Abstract:Vibration measurements have been widely used for structural health monitoring (SHM). Usually, wired sensors are required to attach on the testing structure, which may be arduous, costly and sometimes impossible to install those sensors on the remote and inaccessible part of the structure to be monitored. To overcome the limitations of contact sensors based vibration measurement methods, computer vision and digital image processing based methods have been proposed recently to measure the dynamic displacement of structures. Real-life structure subjected to bi-directional dynamic forces is susceptible to significant out-of-plane movement. Measuring the vibrations of structures under the out-of-plane movements using target-free vision-based methods have not been well studied. This paper proposes a target-free vision-based approach to obtain the vibration displacement and acceleration of structures subjected to out-of-plane movements from minor level excitations. The proposed approach consists of the selection of a region of interest (ROI), key-feature detection and feature extraction, tracking and matching of the features along the entire video, while there is no artificial target attached on the structure. The accuracy of the proposed approach is verified by conducting a number of experimental tests on a reinforced concrete structural column subjected to bi-directional ground motions with peak ground accelerations (PGA) ranging from 0.01 g to 1.0 g. The results obtained by the proposed approach are compared with those measured by using the conventional accelerometer and laser displacement sensor (LDS). It is found that the proposed approach accurately measures the displacement and acceleration time histories of the tested structure. Modal identification is conducted using the measured vibration responses, and natural frequencies can be identified accurately. The results demonstrate that the proposed approach is reliable and accurate to measure the dynamic responses and perform the system modal identification for structural health monitoring.

Vision-Based Measurement System for Structural Vibration Monitoring and Damage Detection

Vision-based measurement system for structural vibration monitoring using non-projection quasi-interferogram fringe density enhanced by spectrum correction method

Quasi-optical Coherence Vibration Tomography Technique for Damage Detection in Beam-Like Structures Based on Auxiliary Mass Induced Frequency Shift

Variational Mode Decomposition-Based Multirate Data-Fusion Framework for Estimating Structural Dynamic Displacement by Integrating Vision- and Acceleration-Based Measurements

Monitoring of structural dynamic behaviors by vision-based system *

Identification of Structural Dynamic Characteristics Based on Machine Vision Technology

Three-dimensional translation vibration measurement system based on linear array sensor and composite fringe pattern

Vision-based Structural Vibration Measurement for Smart Structural Health Monitoring

Vision-based Structural Displacement Measurement: System Performance Evaluation and Influence Factor Analysis

A Vision-Based System for Dynamic Displacement Measurement of Long-Span Bridges: Algorithm and Verification

Noncontact structural dynamic characteristics identification method and its test verification

Vision and Vibration Data Fusion-Based Structural Dynamic Displacement Measurement with Test Validation

Target-free Vision-Based Technique for Vibration Measurements of Structures Subjected to Out-of-plane Movements

Vision-based fringe projection measurement system for radial vibration monitoring of rotating shafts

Modal analysis of beam-like structures using multipoint dynamic testing vision system based on composite fringe pattern

Vision-based system for simultaneous monitoring of shaft rotational speed and axial vibration using non-projection composite fringe pattern

Three-Dimensional Vibration Measurement of Monocular Vision Based on Composite Feature Pattern

Research on Structural Damage Identification Method Based on Optical Flow Method and Flexibility Difference

Framework for long-term structural health monitoring by computer vision and vibration-based model updating

Visual–inertial Structural Acceleration Measurement

Real-time Three-Dimensional Vibration Monitoring of Rotating Shafts Using Constant-Density Sinusoidal Fringe Pattern As Tri-Axial Sensor