Li2TiSiO5: a low potential and large capacity Ti-based anode material for Li-ion batteries

Jingyuan Liu,Wei Kong Pang,Tong Zhou,Long Chen,Yonggang Wang,Vanessa K. Peterson,Zhongqin Yang,Zaiping Guo,Yongyao Xia

DOI: https://doi.org/10.1039/c7ee00763a

2017-01-01

Abstract:Li2TiSiO4with a 0.28 V operational potential may fill the gap between the present 0.1 V carbonaceous and the 1.5 V Li4Ti5O12electrodes.

What problem does this paper attempt to address?

Li2TiSiO5: a low potential and large capacity Ti-based anode material for Li-ion batteries

Jingyuan Liu,Wei Kong Pang,Tong Zhou,Long Chen,Yonggang Wang,Vanessa K. Peterson,Zhongqin Yang,Zaiping Guo,Yongyao Xia

DOI: https://doi.org/10.1039/C7EE00763A

2017-01-01

Abstract:To date, anode materials for lithium-ion batteries (LIBs) have been dominated by carbonaceous materials, which have a low intercalation potential but easily allow lithium dendrites to form under high current density, leading to a safety risk. The other anode material, the “zero-strain” spinel-structured Li4Ti5O12, with a ∼1.5 V vs. Li+/Li intercalation potential, exhibits excellent cycling stability and avoids the issues of dendrite growth and Li plating. The low capacity and high voltage of Li4Ti5O12, however, result in low energy density. Herein, we report a new and environmentally friendly anode material, Li2TiSiO5, which delivers a capacity as high as 308 mA h g−1, with a working potential of 0.28 V vs. Li+/Li, and excellent cycling stability. The lithium-storage mechanism of this material is also proposed based on the combination of in situ synchrotron X-ray diffraction, neutron powder diffraction with Fourier density mapping, ex situ X-ray absorption near edge structure analysis, ex situ transmission electron microscopy, and density-functional theory calculations with the projector-augmented-wave formalism. The lithium-storage mechanism of this material is shown to involve a two-electron (Ti4+/Ti2+ redox) conversion reaction between TiO and Li4SiO4.
Li Storage in a Low Intercalation Potential Li 2 TiSiO 5

Yong-Yao Xia

DOI: https://doi.org/10.1149/ma2018-01/3/597

2018-01-01

Abstract:Today’s anode for lithium ion batteries is dominated by graphite, with a low operate voltage at 0.1 V vs. Li+/Li, easy to format lithium dendrite and cause to safety risk. As an alternative anode material, the “zero-strain” spinel structure Li4Ti5O12 could avoid Li plating with a relative high intercalation potential (1.55 V vs. Li+/Li) and exhibits an excellent cycling stability. However, the slightly low capacity and high voltage of Li4Ti5O12 result in low energy density. Therefore, it is very important, but nevertheless a challenge, to develop a negative electrode material with a large capacity and an intercalation potential below 1 V, but not close to the Li plating potential, to ensure the safety of batteries. Herein, we report a new anode material of Li2TiSiO5 as anode material for LIBs. The electrochemical profile, structure and Li storage mechanism were extensively studied. The crystal structure of Li2TiSiO5 is illustrated as a layered structure with infinite sheets of distorted TiO6 octahedra and SiO4 tetrahedra, linked by Li atoms. The distorted TiO6 octahedral and SiO4 tetrahedral networks are thought to be the origin of the structural stability of this material. The crystal structure is depicted in Fig. 1b (left) and the details are summarized in Table 1. Along with the refined structure of Li2TiSiO5, the nuclear-density difference (Fourier) map in Fig. 1b (middle) reveals negative nuclear density only at the 4d, 4e, and Ti (2c) sites, implying that lithium can only reside at these sites. The 4e sites are indicated by the yellow balls in Fig. 1b (right). Figure 2 give the typical charge/discharge curve of Li 2TiSiO5 at between 0 and 3 V (vs. Li+/Li), delivers a reversible charge capacity (Li-ion extraction) of 308 mAh/g, with a voltage plateau below 1.0 V. Fig. 1 (a) Crystal structure characterization of Li2TiSiO5 and (b) typical charge/discharge curve of Li2TiSiO5 Figure 1
A Low-Voltage Layered Na2 TiGeO5 Anode for Lithium-Ion Battery.

