Abstract:Graphite dust is an important issue for the operation and maintenance of high-temperature gas-cooled reactor (HTGR), because the transport of fission product (FP) is coupled closely with graphite dusts. For instance, vapor phase FP could condense as flowing through the steam generator (SG) and deposit on the surface of graphite dusts that are either air-borne or already deposited on SG tubes. In water ingress or loss-of-coolant accidents, these dusts may re-suspend and contribute to the source term. Despite the importance of graphite dusts in HTGRs, the transport and deposition of dust particle are far from being fully understood, neither particle-fluid nor particle-wall interactions. In this work we present a numerical study on the particle transport through upper 5 layers of SG tubes. Particularly, the particle impaction process is simulated by Finite Element Method (FEM) with adhesion and dissipation specially accounted. The FEM simulation predicts the critical adhesion velocity and restitution coefficient when rebound occurs. Then we substitute the particle impaction model into Eulerian-Lagrangian simulation of flow field and extract the deposition rate statistically. The result shows that for small particles (< 5 μm), the deposition rate is controlled by the collision rate, which is mainly determined by the interaction between turbulence and thermophoresis. The particle-vortex interaction is essentially important for the distribution of particles near wall and thus influences the deposition rate. For large particles the deposition rate is more affected by the sticking efficiency, which is simultaneously controlled by both the critical adhesion velocity and normal impaction velocity. Therefore, the deposition rate first increases then decreases with particle size and reaches maximum at about 5 μm.

Icone23-1404 influence of the forces on the adhesion behavior of graphite dust in htgr

A Parametric Study of Graphite Dust Deposition on High-Temperature Gas-Cooled Reactor (HTGR) Steam Generator Tube Bundles

Study on the resuspension of graphite dust based on the Rock'n'Roll model

Adhesion study between micron-scale graphite particles and rough walls using the finite element method

Graphite Dust Deposition on HTGR Steam Generator: Effects of Particle-Wall and Particle-Vortex Interactions

Study of the Deposition of Graphite Dust in the Inlet Passageway of Intermediate Heat Exchanger in VHTR

Analysis of Graphite Dust Deposition in Hot Gas Duct of HTGR

Characterization of Graphite Dust Produced by Pneumatic Lift

A Numerical Analysis on Graphite Dust Deposition and Resuspension in HTR-10 Steam Generator

Preliminary analysis of graphite dust releasing behavior in accident for HTR

Wetting and Spreading Behavior of Molten Iron in Contact with Graphite Substrate: Interfacial Effects

Effect of Particle-wall Interaction on Graphite Dust Deposition on HTGR Steam Generator Tube

Resuspension of Multilayer Graphite Dust Particles in a High Temperature Gas-Cooled Reactor

Graphite Dust Motion in Steam Generator of High Temperature Gas-cooled Reactor

The Critical Sticking Velocity of Non-Spherical Graphite Particles: A Numerical Study and Validation

Thermophoretic and Turbulent Deposition of Graphite Dust in Htgr Steam Generators

Analysis of Graphite Dust Deposition in Steam Generator of Htr

A Numerical Study of Graphite Particle Motion on a Helium Turbine Wall in a High-Temperature Gas-Cooled Reactor System

An Experimental Investigation on the Settling Velocity and Drag Coefficient of Micrometer-Sized Natural, IG-110, NG-CT-10 and A3-3 Graphite Particles

NUMERICAL SIMULATION OF GRAPHITE DUST DEPOSITION IN PEBBLE BED REACTOR CORE OF HTGR

Study on Graphite Particle Motion and Impact in the Helium Circulator of HTGR