High-throughput computational screening of 137953 metal–organic frameworks for membrane separation of a CO2/N2/CH4 mixture

Zhiwei Qiao,Chunwang Peng,Jian Zhou,Jianwen Jiang

DOI: https://doi.org/10.1039/c6ta06262h

IF: 11.9

2016-01-01

Journal of Materials Chemistry A

Abstract:A computational study is reported to high-throughput screen 137953 MOFs for a single-step membrane separation of a CO2/N2/CH4 mixture.

What problem does this paper attempt to address?

Flexible molecular sieving of C2H2 from CO2 by a new cost-effective metal organic framework with intrinsic hydrogen bonds

Wan-Qi Sun,Jian-Bo Hu,Yun-Jia Jiang,Nuo Xu,Ling-Yao Wang,Jia-Hao Li,Yong-Qi Hu,Simon Duttwyler,Yuan-Bin Zhang

DOI: https://doi.org/10.1016/j.cej.2022.135745

IF: 15.1

2022-01-01

Chemical Engineering Journal

Abstract:The separation of C2H2/CO2 is an important process in industry but challenged by the trade-off of capacity and selectivity owning to their close physical properties and identical kinetic molecular size. Herein, we reported a new metal organic framework ZNU-3 (ZNU = Zhejiang Normal University) with flexibility controlled by abundant hydrogen-bonds for highly selective molecular sieving of C2H2 from CO2, CH4, C2H4 and C2H6 using commercially available cost-effective ligands. At 1.0 bar and 298 K, the uptake capacity of C2H2 is 81.0 cm(3) (STP) g(-1), while the CO2, C2H4, C2H6, CH4, N-2 uptake capacities are only 5.4, 5.3, 1.0, 1.1, 1.1 cm(3) (STP) respectively. Such high uptake ratios of C2H2 over other C2 and C1 gases have rarely been achieved. Particularly, the C2H2/CO2 uptake ratio of 14.9 is only secondary to that of the benchmark UTSA-300a and much higher than those of all other porous materials. Dynamic breakthrough experiments with equimolar C2H2/CO2 mixtures showed that the retaining time of C2H2 is nearly 2 fold of that of CO2, indicating the excellent practical separation performance of ZNU-3 for C2H2/CO2 mixtures. Modeling studies indicated that C2H2 is mainly trapped by two opposite carboxylic groups with additional small contribution from pi center dot center dot center dot pi packing between pyridine ring and planar C C moiety.
Computational Study on Adsorption and Separation of H2/CH4/CO2 in Double-Walled Metal-Dipyrazole Frameworks

Xiao-Dong Li,Yan-Yu Xie,Peng-hui Yang,Xiao-Yu Huang,Xiu-Ying Liu

DOI: https://doi.org/10.1016/j.mtcomm.2024.111228

IF: 3.8

2024-01-01

Materials Today Communications

Abstract:The density functional theory (DFT) and molecular simulation techniques were employed to comprehensively study the structural characteristics and adsorption and separation properties of H2/CH4/CO2 in six novel double-walled dipyrazole metal-organic frameworks (MOFs), BUT-53 to BUT-58 (BUT: Beijing University of Technology). The six new MOFs were characterized using numerical Monte Carlo methods, based on crystal structures optimized through DFT calculations. The results reveal that six MOFs exhibit large specific surface area (1068 – 1780 cm2·g-1), high porosity (0.27 – 0.44 cm3·g-1), and suitable pore size (4.34 – 8.15Å), which are advantageous for gas adsorption and separation. Grand canonical Monte Carlo (GCMC) simulation was implemented to study gas adsorption and separation properties at both 77 and 298K. The simulation results demonstrate that BUT-57 possesses the highest storage capacity for pure component gas, while BUT-53 owns the best separation properties for binary mixture gases. Meanwhile, we propose an approach to enhance the selectivity for CO2 by augmenting the availability of nitrogen sites in porous MOFs, thereby offering some insights for related experimental investigations.
Computational screening of metal–organic frameworks for separation of CO2 and N2 from wet flue gas