Zhiwei Liu,Di He,Boya Wang,Tianhao Wu,Shu Zhao,Xunlu Li,Shiman He,Yuan Liang,Yongning Zhou,Shuhui Sun,Haijun Yu

DOI: https://doi.org/10.1002/smll.202107608

IF: 13.3

2022-01-01

Small

Abstract:Titanium-based anode materials have achieved much progress with the wide studies in lithium-ion batteries. However, these known materials usually possess high discharge voltage platforms and limited energy densities. Herein, a titanium-based oxide of Na2TiGeO5 with layered structure, two-dimensional lamellar frame and exposed highly active (001) facet, exhibiting good electrochemical performance in terms of high capacity (410 mAh g(-1) with a current density of 50 mA g(-1)), excellent rate capability and cycling stability with no obvious capacity attenuation after 4000 cycles, is reported. The appropriate discharge voltage plateau at around 0.2 V endows the Na2TiGeO5 anode material high security compared with graphite and high energy density compared with spinel Li4Ti5O12. Combining the electrochemical tests and the density functional theory calculations, the Li+ storage mechanism of Na2TiGeO5 is elucidated and the conversion reaction process is revealed. More importantly, this study provides a way to develop low-voltage and high-capacity titanium-based anode materials for efficient energy storage.
Polyanion-Type Anode Material for Lithium-Ion Batteries

Yong-Yao Xia

DOI: https://doi.org/10.1149/ma2019-04/1/77

2019-01-01

Abstract:Today’s anode for lithium ion batteries is dominated by graphite, with a low operate voltage at 0.1 V vs. Li+/Li, easy to format lithium dendrite and cause to safety risk. As an alternative anode material, the “zero-strain” spinel structure Li4Ti5O12 could avoid Li plating with a relative high intercalation potential (1.55 V vs. Li+/Li) and exhibits an excellent cycling stability. However, the slightly low capacity and high voltage of Li4Ti5O12 result in low energy density. Herein, we report several polyanion-type anode materials for Li (Na)-ion Batteries (Figure 1). Figure 2 gives the crystal structure of Li2TiSiO5, which is illustrated as a layered structure with infinite sheets of distorted TiO6 octahedra and SiO4 tetrahedra, linked by Li atoms. The distorted TiO6 octahedral and SiO4 tetrahedral networks are thought to be the origin of the structural stability of this material. Figure 2 gives the typical charge/discharge curve of Li2TiSiO5 at between 0 and 3 V (vs. Li+/Li), delivers a reversible charge capacity (Li-ion extraction) of 308 mAh/g, with a voltage plateau below 1.0 V. Fig. 1 (a) Phase diagram of polyanion-type materials. (b) Crystal structure of Li2TiSiO5 and (c) typical charge/discharge curve References： [1] Y-Y Xia, et al. Energy Environ. Sci. 2017, 10 , 1456-1464; [2] Y-Y Xia, et al. Electrochim. Acta, 2018, 260, 695-702; [3] Y-Y Xia, et al. ACS Appl. Energy Mater. 2018, doi10.1021/acsaem.8b01412. Figure 1
TiO 2 Nanocrystal‐Framed Li 2 TiSiO 5 Platelets for Low‐Voltage Lithium Battery Anode

Di He,Boya Wang,Tianhao Wu,Heng Su,Xu Zhang,Yang Ren,Gui‐Liang Xu,Zhiwei Liu,Jinshu Wang,Khalil Amine,Haijun Yu

DOI: https://doi.org/10.1002/adfm.202001909

IF: 19

2020-08-26

Advanced Functional Materials

Abstract:Titanium‐based anode materials are attracting considerable attention for use in high‐performance lithium‐ion batteries, but the compromised energy density caused by high voltage plateaus and unsatisfactory capacities severely retards their practical applications. Herein, a molten‐salt synthesis of Li2TiSiO5 crystalline platelets and a subsequent selective facet modification by in situ growth of TiO2 nanocrystal frames are facilely achieved. The discharge voltage plateau at around 0.5 V renders the Li2TiSiO5 anode safe compared with graphite and confers a high energy density compared with zero‐strain Li4Ti5O12 anode. With the optimized size, structure, and content of modified TiO2 nanocrystals associated with the exposed (001) plane of Li2TiSiO5, the Li2TiSiO5‐based anodes can deliver a capacity of above 300 mAh g−1, enhanced rate performance, and a capacity retention of 66% after 10 000 cycles. In situ X‐ray diffraction and ex situ transmission electron microscopy have demonstrated the structural stability of the anodes upon charge/discharge. Further theoretical calculation reveals 3D migration paths of Li+ ions in Li2TiSiO5. The selective modification of in situ grown TiO2 nanocrystals on certain facets of crystallites opens a new door for the development of electrode materials possessing superior electrochemical properties.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
SiO@C/TiO2 nanospheres with dual stabilized architecture as anode material for high-performance Li-ion battery

