Abstract:Abstract In this paper, the influence of air film holes on the stress distribution of nickel-based single-crystal superalloy blades is investigated, a simulated test piece is designed for the analysis and test of the stress distribution of air film holes, and a method of quantitative inverse inference of the stress at the edge of the air film holes is proposed. Finite element simulation of high circumferential vibration fatigue of the simulated test piece was carried out by ANSYS to obtain the gradient of stress distribution at the hole edge. The EBSD technique was used to measure the dimensions of the plastic zone in the region near the fracture, and the quantitative fatigue stresses were extrapolated using a crack tip plastic zone model with Tresca yield criterion. The compressive stress exerted by the femtosecond laser perforation method on the air film aperture wall was detected by the nanoindentation technique, and the residual stress was analysed using the S. Suresh computational model. The results of this study show that based solely on finite element simulation, it is not possible to completely simulate the effect of residual stresses caused by machining on fatigue fracture, which in turn leads to a lack of conformity between the results of finite element simulation and the results of the inverse plastic zone size extrapolation; however, the stress magnitude at the edge of the hole can be well computed by combining the stress concentration coefficients from finite element simulation with the stresses from the inverse plastic zone size extrapolation after taking into account the residual stresses from machining. The quantitative analysis results of this method have an error within 1.3 times the dispersion band compared to the test data.

OS11W0243 Evaluation of Crack Initiation Limit in Fretting Fatigue Based on the Singular Stress Field Near the Contact Edge

Depth-sensing Indentation Measurement and Finite Element Analysis of Residual Stress Field Near Fatigue Crack Tip

Prediction of Location of Fretting Fatigue Crack Initiation Subject to High Stress Ratio Cyclic Load

Fracture Mechanics Assessment of Stress Concentrations in Incomplete Fretting Contacts

In-situ Observation and Finite Element Analysis of Fretting Fatigue Crack Propagation Behavior in 1045 Steel

Quantitative Study of High-Frequency Fatigue Hole-Edge Stresses in Nickel-Based Single-Crystal Superalloy

Component Structural Equivalent Research Based on Different Failure Strength Criterions and the Theory of Critical Distance

An analysis of fatigue crack features at various crack lengths through mating fracture surface pairs

Experimental and numerical study on the fretting wear-fatigue interaction evolution in press-fitted axles

Experimental and Numerical Investigations of Fretting Fatigue Behavior for Steel Q235 Single-Lap Bolted Joints

Fatigue Crack Growth for Ferritic Steel under Negative Stress Ratio

Comparison of the continuum damage and fracture mechanics in fatigue assessment of components containing residual stresses

Experimental and numerical study on the multi‐site fretting fatigue crack initiation of press‐fitted axles

A coupled wear and crack initiation-propagation methodology for fretting fatigue life assessment in press-fitted axles

Accumulated crystal plasticity dissipation energy driven continuum damage two-scale model for fretting fatigue initiation life

Effect of maximum applied cyclic stress on fretting fatigue stress distribution of flat-on-flat modified 9Cr-1Mo steel contact: Finite element analysis

A Structural Stress Approach Accounting for Notch Effects on Fatigue Propagation Life: Part I Theory

Damage-Based Assessment of the Fatigue Crack Initiation Site in High-Strength Steel Welded Joints Treated by HFMI

Unified Evaluation of Fatigue Crack Growth Rates under Rotating Bending and Plane Bending.

Stress and energy release rate analysis of cross-ply carbon fiber-reinforced plastic laminate with transverse cracks subjected to ultrasonic vibration using a variational approach

A fretting crack initiation prediction taking into account the surface roughness and the crack nucleation process volume