Chengxin Ji,Kang Zhang

DOI: https://doi.org/10.1007/s10853-024-09744-9

IF: 4.5

2024-05-18

Journal of Materials Science

Abstract:In response to the challenging task of effecting CO 2 and N 2 adsorption separation under humid gas conditions, this study employs a methodology that integrates molecular simulation with high-throughput screening. The focus is on investigating the adsorption separation of a ternary mixture (CO 2 /N 2 /H 2 O) utilizing the most recent experimental synthesis of metal–organic frameworks (MOFs) from the CoRE-MOF-2019 database. To circumvent the competitive adsorption of water vapor, materials with excessive hydrophilicity are systematically excluded. Subsequently, a univariate analysis is conducted on the remaining 1343 MOFs, exploring the intricate relationships between key structural parameters such as pore limiting diameter, maximum pore cavity diameter of free channels (LCD), pore volume ( V pore ), volume surface area (VSA), weight surface area, density ( ρ ), porosity ( φ ), Henry coefficient ( K ), adsorption heat ( ), and metal types. The investigation reveals positive correlations between ρ , K , and with selectivity, while other descriptors exhibit negative correlations. Notably, MOFs enriched with Cd and Cu demonstrate superior performance. Subsequent analysis employs Pearson coefficients and a decision tree model to rank descriptors and identify the top three descriptors (LCD, VSA, and ) influencing performance. Utilizing these descriptors, the decision tree model delineates optimal design criteria: > 28.296 kJ mol −1 , LCD 727.596 m 2 cm −3 . To predict the performance of MOFs that have not yet been synthesized or experimentally validated, we employed the nine descriptors for model training and out-of-sample validation. The decision tree classifier exhibits high prediction accuracy and shows excellent transferability, effectively delineating the boundaries between different performance classes by capturing structural–selectivity correlations. This process culminates in the screening of 15 optimal MOFs, offering theoretical insights for the adsorption separation of CO 2 in humid flue gas.

materials science, multidisciplinary
High-Throughput Screening of Metal–Organic Frameworks Assisted by Machine Learning: Propane/Propylene Separation

Xiaoyu Xue,Min Cheng,Shihui Wang,Shaochen Chen,Li Zhou,Chong Liu,Xu Ji

DOI: https://doi.org/10.1021/acs.iecr.2c02374

2023-01-06

Industrial & Engineering Chemistry Research

Abstract:The separation of a propane (C3H8)/propylene(C3H6) mixture is of paramount importance in the petrochemical industry. Metal–organic frameworks (MOFs), as a class of promising alternative to the traditional adsorbents, have garnered extensive interest. This study proposes a machine learning-assisted high-throughput screening strategy for the identification of suitable MOFs for C3H8/C3H6 separation, striving to accelerate the discovery of high-performance MOF candidates for this particular application. First, a chemical/geometric analysis-based prescreening is applied to a data set of 146 203 MOFs composed of an experimentally synthesized MOF database and a hypothetical MOF database, and MOFs with undesirable chemical/geometric features were excluded. Six structural and nine chemical descriptors were calculated for the remaining MOFs. Random Forest regression algorithm was applied to “learn” the relationship correlations between the features (chemical and/or structural) of MOFs and their C3H8/C3H6 separation capacity. Grand Canonical Monte Carlo (GCMC) simulations were applied to evaluate the C3H8/C3H6 separation performances of the randomly selected training and testing MOF samples. A performance prediction model based on chemical and structural descriptors was obtained with R 2 equal to 0.96, which was employed for a separation performance prediction of the remaining MOFs. 2500 MOFs with potential to possess high C3H8/C3H6 separation performance were shortlisted by the prediction model. GCMC simulations were applied to calibrate the prediction results and validate of the machine learning model. MOFs with competitively high C3H8/C3H6 separation potential and regenerability were identified, and a comparison with MOFs reported in the literature was made, indicating that the proposed machine learning-assisted high-throughput screening approach is efficient and effective. Furthermore, structure–property correlation analysis was conducted.

engineering, chemical
Machine-Learning-Assisted High-Throughput computational screening of Metal–Organic framework membranes for hydrogen separation

Xiangning Bai,Zenan Shi,Huan Xia,Shuhua Li,Zili Liu,Hong Liang,Zhiting Liu,Bangfen Wang,Zhiwei Qiao