Long Liu,Xinxi Li,He,Guoqing Zhang,Guanji Su,Chenhui Fang,Gen He

DOI: https://doi.org/10.1016/j.jallcom.2020.155407

IF: 6.2

2020-09-01

Journal of Alloys and Compounds

Abstract:Silicon-based materials have been widely used as anode materials in lithium-ion batteries (LIBs) because of the high specific capacity. However, there exist some shortcomings, especially in the thermal stability of the batteries, as well as huge volume expansion (>300%) causes structural cracking. Herein, a core-shell structured /TiO2 nanospheres has been successfully synthesized via ball milling and sol-gel method, the morphological, componential and thermal features are characterized with X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy. The results exhibit that the SiO could spontaneously absorb the huge volume expansion stress, the C/TiO2 shell as a compact fence was utilized to effectively enhance the electrical conductivity and further control the integrity and stability of well-wrapped core-shell framework during the charge/discharge processes. The electrochemical analysis show the /TiO2 nanospheres possess a remarkably high initial coulomb efficiency of 97%. The reversible capacity can reach to 1565 mA h g−1 at 0.1 A g−1 after 100 cycles, which is higher than those of N–SiO (1353 mA h g−1) and (1326 mA h g−1). Even at 2 A g−1, it exhibit a discharge capacity of 844.6 mA h g−1 after 220 cycles. This excellent performance can be primarily attributable to the well-designed core-shell structure of /TiO2 nanospheres, where the outer rigid C/TiO2 coating can not only effectively alleviate the large volume change of SiO but also maintain the stable structure of anode materials, which are considered as a promising candidate to the anode material for new generation power LIBs.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
A Low‐Voltage Layered Na 2 TiGeO 5 Anode for Lithium‐Ion Battery

Zhiwei Liu,Di He,Boya Wang,Tianhao Wu,Shu Zhao,Xunlu Li,Shiman He,Yuan Liang,Yongning Zhou,Shuhui Sun,Haijun Yu

DOI: https://doi.org/10.1002/smll.202107608

IF: 13.3

2022-02-19

Small

Abstract:Titanium-based anode materials have achieved much progress with the wide studies in lithium-ion batteries. However, these known materials usually possess high discharge voltage platforms and limited energy densities. Herein, a titanium-based oxide of Na2TiGeO5 with layered structure, two-dimensional lamellar frame and exposed highly active (001) facet, exhibiting good electrochemical performance in terms of high capacity (410 mAh g–1 with a current density of 50 mA g–1), excellent rate capability and cycling stability with no obvious capacity attenuation after 4000 cycles, is reported. The appropriate discharge voltage plateau at around 0.2 V endows the Na2TiGeO5 anode material high security compared with graphite and high energy density compared with spinel Li4Ti5O12. Combining the electrochemical tests and the density functional theory calculations, the Li+ storage mechanism of Na2TiGeO5 is elucidated and the conversion reaction process is revealed. More importantly, this study provides a way to develop low-voltage and high-capacity titanium-based anode materials for efficient energy storage.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
NaTiSi2O6/C Composite as a Novel Anode Material for Lithium-Ion Batteries

