Abstract:Purpose: Computational fluid dynamics (CFD) and 4D-flow magnetic resonance imaging (MRI) are synergically used for the simulation and the analysis of the flow in a patient-specific geometry of a healthy thoracic aorta. Methods: CFD simulations are carried out through the open-source code SimVascular. The MRI data are used, first, to provide patient-specific boundary conditions. In particular, the experimentally acquired flow rate waveform is imposed at the inlet, while at the outlets the RCR parameters of the Windkessel model are tuned in order to match the experimentally measured fractions of flow rate exiting each domain outlet during an entire cardiac cycle. Then, the MRI data are used to validate the results of the hemodynamic simulations. As expected, with a rigid-wall model the computed flow rate waveforms at the outlets do not show the time lag respect to the inlet waveform conversely found in MRI data. We therefore evaluate the effect of wall compliance by using a linear elastic model with homogeneous and isotropic properties and changing the value of the Young's modulus. A stochastic analysis based on the polynomial chaos approach is adopted, which allows continuous response surfaces to be obtained in the parameter space starting from a few deterministic simulations. Results: The flow rate waveform can be accurately reproduced by the compliant simulations in the ascending aorta; on the other hand, in the aortic arch and in the descending aorta, the experimental time delay can be matched with low values of the Young's modulus, close to the average value estimated from experiments. However, by decreasing the Young's modulus the underestimation of the peak flow rate becomes more significant. As for the velocity maps, we found a generally good qualitative agreement of simulations with MRI data. The main difference is that the simulations overestimate the extent of reverse flow regions or predict reverse flow when it is absent in the experimental data. Finally, a significant sensitivity to wall compliance of instantaneous shear stresses during large part of the cardiac cycle period is observed; the variability of the time-averaged wall shear stresses remains however very low. Conclusions: In summary, a successful integration of hemodynamic simulations and of MRI data for a patient-specific simulation has been shown. The wall compliance seems to have a significant impact on the numerical predictions; a larger wall elasticity generally improves the agreement with experimental data.

1307 Numerical Experiment and Experimental Application of Ultrasonic-Measurement Integrated-Simulation with PVA Straight Pipe Model(1)

EXPERIMENTAL VALIDATION OF ULTRASONIC-MEASUREMENT-INTEGRATED SIMULATION FOR BLOOD FLOW IN AORTA

NUMERICAL EXPERIMENT FOR ULTRASONIC-MEASUREMENT-INTEGRATED SIMULATION OF DEVELOPED LAMINAR PIPE FLOW USING AXISYMMETRIC MODEL

Numerical Study of Violent Impact Flow Using a CIP-Based Model

Experimental Validation of Color Doppler Velocity Measurement for Ultrasonic-Measurement-Integrated Simulation of Blood Flow

Experimental Study on Hemodynamics of an End-to-side Anastomosis

A Method Combining Measurement Tool and Numerical Simulation for Calculating Acoustic Signals of Ultrasonic Flowmeter

The Research of 1D / 3D Coupling Simulation on Pump and Pipe System

NUMERICAL REALIZATION OF BLOOD FLOW IN ANEURYSMAL AORTA BY INTEGRATING MEASUREMENT AND SIMULATION

Numerical Analysis of Transducer Installation Effect on Ultrasonic Gas Flow Meter

Data Integration for Multi-Path Ultrasonic Flowmeter Based on Levenberg–Marquardt Algorithm

Model simulation and experimental research of acoustic-plane installation angle of multi-path ultrasonic gas flowmeter

Numerical simulation of two-phase non-Newtonian blood flow with fluid-structure interaction in aortic dissection

Numerical Simulation in the Abdominal Aorta and the Visceral Arteries with or Without Stenosis Based on 2D PCMRI

A Modified Method of Computed Fluid Dynamics Simulation in Abdominal Aorta and Visceral Arteries

Investigation of pulsatile flowfield in healthy thoracic aorta models

Development and Feasibility Study of a Two-Dimensional Ultrasonic-Measurement-integrated Blood Flow Analysis System for Hemodynamics in Carotid Arteries.

Three-dimensional numerical simulation of hemodynamics in human aortic arch

Validation of Numerical Simulations of Thoracic Aorta Hemodynamics: Comparison with In Vivo Measurements and Stochastic Sensitivity Analysis

Validation of the Reduced Unified Continuum Formulation Against In Vitro 4D-Flow MRI

Experimental Study of a Simulated Blood Flow Velocity Measurement System Via Very-High-Frequency Ultrasound