4 nanospheres with an average diameter of approximately 480 nm have been synthesized by a polyvinyl pyrrolidone (PVP)-assisted solvothermal method followed by thermal annealing. MnCo2O4 nanospheres consist of many nanoparticles having sizes in range of 20-50 nm, the specific area of the sample being 24.4 m(2) g(-1). When used as the anode material for lithium ion batteries, the mesoporous MnCO2O4 nanospheres show not only an excellent cycling stability, but also an outstanding rate capability. More specially, the discharge capacities of 749.1 and 629.6 mA h g(-1) can be retained at current densities of 200 and 400 mA g(-1) after 50 cycles, respectively. In addition, the average discharge capacities of 1013.8, 827.1, 770.6, 733.3, 697.3, 651.4 and 522.4 mA h g(-1) could be observed at current densities of 100, 200, 400, 600, 800, 1000 and 2000 mA g(-1), respectively. The improved cycling stability and rate capability can be ascribed to two unique structural features of mesoporous MnCo2O4 nanospheres: namely, the mesoporous nature of electrode materials which can help to reduce the volume variation during repeated lithiation/delithiation processes, and the nanostructure which can provide a shortened Li+ transmission path. The current synthesis approach can be easily spread to prepare other binary metal oxides, including Co-free anode materials.
Building interface bonding and shield for stable Li-rich Mn-based oxide cathode

Jun Chen,Hongyi Chen,Yu Mei,Jinqiang Gao,Alvin Dai,Ye Tian,Wentao Deng,Guoqiang Zou,Hongshuai Hou,Craig E. Banks,Tongchao Liu,Khalil Amine,Xiaobo Ji

DOI: https://doi.org/10.1016/j.ensm.2022.08.024

IF: 20.4

2022-09-03

Energy Storage Materials

Abstract:Implementation of Li-rich Mn-based oxide cathode with high-energy-density has been restrained by capacity/voltage degradation that results from irreversible lattice oxygen loss and structure rearrangements. To resolve these challenges, in this work, Li 1.2 Mn 0.54 Ni 0.13 Co 0.13 O 2 encapsulated by amorphous Co x B (CB-LRM) is rationally designed via autocatalytic plating for highly reversible cationic/anionic hybrid cathode material. Band coherency is ingeniously evoked by interface-reconstruction between bulk structure and amorphous coating layer, which lower the energy of O 2p states. This is associated with strengthened orbital hybridization of O 2p -Mn 3d and increased formation energy of oxygen vacancy, which mitigates the lattice oxygen loss considerably. Additionally, interface shielding effects that protect electrode against electrolyte corrosion and the reduction of surface oxygen are also present with fully coverage of amorphous Co x B coating layer. As a result, the as-designed CB-LRM cathode exhibits excellent cycle stability after 100 loops with only 0.154% per cycle capacity fade and improved voltage degradation. Given this, this work provides a potential avenue for rational design of lattice oxygen-based electrode materials with high-energy-density.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Facile pH-mediated synthesis of morphology-tunable MnCO3 and their transformation to truncated octahedral spinel LiMn2O4 cathode materials for superior lithium storage

Sisi Huang,Baojun Chen,Heng Liu,Yun Zhang,Bo Nie,Yi Guo,Penghui Chen,H. Wu

DOI: https://doi.org/10.1039/C4TA06522K

2015-02-03

Abstract:Diverse single crystalline spinel LiMn2O4 cathode materials are derived from spherical and cubic MnCO3 precursors using a general pH-mediated chemical precipitation approach. With careful pre-controls over the particle properties of the MnCO3 precursors upon pH adjustment, five LiMn2O4 samples with an average size of 0.5–1.0 μm are obtained. Among these samples, the LiMn2O4 prepared at a pH value of 7.0 exhibits a well-defined truncated octahedral crystal structure in which most surfaces are aligned to the {111} crystalline orientations with minimal Mn dissolution, whereas a small portion of the structure is truncated along the {110} orientations to support Li diffusion. Benefiting from the unique crystal structure, the synthesized LiMn2O4 cathode manifests superior rate capability and prolonged cycle stability, especially at elevated temperatures with a capacity retention of 86.7% after 1000 cycles at 5 C under 25 °C and of 80.7% after 250 cycles at 1 C under 55 °C. These results demonstrate that the morphology of the MnCO3 precursor obtained by using the precipitation method has a significant influence on the crystal structure and electrochemical properties of resultant LiMn2O4. The work described here also shows a great potential in practical industrial applications aimed towards developing high performance LiMn2O4 electrode materials for lithium ion batteries.