Kun Liu,Yao Liu,Haifeng Zhu,Xiaoli Dong,Yonggang Wang,Congxiao Wang,Yongyao Xia

DOI: https://doi.org/10.3866/PKU.WHXB201912030

2020-01-01

Acta Physico-Chimica Sinica

Abstract:The development of human society and the continuously emerging environmental problems call for cleaner energy resources. Lithium-ion batteries, since their commercialization in the early 1990s, have been an important power source of mobile phones, laptops as well as other portable electronic devices. Their advantages include environment-friendliness, light weight, and no memory effect compared with lead-acid or nickel-cadmium batteries. Electrode materials play an important role in the performance of lithium-ion batteries. The traditional commercial anode material, graphite, has a theoretical specific capacity of 372 mAng -1 and working potential close to 0 V (vs Li+/Li), making it prone to the formation of lithium dendrite, which may cause short circuit especially when large current is applied. Another commercial anode material Li4Ti5O12, which also undergoes an intercalation reaction during lithiation process, has a theoretical specific capacity of 175 mAh.g(-1) along with three lithium-ion intercalations per formula unit. This is relatively small, and it has a relatively high working potential of 1.55 V (vs Li+/Li), which reduces its output voltage and specific energy when assembled in full battery. To overcome the shortcomings mentioned above, it is essential to search for new anode materials that are low-cost, environment-friendly, and easy to synthesize. Silicate materials have gained widespread attention owing to their low cost and facile synthesis. Herein, we report for the first time a novel titanosilicate, NaTiSi2O6, synthesized by sol-gel and solid sintering. It is isostructural to pyroxene jadeite NaAlSi2O6, belonging to monoclinic crystal system with a space group of C2/c. By in situ pyrolysis and carbonization of glucose, nanosized NaTiSi2O6 mixed with carbon was successfully obtained with a specific surface area of 132 m(2) g(-1), calculated according to the Brunauer-Emmett-Teller formula. The specific charge/discharge capacity in the first cycle at current density of 0.1 Ag-1 is 266.6 mAh.g(-1) and 542.9 mAh.g(-1), respectively, with an initial coulombic efficiency of 49.1%. After 100 cycles, it retains a specific charge capacity of 224.1 mAh.g(-1), corresponding to a capacity retention rate of 84.1%. The average working potential of NaTiSi2O6 is 1.2-1.3 V (vs Li+/Li), slightly lower than that of Li4Ti5O12. The reaction mechanism while charging and discharging was determined by in situ X-ray diffraction test as well as selected area electron diffraction. The results showed that NaTiSi2O6 undergoes an intercalation reaction during lithiation process, with two lithium-ion intercalations per formula unit. This makes NaTiSi2O6 a new member of the silicate anode material family, and may provide insights into the development of new silicate electrode materials in the future.
Li2TiSiO5 and Expanded Graphite Nanocomposite Anode Material with Improved Rate Performance for Lithium-Ion Batteries

Jingyuan Liu,Yao Liu,Mengyan Hou,Yonggang Wang,Congxiao Wang,Yongyao Xia

DOI: https://doi.org/10.1016/j.electacta.2017.12.019

IF: 6.6

2017-01-01

Electrochimica Acta

Abstract:Li2TiSiO5 presents an operational potential at 0.28 V vs. Li+/Li, which could fill the voltage gap between graphite and Li4Ti5O12, showing great potential as an alternative anode material for Li-ion batteries. Apart from its advantages such as proper operational potential, excellent reversibility, low cost, environment friendly and so on, Li2TiSiO5 also suffers from two shortages of relatively low rate performance and capacity-voltage curve changing during cycling. In this work, we introduced expanded graphite as supporting medium, and successfully synthesized Li2TiSiO5 nanoparticles loaded expanded graphite composites (LTSO-EG). By dramatically reducing particle size and improving electronic conducting material, the rate performance of LTSO-EG is greatly improved compared with the amorphous carbon coated Li2TiSiO5. And most importantly, LTSO-EG displays a slope and stable capacity-voltage curve during cycling with reduced polarization. (C) 2017 Elsevier Ltd. All rights reserved.
Titanium Monoxide-Stabilized Silicon Nanoparticles with a Litchi-like Structure as an Advanced Anode for Li-ion Batteries

Jing Hu,Qi Wang,Liang Fu,Ranjusha Rajagopalan,Yan Cui,Hong Chen,Hongyan Yuan,Yougen Tang,Haiyan Wang

DOI: https://doi.org/10.1021/acsami.0c10418

2020-10-14

Abstract:Silicon (Si) has been considered as the most potential anode material for next-generation high-energy density lithium-ion batteries (LIBs) because of its extremely high theoretical capacity. However, the performance deterioration caused by volume change and low electrical conductivity of active Si particles greatly limit its commercial use. Here, we designed a nonstoichiometric TiOx-coated Si anode with a litchi-like structure, in which Si–Ti and Si–O dual bonds are expected to form between the Si core and TiOx shell. This unique structure plays a major role in preventing the volume expansion and improving the electrical conductivity of the Si anode. The as-prepared TiOx-coated Si anode could exhibit excellent cycling stability after 1000 cycles at 1000 mA g–1 with a relatively small capacity decay rate of ∼0.04% per cycle, which can be comparable to most of the modified Si anodes in references. This strategy of surface regulating on the Si anode could be extended to other electrodes with large volume expansion during cycling in LIBs for achieving competitive electrochemical properties.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c10418?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c10418</a>.Phases of different titanium oxides; SEM, TEM, HAADF STEM, and HRTEM images; XPS spectrum of pristine Si particles; CV curves of different samples; initial capacities and initial Coulombic efficiencies; galvanostatic discharge/charge curves; prolonged cycle life and Coulombic efficiencies; reversible capacity values; fitting data of impedance parameters; cycling performance data of recent literatures and the present work; and FT-IR spectra (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10418/suppl_file/am0c10418_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology
Scalable Synthesis of SiO x -TiON Composite As an Ultrastable Anode for Li-Ion Half/Full Batteries