DOI: https://doi.org/10.1016/j.cej.2022.136783

IF: 15.1

2022-10-15

Chemical Engineering Journal

Abstract:The high-throughput computational screening (HTCS) and machine learning (ML) were applied to evaluate the H2 separation performances of computation-ready, experimental metal–organic framework membranes (CoRE-MOFMs). For the separation of H2/X (X = CH4, N2, H2S, O2, CO2, and He), based on the results of the structure-performance relationships by univariate analysis found that the performance of the top-performing candidates far exceeded Robeson’s upper bound. To evaluate the H2 permeability (PH2) and permselectivity, a new trade-off variable, the trade-off multiple selectivity and permeability (TMSP), was defined as the comprehensive performance of the CoRE-MOFMs. The TMSP could effectively evaluate the separation performance of CoRE-MOFMs for a variety of H2/X pairs at inifinite dilution. Eight ML methods based on supervised learning algorithms were employed to predict PH2 and TMSP, and the Gaussian process regression and random forest methods exhibited the first and second highest predictive abilities, respectively. Calculating the feature importance of each CoRE-MOFM to investigate the relationship between the number of features and the accuracy of the ML model. And a decision tree model was established following the principle of the minimum Gini coefficient, which would be accurately classified the CoRE-MOFMs based on the membrane structural descriptors; the optimal structural descriptors of MOF and the physical properties of the gas to be separated are used to establish a multivariate regression model which can predict the value of the optimal structural descriptors of MOFMs by knowing the physical properties of component X in the other H2/X separation. The quantitative structure-performance relationships on the microscopic scale could provide a theoretical basis for the screening of top-performing CoRE-MOFMs. The HTCS and ML methods could efficiently accelerate the design and the development of top-performing CoRE-MOFMs for H2 separation.

engineering, chemical, environmental
High-throughput screening and evaluation of double-linker metal-organic frameworks for CO 2 /H 2 adsorption and separation

Huang Ji-Long,Liu Xiu-Ying,Chen Hao,Li Xiao-Dong,Yu Jing-Xin

DOI: https://doi.org/10.1088/1674-1056/ad925a

2024-11-24

Chinese Physics B

Abstract:The CO 2 capture from CO 2 /H 2 gas mixtures in syngas is a crucial issue for hydrogen production from steam methane reforming in industry, as the presence of CO 2 directly affects the purity of H 2 . A combination of high-throughput screening method and grand canonical Monte Carlo simulation was utilized to evaluate and screen 1725 metal-organic frameworks in detail as a means of determining their adsorption performance for CO 2 /H 2 gas mixtures. The adsorption and separation performance of double-linker MOFs was comprehensively evaluated using eight evaluation indicators, namely the largest cavity diameter, accessible surface area, pore occupied accessible volume, porosity, adsorption selectivity, working capacity, adsorbent performance score and percent regeneration, thus the six optimal performance frameworks were screened for further studying their single-component adsorption and binary competitive adsorption of CO 2 /H 2 , respectively. The CO 2 adsorption selectivity at different CO 2 /H 2 feed ratios was also evaluated, which indicated their excellent adsorption and separation performance. The microscopic adsorption mechanism for CO 2 and H 2 at the molecular level were investigated by analyzing the radial distribution function and density distribution. This study may provide directional guidance and reference for subsequent experiments on the adsorption and separation of CO 2 /H 2 .

physics, multidisciplinary
Metal–organic framework channelled graphene composite membranes for H2/CO2separation

Wanbin Li,Yufan Zhang,Pengcheng Su,Zehai Xu,Guoliang Zhang,Chong Shen,Qin Meng

DOI: https://doi.org/10.1039/c6ta09362k

IF: 11.9

2016-01-01

Journal of Materials Chemistry A

Abstract:MOF nanosheets werein situcrystallized between rGO to form composite membranes with excellent H2/CO2separation performance.
Large-Scale Screening and Machine Learning for Metal–Organic Framework Membranes to Capture CO2 from Flue Gas

Yizhen Situ,Xueying Yuan,Xiangning Bai,Shuhua Li,Hong Liang,Xin Zhu,Bangfen Wang,Zhiwei Qiao