Chemistry,Materials Science
High-performance ternary metal oxide anodes for lithium storage

Qing-Qing Ren,Fu-Da Yu,Cong-Min Zhang,Min-Jun Wang,Chang Liu,Zhen-Bo Wang

DOI: https://doi.org/10.1016/j.ceramint.2020.08.059

IF: 5.532

2020-12-01

Ceramics International

Abstract:Metal oxide anodes which can achieve high lithiation capacities by conversion mechanism are promising in lithium storage systems. The main obstacle to their practical applications is poor cycling performance. Regulating element ratio of multi-metal materials is effective for improving their electrochemical properties. Herein, optimized Mn–Ni–Co–O anode materials with long-cycle stability are reported. The improvement is associated with proper element ratio, which enables accelerated Li+ ion diffusion and high-stability LiF-rich solid electrolyte interphase (SEI) layer. As a result, (Ni0·1Co0·3Mn0.6)3O4 materials deliver lithiation capacities of 500 mAh g−1 after 1500 cycles at the current density of 1 A g−1. It is greatly better than other samples with different element ratio. Then, application properties of (Ni0·1Co0·3Mn0.6)3O4 materials are evaluated by assembled with active carbon and LiFePO4 for energy storage devices, respectively. The obtained Li-ion capacitor exhibits high energy densities of 112 Wh kg−1 based on total mass of oxides and active carbon. The obtained Li-ion battery also shows good cycle stability. These results suggest lithiation capacity fade of metal oxide anodes can be mitigated by controlling their component contents. This low-cost and high effective way is to promote commercial applications of metal oxide anode materials in energy storage systems.

materials science, ceramics
Preparation and Characterization of M(II) and M(IV) Iso-Molar Co-Doped LiMn1.9Mg0.05Ti0.05O4 Cathode Materials for Lithium-Ion Batteries

Wu Yue,Liu Xing-Quan,Zhang Zheng,Zhao Hong-Yuan

DOI: https://doi.org/10.3866/pku.whxb201410132

2014-01-01

Abstract:An Mg(II) and Ti(IV), iso-molar, co-doped cathode material LiMn1.9Mg0.05Ti0.05O4 for lithium-ion batteries was successfully synthesized via a sol-gel method, using lithium hydroxide, manganese acetate, magnesium nitrate, and butyl titanate as raw materials, and citric acid as a chelating agent. The as-prepared materials were characterized using thermogravimetric analysis (TGA), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and electrochemical tests (including cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) measurements). The results demonstrated that the cathode material LiMn1.9Mg0.05Ti0.05O4, which was obtained after calcination at 780 degrees C for 12 h, exhibited a fine microstructure and good electrochemical performance. When cycled at 4.35-3.30 V at room temperature, LiMn1.9Mg0.05Ti0.05O4 delivered a discharge specific capacity of 126.8 mAh.g(-1) at 0.5C rate, and maintained a capacity of 118.5 mAh.g(-1) after 50 cycles; the capacity retention of this material reached 93.5%. This material showed a discharge-specific capacity of 111.9 mAh.g(-1) at 0.5C rate after 30 cycles, when it was cycled at 55 degrees C; under these conditions the capacity retention reached 91.9%, far superior to the capacity retention of undoped LiMn2O4. The iso-molar co-doping of LiMn2O4 with Mg(II) and Ti(IV) ions led to significant modification of the electronic and ionic conductivity, and increased the rate properties and electrochemical performance of the spinel lithium manganate at elevated temperatures.
Exploit Li2MnO3 Activity by Two Phase Coexistence at Atomic Level Towards High Performance Mn-based Co-free Li-rich Cathodes

Dan Nie,Gang Sun,Yunshan Jiang,Yaru Yang,Panpan Wang,Xulei Sui,Zhenbo Wang

DOI: https://doi.org/10.1016/j.ensm.2024.103335

IF: 20.4

2024-01-01

Energy Storage Materials

Abstract:Li-rich Co-free Mn-based oxides are known as prospective cathode in Li-ion batteries originating from high energy density, environmentally friendliness and economically efficiency. However, the anion-involving redox process of the cathodes inevitably deteriorate the lattice structure, ultimately resulting in capacity fading and poor kinetics, which is closely related to the aggregated distribution of LiMn6 superstructure units. Herein, the sophisticated interplay between electrochemical performance and local structure controlled by synthesis conditions has been unlocked. It explores that the phase composition and local cationic ordering of Li1.2Mn0.6Ni0.2O2 (LNM) at atomic scale can be adjusted by synthesis atmosphere. The material obtained under argon atmosphere exhibits robust layered structure with LiTMO2-like (TM: Ni, Mn) phase intergrew with Li2MnO3 phase at atomic scale, where the Ni ions partially occupied TM layer's sites of Li2MnO3, breaking the dispersion of LiMn6 superstructure unit. The obtained two phases coexistence structure at atomic level not only fully exploit the anionic redox activity but also stabilize the crystal structure during long-term cycling, which delivered an ultrahigh discharge capacity (303.4 mAh g−1 at 0.1 C) and outstanding cyclability (capacity retention of 88.1% after 500 cycles at 1 C). This work highlights the impact of synthesis conditions on the localized electronic structure and elucidates the structure-electrochemical performance relationship, providing novel insights in the design in cathode materials for advanced Li ion battery.
Metal-Organic Framework-Derived Hierarchical MnO/Co with Oxygen Vacancies toward Elevated-Temperature Li-Ion Battery