Xiuhuan Huang,Guoyong Lai,Xiujuan Wei,Jingxi Liang,Shuxing Wu,Kai-Hang Ye,Chao Chen,Zhan Lin

DOI: https://doi.org/10.1021/acsami.4c03250

IF: 9.5

2024-05-13

ACS Applied Materials & Interfaces

Abstract:Among various anode materials, SiO(x) is regarded as the next generation of promising anode due to its advantages of high theoretical capacity with 2680 mA h g^(-1), low lithium voltage platform, and rich natural resources. However, the pure SiO(x)-based materials have slow lithium storage kinetics attributed to their low electron/ion conductive properties and the large volume change during lithiation/delithiation, restricting their practical application. Optimizing the SiO(x) material...

materials science, multidisciplinary,nanoscience & nanotechnology
TiO2@LiTi2(PO4)3 enabling fast and stable lithium storage for high voltage aqueous lithium-ion batteries

Xu Hou,Xiaokang Ju,Wenguang Zhao,Jun Wang,Xin He,Leilei Du,Bo Yan,Jinke Li,Elie Paillard,Jingyu Sun,Hai Lin,Martin Winter,Jie Li

DOI: https://doi.org/10.1016/j.jpowsour.2020.229255

IF: 9.2

2021-02-01

Journal of Power Sources

Abstract:Anatase TiO2 is recognized as a promising negative electrode material when employing “water-in-salt” electrolytes in high voltage aqueous lithium-ion batteries. However, the catalytic property of water splitting aggravates the hydrogen evolution reaction, which hinders the formation of a stable solid electrolyte interphase (SEI) on the electrode surface and therefore results in poor cycling performance. To address this issue, nanostructured anatase TiO2 with amorphous LiTi2(PO4)3 as an artificial SEI coating layer is introduced. Amorphous LiTi2(PO4)3 layer enhances the ionic conductivity of TiO2, suppresses side reactions between electrode and electrolyte, and enables the formation of an effective SEI layer during the cycling. Thus, the TiO2@LiTi2(PO4)3 composite shows low polarization and high interface stability in an aqueous lithium-ion battery. As a result, a full cell LiMn2O4 |21 mol kg– 1 LiTFSI in water |TiO2@LiTi2(PO4)3 demonstrates a high rate capability (60 mAh g−1 at 20 C) and a good cycling stability (capacity decay of 0.24% per cycle within 100 cycles). Systemic studies prove that TiO2@LiTi2(PO4)3 nanocomposite is an ideal negative electrode material candidate with low redox potential and high capacity for high voltage aqueous lithium-ion batteries.

energy & fuels,materials science, multidisciplinary,electrochemistry,chemistry, physical
In Situ Synthesis of Porous Plate‐Like Li4Ti5O12 Lithium‐Ion Battery Anode with Advanced Li+ Storage Mechanism and Enhanced Electrochemical Kinetics

Jin Zhang,Qi Feng,Weijie Cheng,Lifeng Zhang,Jianfeng Huang,Yong Wang,Xingang Kong

DOI: https://doi.org/10.1002/adsu.202300243

IF: 6.737

2023-08-23

Advanced Sustainable Systems

Abstract:In this work, the porous plate‐like Li4Ti5O12 is prepared by an economical and simple method. This advanced microstructure not only enhances its Li+ storage performance by forming lithium storage model of pseudocapacitance and intercalation reaction, but also promotes its electrochemical reaction kinetics performance, thus the enhanced electrochemical performance of is Li4Ti5O12 achieved. Spinel Li4Ti5O12 as the anode material for lithium‐ion batteries possessed "zero strain" characteristics, high safety, good stability, rapid Li+ diffusion rate, and fast charging and discharging performance, and has been used commercially. In this work, a porous plate‐like structure for Li4Ti5O12 is constructed via an economic in situ topological reaction with H1.07Ti1.73O4·H2O as the precursor. In terms of Li+ storage, not only the typical intercalation reaction of Li4Ti5O12 can be fully carried out, but also the Li+ storage in the form of pseudocapacitance can be introduced due to its porous structure, thus the enhanced Li+ storage mechanism can be realized and the reversible capacity in the work (197 mAh g−1 at 0.1 A g−1) break the bottleneck of 175 mAh g−1 for Li4Ti5O12. In terms of electrochemical reaction kinetics, its plate‐like shape effectively avoids agglomeration of particles reducing the charge transfer resistance, and the micropores increase the diffusion rate of Li+ (3.3 times faster than the commercial Li4Ti5O12 nanoparticles). During the practical test, it can maintain the reversible capacity of 134 mAh g−1 after 1000 cycles at the huge current density of 1.0 A g−1 and show good compatibility with commercial LiFePO4 cathode, which proves its great practical potential for LIBs.