DOI: https://doi.org/10.3390/membranes12070700

IF: 4.562

2022-07-12

Membranes

Abstract:To combat global warming, as an energy-saving technology, membrane separation can be applied to capture CO2 from flue gas. Metal–organic frameworks (MOFs) with characteristics like high porosity have great potential as membrane materials for gas mixture separation. In this work, through a combination of grand canonical Monte Carlo and molecular dynamics simulations, the permeability of three gases (CO2, N2, and O2) was calculated and estimated in 6013 computation–ready experimental MOF membranes (CoRE–MOFMs). Then, the relationship between structural descriptors and permeance performance, and the importance of available permeance area to permeance performance of gas molecules with smaller kinetic diameters were found by univariate analysis. Furthermore, comparing the prediction accuracy of seven classification machine learning algorithms, XGBoost was selected to analyze the order of importance of six structural descriptors to permeance performance, through which the conclusion of the univariate analysis was demonstrated one more time. Finally, seven promising CoRE-MOFMs were selected, and their structural characteristics were analyzed. This work provides explicit directions and powerful guidelines to experimenters to accelerate the research on membrane separation for the purification of flue gas.

engineering, chemical,materials science, multidisciplinary,polymer science,chemistry, physical
Screening and design of COF-based mixed-matrix membrane for CH4/N2 separation

Tongan Yan,Dahuan Liu,Qingyuan Yang,Chongli Zhong

DOI: https://doi.org/10.1016/j.cjche.2021.09.003

IF: 3.8

2022-02-01

Chinese Journal of Chemical Engineering

Abstract:Membrane separation is a high-efficiency, energy-saving, and environment-friendly separation technology. Covalent organic framework (COF)-based mixed-matrix membranes (MMMs) have broad application prospects in gas separation and are expected to provide new solutions for coal-bed methane purification. Herein, a high-throughput screening method is used to calculate and evaluate COF-based MMMs for CH4/N2 separation. General design rules are proposed from thermodynamic and kinetic points of view using the computation-ready, experimental COFs. From our database containing 471,671 generated COFs, 5 COF membrane materials were screened with excellent membrane selectivities, which were then used as the filler of MMMs for separation performance evaluation. Among them, BAR-NAP-Benzene_CF3 combined with polydimethylsiloxane and styrene-b-butadiene-b-styrene show high CH4 permeability of 4.43 × 10−13 mol·m·s−1·Pa−1·m−2 and high CH4/N2 selectivity of 9.54, respectively. The obtained results may provide reasonable information for the design of COF-based membranes for the efficient separation of CH4/N2.

engineering, chemical
Metal-Organic Framework Channelled Graphene Composite Membranes for H-2/Co2 Separation

Wanbin Li,Yufan Zhang,Pengcheng Su,Zehai Xu,Guoliang Zhang,Chong Shen,Qin Meng

DOI: https://doi.org/10.1039/c6ta09362k

IF: 11.9

2016-01-01

Journal of Materials Chemistry A

Abstract:Graphene-based materials offer great potential in gas separation. However, it remains a challenge to control the interlayer structure to obtain membranes with high permeability. We describe a route for the fabrication of metal-organic framework (MOF) channelled graphene composite membranes with molecular sieving properties by in situ crystallization. Based on polar oxygen groups, extended interlayer spacing and electronegativity, MOF nanosheets can easily be impregnated into interlayers of reduced graphene oxide (rGO), which strongly anchor and bolster up rGO by coordination bonds to form a porous architecture with uniform nanochannels. The H-2/CO2 selectivity of ZIF-8/rGO membranes reached about 26.4. Moreover, many other MOF materials were also inserted between rGO sheets to obtain membranes with both high selectivity (larger than 10.3) and superior permeability (in the range of 73-21 112 barrer).
Discovery of a Scalable Metal–Organic Framework with a Switchable Structure for Efficient CH 4 /N 2 Separation