Jia Lin,Chenghui Zeng,Xiaoming Lin,Chao Xu,Xuan Xu,Yifan Luo

DOI: https://doi.org/10.1021/acsnano.0c08808

IF: 17.1

2021-03-23

ACS Nano

Abstract:Transition metal oxides for high-temperature lithium-ion batteries have captivated orchestrated efforts for next-generation high-energy-density anodes. However, due to inherent low tap density, poor conductivity, and structural instability, their poor cyclability capacity and rate performance at elevated temperatures hinder further implementation. Oxygen vacancies (Ov) engineered by manipulating the active sites and electrical conductivity is a promising method for superior lithium storage. Herein, hierarchical MnO/Co nanoparticle-embedded N-doped carbon nanotube (CNT)-assembled carbonaceous micropolyhedrons (Ov-MnO/Co NCPs) are constructed by a "4S" self-assembly, self-template, self-adaptive, and self-catalytic metal-organic framework template method with in situ oxygen vacancies introduced. Impressively, the internal nanoparticles with metallic Co and the external N-doped carbonaceous matrix entangled by fluffy self-generated CNTs synchronously constructed hierarchical micro/nano-secondary hybrids, facilitating highly compacted density, staggered conductive network, multidirectional diffusion pathways, and accelerated electrochemical kinetics. Experimental and density functional theory investigations systematically manifested that the Ov alongside the local built-in electric field within the crystal lattice induced the boosted electrical conductivity, additional active sites, and alleviated structural expansion, further achieving the exceptional diffusivity coefficient and pseudocapacitive capacity. Benefiting from the integrated structural and compositional optimization, the Ov-MnO/Co NCPs achieved distinguished "3C" performance with superior ultralong cyclability (a volumetric capacity of 1713.5 mAh cm-3 at 1 A g-1 up to 1000 cycles), good rate capacity (a well-maintained capacity of 670.2 mAh g-1 even at 10 A g-1), and considerable high-temperature capability at 60 °C.
One-pot synthesis and multifunctional surface modification of lithium-rich manganese-based cathode for enhanced structural stability and low-temperature performance

Chao Shen,Yiqian Liu,Wenrong Li,Xiaoyu Liu,Jingwei Xie,Jinlong Jiang,Yong Jiang,Bing Zhao,Jiujun Zhang

DOI: https://doi.org/10.1016/j.jcis.2022.01.176

IF: 9.9

2022-06-01

Journal of Colloid and Interface Science

Abstract:High-energy-density lithium-rich Li1.2Ni0.13Co0.13Mn0.54O2 is regarded as one of the most promising cathode materials for lithium-ion batteries. However, its practical application is restricted by critical kinetics drawbacks and poor low-temperature electrochemical performances. In this research, Li1.2Ni0.13Co0.13Mn0.54O2 submicron particles coated by a Li7La3Zr2O12 (LLZO) layer and co-doped by La/Zr cations has been fabricated via a facile one-pot sol-gel technique and subsequent heat treatment. The coating LLZO layer with a few nanometers is able to build a rapid lithium-ion transport channel for adjacent particles and suppress severe side reactions between active material and the electrolyte. Moreover, large-radius La/Zr cations co-doping can broaden the diffusion paths of lithium ions, hinder the detrimental structural transformation, and improve the electrochemical structure stability of the cathode during repeated cycles. Owing to numerous merits from this multifunctional surface modification strategy, the modified Li1.2Ni0.13Co0.13Mn0.54O2 composite exhibits the significantly decreased interface impedance, enhanced Li+ diffusion kinetics and mitigated phase transformation, as well as excellent low-temperature electrochemical performance. It can contribute ultrahigh capacities of 173.8 mAh g-1 at -10 ℃ and 134.1 mAh g-1 at -20 ℃, respectively, displaying great application prospects of Li-rich cathode materials.

chemistry, physical
Preparation and Characterization of M(II) and M(IV) Iso-Molar Co-Doped Li Mn_(1.9)Mg_(0.05)Ti_(0.05)O_4 Cathode Materials for Lithium-Ion Batteries