materials science, multidisciplinary,green & sustainable science & technology
Fabrication of hollow TiO2 nanospheres for high-capacity and long-life lithium storage

Mengzhao Ding,Lijie Cao,Xuelong Miao,Tian Sang,Chaomin Zhang,Yunxia Ping

DOI: https://doi.org/10.1007/s11581-021-04098-7

IF: 2.961

2021-05-25

Ionics

Abstract:Titanium dioxide (TiO2) is of great interest as anode material for lithium-ion batteries (LIBs) because of its safety, structure stability, and low cost. However, the limitations of low conductivity and small theoretical capacity prevent its further applications. Herein, TiO2 nanospheres with a hollow structure (H-TiO2) were successfully synthesized via a hard-template method. The resultant material used as LIBs anode with superior lithium storage properties in terms of high initial capacity (∼289 mA h g−1 at 0.1 A g−1), good rate capability (∼101 mA h g−1 at 2 A g−1), and excellent cycling stability (∼196 mA h g−1 was retained over 300 cycles at 0.1 A g−1). The improved performances are attributed to the large specific area (~225 m2 g−1) and abundant mesoporous of the hollow structure, which can not only promote the diffusion of Li+ and e− but also achieve an increase in the contact area between electrodes and electrolyte.

chemistry, physical,physics, condensed matter,electrochemistry
Ti-based Compounds As Anode Materials for Li-ion Batteries

Guannan Zhu,Yonggang Wang,Yongyao Xia

DOI: https://doi.org/10.1039/c2ee03410g

IF: 32.5

2012-01-01

Energy & Environmental Science

Abstract:Li-ion batteries are one of the most promising electrochemical power sources to be widely used in portable electronics, electric vehicles, and stationary energy storage systems. Ti-based materials have been intensively investigated as important anodes for Li-ion batteries due to their high safety and excellent cycling stability. The present work reviews the latest advances in the exploration and development of Ti-based compounds, such as Li4Ti5O12, Li2Ti3O7, TiO2-B and H2Ti3O7, as high performance anode materials for Li-ion batteries. The relationship between the preparation, composition, structure, morphology and electrochemical performance are summarized and analyzed. Further, the related advancements and challenges in practical energy applications are discussed.
Lithium lanthanum titanate perovskite as an anode for lithium ion batteries

Lu Zhang,Xiaohua Zhang,Guiying Tian,Qinghua Zhang,Michael Knapp,Helmut Ehrenberg,Gang Chen,Zexiang Shen,Guochun Yang,Lin Gu,Fei Du

DOI: https://doi.org/10.1038/s41467-020-17233-1

2020-07-13

Abstract:Conventional lithium-ion batteries embrace graphite anodes which operate at potential as low as metallic lithium, subjected to poor rate capability and safety issues. Among possible alternatives, oxides based on titanium redox couple, such as spinel Li4Ti5O12, have received renewed attention. Here we further expand the horizon to include a perovskite structured titanate La0.5Li0.5TiO3 into this promising family of anode materials. With average potential of around 1.0 V vs. Li+/Li, this anode exhibits high specific capacity of 225 mA h g-1 and sustains 3000 cycles involving a reversible phase transition. Without decrease the particle size from micro to nano scale, its rate performance has exceeded the nanostructured Li4Ti5O12. Further characterizations and calculations reveal that pseudocapacitance dictates the lithium storage process and the favorable ion and electronic transport is responsible for the rate enhancement. Our findings provide fresh impetus to the identification and development of titanium-based anode materials with desired electrochemical properties.
Fabrication of Dual-Modified Carbon Network Enabling Improved Electronic and Ionic Conductivities for Fast and Durable Li2TiSiO5 Anodes