Miao Chang,Jiahao Ren,Yan Wei,Tongan Yan,Jie-Xin Wang,Dahuan Liu,Jian-Feng Chen

DOI: https://doi.org/10.1021/acs.chemmater.3c00350

IF: 10.508

2023-05-19

Chemistry of Materials

Abstract:Discovering optimum materials to realize an efficient CH4/N2 mixture is of vital industrial significance but scientifically challenging. To solve this key obstacle, an efficient strategy from theoretical screening to scalable synthesis was thus proposed. A large-scale computational screening was first executed to identify high-performance adsorbents for CH4/N2 separation from the experimental copper metal–organic framework (Cu-MOF) libraries. A series of MOFs with kagomé-type lattice characteristics were computationally defined as candidates with good CH4/N2 selectivity. As a proof-of-concept example, one of the candidates (SIWPAS) was further prepared in an experiment. Intriguingly, the pore sizes can be precisely regulated by altering the degassing temperature to induce the dynamic switch of the initial two-dimensional (2D) framework, further enhancing the separation performance for CH4/N2. The obtained selectivity of 15.0 at 298 K and 1.0 bar is consistent with the simulation prediction value, which is also one of the highest values presently. Meanwhile, the CH4/N2 uptake ratio of 7.5 (298 K and 1.0 bar) and comprehensive separation performance index sorbent selection parameter (Ssp) of 283.0 are higher than those of all materials as yet. Significantly, the scalable continuous synthesis of this MOF was finally realized with the highest space-time yield (STY) of 18982 kg m–3 day–1 for all 2D MOFs with the aid of the process intensification approach based on high gravity technology. As a foremost finding, this work not only greatly shortens the discovery period of high-performance MOF materials but also effectively promotes their practical applications.

materials science, multidisciplinary,chemistry, physical
X-ray Diffraction and Molecular Simulations in the Study of Metal-Organic Frameworks for Membrane Gas Separation.

Dun‐Yen Kang,Jong Suk Lee,Li‐Chiang Lin

DOI: https://doi.org/10.1021/acs.langmuir.2c01317

IF: 3.9

2022-07-26

Langmuir

Abstract:For more than a decade, researchers have been developing metal-organic frameworks (MOFs) in the form of pure MOF membranes as well as MOF-containing mixed-matrix membranes. MOF membranes have been used for H2/CO2 or C3H6/C3H8 separation, but relatively few MOF membranes enable the high-performance separation of CO2/N2, CO2/CH4, or N2/CH4. This article describes the use of in situ XRD analysis and molecular simulation to elucidate gas transport within MOFs and derivative membranes at the molecular level. In a review of recent studies by the authors and other research groups, this article examines the flexibility of MOFs initiated by activation, gas adsorption, and aging effects during gas permeation. This article also discusses the application of XRD analysis in conjunction with computational methods to investigate the CO2-MOF Coulombic interaction and its effects on CO2 separation. Note that this combined analysis approach is also useful in studying the effects of linker rotation on N2/CH4 separation. This article also examines the use of computational tools in identifying new MOFs for gas separation and, more importantly, in elaborating the relationship between the structure of MOFs and their corresponding gas transport properties.

Chemistry,Engineering,Medicine,Materials Science
Transformation of Metal-Organic Frameworks for Molecular Sieving Membranes

Wanbin Li,Yufan Zhang,Congyang Zhang,Qin Meng,Zehai Xu,Pengcheng Su,Qingbiao Li,Chong Shen,Zheng Fan,Lei Qin,Guoliang Zhang

DOI: https://doi.org/10.1038/ncomms11315

IF: 16.6

2016-01-01

Nature Communications

Abstract:The development of simple, versatile strategies for the synthesis of metal-organic framework (MOF)-derived membranes are of increasing scientific interest, but challenges exist in understanding suitable fabrication mechanisms. Here we report a route for the complete transformation of a series of MOF membranes and particles, based on multivalent cation substitution. Through our approach, the effective pore size can be reduced through the immobilization of metal salt residues in the cavities, and appropriate MOF crystal facets can be exposed, to achieve competitive molecular sieving capabilities. The method can also be used more generally for the synthesis of a variety of MOF membranes and particles. Importantly, we design and synthesize promising MOF membranes candidates that are hard to achieve through conventional methods. For example, our CuBTC/MIL-100 membrane exhibits 89, 171, 241 and 336 times higher H2 permeance than that of CO2, O2, N2 and CH4, respectively.
High-Throughput Virtual Screening of Biometal–Organic Frameworks for O 2 /N 2 Separation

