Abstract:This study investigates a new semi-fixed-abrasive, ultra-fine finishing method for optical glass using a magneticcompound fluid (MCF) wheel. This MCF wheel generates a thin, uniform MCF slurry layer on the entire circumferentialsurface of a ring-shaped permanent magnet placed between two non-magnetic plates. The MCF slurry is composed ofnano-sized magnetite particles, micron-sized iron particles, several 10 μm-sized α-cellulose fibres and sub-micron-sizedabrasive particles that react to the magnetic field. Following modifications to the design of the MCF, experiments wereconducted to evaluate the performance of the modified wheel in spot-polishing fused silica glass. This paper describes themodifications to the MCF wheel and the experimental setup used to measure its performance. The improvement of themodified wheel over the unmodified wheel in terms of material removal and surfaces roughness is experimentallyconfirmed. The effects of the wheel rotational speed and the clearance between the wheel and the workpiece on materialremoval and the workpiece surface roughness are investigated. The polishing forces are measured, the structure of the MCFslurry is examined and the magnetic field distribution is analysed. A model of material removal in polishing with themodified MCF wheel is developed. The results indicate the following: (1) more material was removed, i.e., greater spotdepths, and better surfaces were obtained in the regions that were near the edges of the magnet; (2) the modified MCF wheelperformed much better than the unmodified wheel in terms of material removal and surface roughness, e.g., 3.1 μm vs. 1.7μm for the maximum spot depth, 0.04 mm3 vs. 0.0088 mm3 for the volume of material removed and Ra = 5.624 nm vs.14.67 nm for the surface roughness; (3) a better work surface and greater material removal were obtained with smallerworking clearances and higher wheel rotational speeds.

0705 Ultra Precision Surface Polishing of Fused Silica Using MCF Wheel Based on Prolongation of Wheel Life

Ultrafine Surface Finishing of Fused Silica Glass Using MCF (magnetic Compound Fluid) Wheel

C25 Fundamental Study on Precision Polishing of Sapphire Wafer Using MCF Wheel : Experimental Investigation of Wheel Working Life Based on Measurement of Polishing Temperature

Nano-Precision Synergistic Finishing Process Integrated ELID-Grinding and MRF

Fundamental performance of Magnetic Compound Fluid (MCF) wheel in ultra-fine surface finishing of optical glass

C01 Fundamental Performance of MCF (magnetic Compound Fluid) Wheel in Optical Glass Polishing

Incined Magnetorheological Finishing and Its Path Controlling

C08 Study on Surface Polishing Process Using Magnetic Compound Fluid (MCF)

Fundamental Performance of Magnetic Compound Fluid (MCF) Polishing Tool in Metal Surface Finishing

Nano-precision Polishing of CVD SiC Using MCF (magnetic Compound Fluid) Slurry

2206 Magnetic Field-Assisted Polishing of Miniature V-grooves Using MCF(Magnetic Compound Fluid) Slurry

Development of Ultrasonic Vibration-Assisted Magnetic Compound Fluid (MCF) Polishing Technology

Polishing Investigation on Zirconia Ceramics Using Magnetic Compound Fluid Slurry

Effects of Water Supply Using Ultrasonic Atomization on the Working Life of MCF Slurry in MCF Polishing

Ultrafine Polishing of Optical Polymer with Zirconia-Coated Carbonyl-Iron-particle-based Magnetic Compound Fluid Slurry

The Effect of Magnetic Field Distribution on Material Removal in Magnetic Compound Fluid Wheel Polishing

An Ultra-Precision Polishing Technique Using High-Velocity Abrasive Fluid

Effects of Alpha-Cellulose Supply on the Working Life of MCF Slurry in MCF Polishing

Fundamental Performance of Magnetic Compound Fluid Polishing Liquid in Contact-Free Polishing of Metal Surface

C04 High form accuracy polishing in 3D micro structure using MCF (magnetic compound fluid) assisted low frequency vibration

Study of Three-Dimensional Polishing Using Magnetic Compound Fluid (MCF)