Liming Jin,Ruiqi Gong,Junsheng Zheng,Cunman Zhang,Yongyao Xia,Jim P. Zheng

DOI: https://doi.org/10.1002/celc.201900169

IF: 4

2019-01-01

ChemElectroChem

Abstract:Li2TiSiO5 was recently proposed as a Ti-based anode material for lithium-ion batteries (LIBs), with the desirable characteristics of low discharge potential and relatively high specific capacity. However, the intrinsically poor electronic and ionic conductivities give rise to its sluggish electrochemical performance. In this work, Li2TiSiO5 modified with a dual-carbon network (C@LTSO/CNT) is developed by performing a facile synthesis. The obtained dual-carbon network coupled with small-sized LTSO particles delivers enhanced electron conductivity frameworks, abundant active interfaces, and a notably higher inner porosity for multidirectional ion diffusion. Such a unique architecture leads to a high specific capacity as well as an ultrafast electrochemical process for LTSO through remarkable electronic and ionic transfer. C@LTSO/CNT electrodes with a low discharge plateau at 0.28 V achieve an extremely competitive specific capacity of over 430 mAh g(-1) at 0.5 C, a superb high-rate performance over 125 mAh g(-1) up to 10 C, and a stable cycle lifespan of 1500 cycles without any degradation, displaying significant potential as an ideal anode candidate. Thus, a high-performance LIB full cell is fabricated with a C@LTSO/CNT anode and a LiFePO4 cathode. This cell shows an energy density of 200 Wh kg(-1) with greatly improved properties of high-power density and pronounced cycling stability.
A Solid Electrolyte Based on Electrochemical Active Li4Ti5O12 with PVDF for Solid State Lithium Metal Battery

Qi Zhou,Xiaoyan Yang,Xiaosong Xiong,Qianyu Zhang,Bohao Peng,Yuhui Chen,Zhaogen Wang,Lijun Fu,Yuping Wu

DOI: https://doi.org/10.1002/aenm.202201991

IF: 27.8

2022-01-01

Advanced Energy Materials

Abstract:In parallel with researches unveiling the nature and mechanism in solid state battery, numbers of investigations have been pursuing methods to stabilize their performance as well as to reduce the cost. Simple preparation and earth-abundant ingredients are preconditions for a solid state electrolyte to be suitable for scalable production. In this work, a commercial anode active material, spinel Li4Ti5O12, is introduced for the first time, which has high ionic conductivity to sustain high rate charge/discharge with considerable high performance/cost ratio, into poly(vinylidene fluoride) to achieve a composite solid electrolyte. The membrane solid electrolyte containing 80 wt% of the Li4Ti5O12 (LTO-8) shows outstanding ionic conductivity of 2.87 x 10(-4) S cm(-1) at 35 degrees C and inhibits electronic conductive network. The self-sacrificed interface contributes to the stabilized performance of the composite. Li||LiFePO4 cells with LTO-8 present a discharge specific capacity of 150 mAh g(-1) at 0.5C and a considerable average specific capacity of 119 mAh g(-1) under 5C in 400 cycles, demonstrating its excellent working performance. This investigation provides promising application of Li4Ti5O12 for solid state electrolytes, which is superior to the reported solid state electrolytes in comprehensive performance, and surely paves another commercial way to solid state batteries.
KxNayH(2‐x‐y)Ti2O5 for High‐Performance Lithium‐Ion Battery Anode with Li Dendrites‐Free Mechanism, Zero‐Strain Characteristic

Chaohui Yuan,Miao Wang,Junjun Wang,Wentian Chen,Na Li,Yuqian Fan,Zhipeng Ma,Wenfeng Guo,Liqiang Mai

DOI: https://doi.org/10.1002/aenm.202302015

IF: 27.8

2023-09-26

Advanced Energy Materials

Abstract:KxNayH(2‐x‐y)Ti2O5 for high‐performance lithium‐ion battery anodes exhibits enhanced specific capacity (323 mAh g−1), lower working potential (major capacity contribution < 1.5 V vs Li+/Li), higher diffusion coefficient (10−8.5–10−5 cm2 s−1) and long cycle stability. In/ex situ studies reveal its unique "switching mechanism" to avoid lithium dendrite generation and zero‐strain properties. Conventional Li‐ion batteries equipped with graphite anodes suffer from poor rate performance and the risk of lithium dendrites, which constrain scale‐up applications. Among the promising candidates, spinel‐type Li4Ti5O12 is still subjected to low theoretical specific capacity, high working potential, and poor diffusion properties. Herein the KxNayH(2‐x‐y)Ti2O5 product is provided by reconstructing the chemical bonding idea, which exhibits enhanced specific capacity (323 mAh g−1), lower working potential (major capacity contribution < 1.5 V vs Li+/Li), higher diffusion coefficient (10−8.5–10−5 cm2 s−1), and long cycle stability. Further in/ex situ studies show that these excellent properties can be attributed to the combination of high capacitive contribution, unique "switching mechanism" to avoid lithium dendrite generation, and the zero‐strain properties. The findings provide new ideas and opportunities for the development of next generation titanate anode materials with desirable electrochemical properties.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
TiO2 (B) anode for high-voltage aqueous Li-ion batteries