Songyang He,Min Cheng,Chong Liu,Zhiwei Zhao,Shiyang Chai,Li Zhou,Xu Ji

DOI: https://doi.org/10.1021/acs.iecr.3c04185

2024-01-25

Industrial & Engineering Chemistry Research

Abstract:The separation/purification of oxygen (O2) from air is of great significance in the biomedical field. Biometal–organic frameworks (bio-MOFs), as a class of promising alternatives to traditional adsorbents, have attracted widespread interest. This paper proposes a strategy for screening high-performance bio-MOFs based on machine learning (ML) and molecular simulation methods. First, nontoxic and cost-effective bio-MOFs, namely, desired bio-MOFs, are selected from MOF databases using the binary decision tree method. Next, 15 descriptors, including nine structural descriptors and six chemical descriptors, are calculated to characterize the desired bio-MOFs. Next, the random forest (RF) algorithm is adopted to map the relationship between descriptors and the target property, where target properties are calculated by the grand canonical Monte Carlo (GCMC) results. High-throughput screening of the high-performance desired bio-MOFs is performed using the established RF model. Finally, high-performance desired bio-MOFs are obtained for O2/N2 adsorption separation, and their structure–property relationships are also analyzed.

engineering, chemical
One Scalable and Stable Metal-Organic Framework for Efficient Separation of CH 4 /N 2 Mixture

Pengtao Guo,Yunpan Ying,Dahuan Liu

DOI: https://doi.org/10.1021/acsami.3c18378

IF: 9.5

2024-02-02

ACS Applied Materials & Interfaces

Abstract:Separating CH(4) from coal bed methane is of great importance but challenging. Adsorption-based separation often suffers from low selectivity, poor stability, and difficulty to scale up. Herein, a stable and scalable metal-organic framework [MOF, CoNi(pyz-NH(2))] with multiple CH(4) binding sites was reported to efficiently separate the CH(4)/N(2) mixture. Due to its suitable pore size and multiple CH(4) binding sites, it exhibits excellent CH(4)/N(2) selectivity (16.5) and CH(4) uptake (35.9...

materials science, multidisciplinary,nanoscience & nanotechnology
Molecular Design of Metal-Organic Frameworks with Different Metal Ligands for Bio-Methane Separation

QIAO Zhiwei,YANG Rendang,WANG Haihui,ZHOU Jian

DOI: https://doi.org/10.3969/j.issn.0438-1157.2014.05.024

2014-01-01

Abstract:The adsorption and separation capabilities of metal-organic frameworks (MOFs) for CO2 and CH4 gas mixtures were studied by grand canonical Monte Carlo (GCMC) simulations. Three sub-families (M-MOF-74, M-MIL-53 and [M(atz)(bdc)0.5]) (M=Mg, Co, Ni, Zn, Al, Cr) MOFs with different metal ligands were investigated. Simulation results showed that the CO2 adsorption capability of Mg-MOF-74 exceeded the others at high pressures; both amine functionalized [Zn(atz)(bdc)0.5] and [Co(atz)(bdc)0.5] MOFs had superior CO2 separation performance at low pressures. The radial distribution functions and the overlapping snapshots of CO2 adsorption showed that in each sub-family of MOFs, different metal ligands affected their CO2 adsorption configuration and resulted in their different adsorption and separation capabilities. This work could provide some guidance for the design and development of new high performance MOFs for CO2 and CH4 separation.
Machine learning and in-silico screening of metal–organic frameworks for O2/N2 dynamic adsorption and separation

Yaling Yan,Zenan Shi,Huilin Li,Lifeng Li,Xiao Yang,Shuhua Li,Hong Liang,Zhiwei Qiao