Yu Wu

2014-01-01

Abstract:An Mg(II) and Ti(IV), iso-molar, co-doped cathode material Li Mn1.9Mg0.05Ti0.05O4 for lithium-ion batteries was successfully synthesized via a sol-gel method, using lithium hydroxide, manganese acetate, magnesium nitrate, and butyl titanate as raw materials, and citric acid as a chelating agent. The as-prepared materials were characterized using thermogravimetric analysis(TGA), X-ray diffraction(XRD), scanning electron microscopy(SEM), transmission electron microscopy(TEM), and electrochemical tests(including cyclic voltammetry(CV)and electrochemical impedance spectroscopy(EIS) measurements). The results demonstrated that the cathode material Li Mn1.9Mg0.05Ti0.05O4, which was obtained after calcination at 780 °C for 12 h, exhibited a fine microstructure and good electrochemical performance. When cycled at 4.35-3.30 V at room temperature,Li Mn1.9Mg0.05Ti0.05O4 delivered a discharge specific capacity of 126.8 m Ah·g-1at 0.5C rate, and maintained a capacity of 118.5 m Ah·g-1after 50 cycles; the capacity retention of this material reached 93.5%. This material showed a discharge-specific capacity of 111.9 m Ah·g-1at 0.5C rate after 30 cycles, when it was cycled at 55 °C;under these conditions the capacity retention reached 91.9%, far superior to the capacity retention of undoped Li Mn2O4. The iso-molar co-doping of Li Mn2O4 with Mg(II) and Ti(IV) ions led to significant modification of the electronic and ionic conductivity, and increased the rate properties and electrochemical performance of the spinel lithium manganate at elevated temperatures.

Multi-shelled LiMn<sub>1.95</sub>Co<sub>0.05</sub>O<sub>4</sub> cages with a tunable Mn oxidation state for ultra-high lithium storage

Multi-shelled LiMn1.95Co0.05O4 cages with a tunable Mn oxidation state for ultra-high lithium storage

Manganous Oxide-Cobalt@carbon Microcubes with a Hierarchical Mesoporous Structure for High Performance Lithium Storage

Mild Lithium‐Rich Manganese‐Based Cathodes with the Optimal Activation of Li2MnO3 for Stable and High Capacity Lithium‐Ion Batteries

1D nanobar-like LiNi<sub>0.4</sub>Co<sub>0.2</sub>Mn<sub>0.4</sub>O<sub>2</sub> as a stable cathode material for lithium-ion batteries with superior long-term capacity retention and high rate capability

Yolk-shelled LiNi<sub>0.6</sub>Co<sub>0.2</sub>Mn<sub>0.2</sub>O<sub>2</sub> cathode for high-performance lithium ion batteries: a general synthetic strategy

Hierarchically organized CNT@TiO<sub>2</sub>@Mn<sub>3</sub>O<sub>4</sub> nanostructures for enhanced lithium storage performance

A comprehensive evaluation of Co, Ni, Cu and Zn doped manganese oxalate for lithium storage

Highly monodisperse dumbbell-like yolk-shell manganese monoxide/carbon microspheres for lithium storage and their lithiation evolution

Mixed transition-metal oxides@carbon core-shell nanostructures derived from heterometallic clusters for enhanced lithium storage

Enhanced Electrochemical Performance of Ti-doped Li1.2Mn0.54Co0.13Ni0.13O2 for Lithium-Ion Batteries

High Performance Li[Li0.2Ni0.13Co0.13Mn0.54](BO4)0.75x(BO3)0.25xO2-3.75x Cathode with Polyanion for Li-Ion Batteries

MnCo2O4 Nanospheres for Improved Lithium Storage Performance

Building interface bonding and shield for stable Li-rich Mn-based oxide cathode

Facile pH-mediated synthesis of morphology-tunable MnCO3 and their transformation to truncated octahedral spinel LiMn2O4 cathode materials for superior lithium storage

High-performance ternary metal oxide anodes for lithium storage

Preparation and Characterization of M(II) and M(IV) Iso-Molar Co-Doped LiMn1.9Mg0.05Ti0.05O4 Cathode Materials for Lithium-Ion Batteries

Exploit Li2MnO3 Activity by Two Phase Coexistence at Atomic Level Towards High Performance Mn-based Co-free Li-rich Cathodes

Metal-Organic Framework-Derived Hierarchical MnO/Co with Oxygen Vacancies toward Elevated-Temperature Li-Ion Battery

One-pot synthesis and multifunctional surface modification of lithium-rich manganese-based cathode for enhanced structural stability and low-temperature performance

Preparation and Characterization of M(II) and M(IV) Iso-Molar Co-Doped Li Mn_(1.9)Mg_(0.05)Ti_(0.05)O_4 Cathode Materials for Lithium-Ion Batteries