Anxing Zhou,Yuan Liu,Xiangzhen Zhu,Xinyan Li,Jinming Yue,Xianguo Ma,Lin Gu,Yong-Sheng Hu,Hong Li,Xuejie Huang,Liquan Chen,Liumin Suo

DOI: https://doi.org/10.1016/j.ensm.2021.07.046

IF: 20.4

2021-11-01

Energy Storage Materials

Abstract:Aqueous Li-ion batteries (ALIBs) are regarded as promising large-scale energy storage technology because of their intrinsic safety and cost-effectiveness. However, because of the “cathodic challenge” encountered using aqueous electrolytes, the choice of anode material is restricted to candidates having relatively high redox potential and low capacity, thus resulting in low energy density. In this communication, we report a TiO2 B anode for ALIBs that has low lithiation potential (∼1.6 V in nonaqueous electrolytes and ∼1.8 V in aqueous electrolytes), high capacity (∼200 mAh/g), and high structural stability. When the TiO2 B anode is paired with spinel LiMn2O4, the LiMn2O4//TiO2 B full cell can deliver high capacity (194.5 mAh/g, based on the anode mass) and high energy density (150 Wh/kg, based on the total electrode mass). Furthermore, a full cell employing this anode displays superior cycling performance with a high capacity retention of 76% after 400 cycles at 1 C, this is attributed to the structural stability of the TiO2 B nanowires and the wide electrochemical stability window of the Water-in-Salt (WIS) electrolyte. It is anticipated that the TiO2 B anode can provide a new option for constructing high-energy ALIBs.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology

Li<sub>2</sub>TiSiO<sub>5</sub>: a low potential and large capacity Ti-based anode material for Li-ion batteries

Li2TiSiO5: a low potential and large capacity Ti-based anode material for Li-ion batteries

Li Storage in a Low Intercalation Potential Li 2 TiSiO 5

A Low-Voltage Layered Na2 TiGeO5 Anode for Lithium-Ion Battery.

Polyanion-Type Anode Material for Lithium-Ion Batteries

TiO 2 Nanocrystal‐Framed Li 2 TiSiO 5 Platelets for Low‐Voltage Lithium Battery Anode

SiO@C/TiO2 nanospheres with dual stabilized architecture as anode material for high-performance Li-ion battery

A Low‐Voltage Layered Na 2 TiGeO 5 Anode for Lithium‐Ion Battery

NaTiSi<sub>2</sub>O<sub>6</sub>/C Composite as a Novel Anode Material for Lithium-Ion Batteries

Li2TiSiO5 and Expanded Graphite Nanocomposite Anode Material with Improved Rate Performance for Lithium-Ion Batteries

Titanium Monoxide-Stabilized Silicon Nanoparticles with a Litchi-like Structure as an Advanced Anode for Li-ion Batteries

Scalable Synthesis of SiO x -TiON Composite As an Ultrastable Anode for Li-Ion Half/Full Batteries

TiO2@LiTi2(PO4)3 enabling fast and stable lithium storage for high voltage aqueous lithium-ion batteries

In Situ Synthesis of Porous Plate‐Like Li4Ti5O12 Lithium‐Ion Battery Anode with Advanced Li+ Storage Mechanism and Enhanced Electrochemical Kinetics

Fabrication of hollow TiO2 nanospheres for high-capacity and long-life lithium storage

Ti-based Compounds As Anode Materials for Li-ion Batteries

Lithium lanthanum titanate perovskite as an anode for lithium ion batteries

Fabrication of Dual-Modified Carbon Network Enabling Improved Electronic and Ionic Conductivities for Fast and Durable Li2TiSiO5 Anodes

A Solid Electrolyte Based on Electrochemical Active Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub> with PVDF for Solid State Lithium Metal Battery

KxNayH(2‐x‐y)Ti2O5 for High‐Performance Lithium‐Ion Battery Anode with Li Dendrites‐Free Mechanism, Zero‐Strain Characteristic

TiO2 (B) anode for high-voltage aqueous Li-ion batteries