DOI: https://doi.org/10.1016/j.cej.2021.131604

IF: 15.1

2022-01-01

Chemical Engineering Journal

Abstract:It remains a great challenge to separate O2 from N2 at room temperature. Pressure swing adsorption (PSA) technology is a potential candidate, and the development of high-efficiency adsorbents for O2/N2 separation at room temperature has attracted a great deal of interest. In this work, machine learning (ML)-assisted high-throughput computational screening (HTCS) techniques were performed to screen the dynamic adsorption of O2 and N2 in 6,013 computation-ready experimental metal–organic frameworks (CoRE-MOFs), including the competitive adsorption of O2 and the diffusion of pure N2 and O2, to identify the best materials for O2/N2 separation. First, based on HTCS, we established the relationships between the structural/energetic descriptors with the performance indicators. Three machine learning (ML) algorithms were then applied to predict the performance indicators of MOFs. In addition, the relative importance of the structural/energetic descriptors and metal center type in MOFs toward the separation performance was evaluated, indicating that the metal center type of MOFs is a key factor for the separation of O2/N2. Transition metal elements were determined to have highest importance by ML. Moreover, the 13 best MOFs were identified for the dynamic adsorption of O2 from the air. Finally, three types of design strategies could significantly improve the performance of MOFs, such as regulating the topology and alternating the metal node and organic linker. The combination of HTCS, ML, and design strategies from bottom to top provide powerful microscopic insights for the development of MOF adsorbents for the separation of O2 at room temperature.
Computational screening and design of nanoporous membranes for efficient carbon isotope separation

Jingqi Wang,Musen Zhou,Diannan Lu,Weiyang Fei,Jianzhong Wu

DOI: https://doi.org/10.1016/j.gee.2020.07.025

IF: 12.781

2020-01-01

Green Energy & Environment

Abstract:Stable isotopes have been routinely used in chemical sciences, medical treatment and agricultural research. Conventional technologies to produce high-purity isotopes entail lengthy separation processes that often suffer from low selectivity and poor energy efficiency. Recent advances in nanoporous materials open up new opportunities for more efficient isotope enrichment and separation as the pore size and local chemical environment of such materials can be engineered with atomic precision. In this work, we demonstrate the unique capability of nanoporous membranes for the separation of stable carbon isotopes by computational screening a materials database consisting of 12,478 computation-ready, experimental metal-organic frameworks (MOFs). Nanoporous materials with the highest selectivity and membrane performance scores have been identified for separation of 12CH4/13CH4 at the ambient condition (300 K). Analyzing the structural features and metal sites of the promising MOF candidates offers useful insights into membrane design to further improve the performance. An upper limit of the efficiency has been identified for the separation of 12CH4/13CH4 with the existing MOFs and those variations by replacement of the metal sites.
Data-Driven and Machine Learning to Screen Metal-Organic Frameworks for the Efficient Separation of Methane

Yafang Guan,Xiaoshan Huang,Fangyi Xu,Wenfei Wang,Huilin Li,Lingtao Gong,Yue Zhao,Shuya Guo,Hong Liang,Zhiwei Qiao

DOI: https://doi.org/10.3390/nano14131074

2024-06-24

Abstract:With the rapid growth of the economy, people are increasingly reliant on energy sources. However, in recent years, the energy crisis has gradually intensified. As a clean energy source, methane has garnered widespread attention for its development and utilization. This study employed both large-scale computational screening and machine learning to investigate the adsorption and diffusion properties of thousands of metal-organic frameworks (MOFs) in six gas binary mixtures of CH4 (H2/CH4, N2/CH4, O2/CH4, CO2/CH4, H2S/CH4, He/CH4) for methane purification. Firstly, a univariate analysis was conducted to discuss the relationships between the performance indicators of adsorbents and their characteristic descriptors. Subsequently, four machine learning methods were utilized to predict the diffusivity/selectivity of gas, with the light gradient boosting machine (LGBM) algorithm emerging as the optimal one, yielding R2 values of 0.954 for the diffusivity and 0.931 for the selectivity. Furthermore, the LGBM algorithm was combined with the SHapley Additive exPlanation (SHAP) technique to quantitatively analyze the relative importance of each MOF descriptor, revealing that the pore limiting diameter (PLD) was the most critical structural descriptor affecting molecular diffusivity. Finally, for each system of CH4 mixture, three high-performance MOFs were identified, and the commonalities among high-performance MOFs were analyzed, leading to the proposals of three design principles involving changes only to the metal centers, organic linkers, or topological structures. Thus, this work reveals microscopic insights into the separation mechanisms of CH4 from different binary mixtures in MOFs.
Research Progress of High-throughput Computational Screening of Metal-Organic Frameworks

Liu Zhilu,Li Wei,Liu Hao,Zhuang Xudong,Li Song

DOI: https://doi.org/10.6023/a18120497

2019-01-01

Acta Chimica Sinica

Abstract:During the past decades, extensive investigations on metal-organic frameworks (MOFs) with ultrahigh surface area for gas adsorption and separation have been reported. With the increasing number of possible MOFs, it has been a great challenge to discover high-performing MOFs of interest from numerous structures. High-throughput computational screening (HTCS) is a powerful tool to accelerate the development of MOFs for application of interest and explores the quantitative structure-property relationship (QSPR) to facilitate the rational design of top-performing MOFs. In this review, we summarize the MOF databases used for HTCS, mainly including MOFs collected from experimentally synthesized MOFs (i. e. eMOFs), and the hypothetical MOFs constructed by computer-aided tools (i. e. hMOFs). Moreover, there are currently two important screening strategies, molecular simulation and machine learning-based HTCS. A vast majority of HTCS have been performed by molecular simulations including grand canonical Monte Carlo (GCMC) and molecular dynamics (MD) simulations, in which the accuracy of force field parameters play a criticl role in the reliability of HTCS. GCMC is able to predict the adsorption performance of MOFs such as adsorption capacity, selectivity and heat of adsorption, whereas MD is commonly used to estimate the dynamic property of adsorbates, e. g. diffusion coefficient and permeability. Additionally, lattice GCMC and classical density functional theory (cDFT) are also highlighted for computational screening of MOFs in this review. Machine learning consisting of various algorithms is a recently developed strategy with high efficiency and low computational cost, which is a more powerful and promising technique in future. At last, the investigations on the utilization of HTCS in CH4 storage, H-2 storage, CO2 capture and gas separation were outlined. By reviewing the recent research progress in HTCS, we pointed out the current challenges and opportunities for the furture development of HTCS for MOFs, which will be the major engine for the commercialization of MOFs in various applications of interests.

High-throughput computational screening of 137953 metal–organic frameworks for membrane separation of a CO<sub>2</sub>/N<sub>2</sub>/CH<sub>4</sub> mixture

Flexible molecular sieving of C<sub>2</sub>H<sub>2</sub> from CO<sub>2</sub> by a new cost-effective metal organic framework with intrinsic hydrogen bonds

Computational Study on Adsorption and Separation of H2/CH4/CO2 in Double-Walled Metal-Dipyrazole Frameworks

Computational screening of metal–organic frameworks for separation of CO2 and N2 from wet flue gas

High-Throughput Screening of Metal–Organic Frameworks Assisted by Machine Learning: Propane/Propylene Separation

Machine-Learning-Assisted High-Throughput computational screening of Metal–Organic framework membranes for hydrogen separation

High-throughput screening and evaluation of double-linker metal-organic frameworks for CO 2 /H 2 adsorption and separation

Metal–organic framework channelled graphene composite membranes for H<sub>2</sub>/CO<sub>2</sub>separation

Large-Scale Screening and Machine Learning for Metal–Organic Framework Membranes to Capture CO2 from Flue Gas

Screening and design of COF-based mixed-matrix membrane for CH4/N2 separation

Metal-Organic Framework Channelled Graphene Composite Membranes for H-2/Co2 Separation

Discovery of a Scalable Metal–Organic Framework with a Switchable Structure for Efficient CH 4 /N 2 Separation

X-ray Diffraction and Molecular Simulations in the Study of Metal-Organic Frameworks for Membrane Gas Separation.

Transformation of Metal-Organic Frameworks for Molecular Sieving Membranes

High-Throughput Virtual Screening of Biometal–Organic Frameworks for O 2 /N 2 Separation

One Scalable and Stable Metal-Organic Framework for Efficient Separation of CH 4 /N 2 Mixture

Molecular Design of Metal-Organic Frameworks with Different Metal Ligands for Bio-Methane Separation

Machine learning and in-silico screening of metal–organic frameworks for O2/N2 dynamic adsorption and separation

Computational screening and design of nanoporous membranes for efficient carbon isotope separation

Data-Driven and Machine Learning to Screen Metal-Organic Frameworks for the Efficient Separation of Methane

Research Progress of High-throughput Computational Screening of Metal-Organic Frameworks