Abstract:Metamaterials have attracted tremendous research interest due to their fascinating unusual properties that are not available from nature, such as negative refractive index, reverse Doppler Effect, negative compressibility, etc. [1]. However, conventional metamaterials are simply structures as their special properties are independent to intrinsic properties of building blocks, which tarnishes their application perspectives to a large extent. Ferromagnetic microwires have been reported feasible to create electromagnetically double negative (DNG) medium by arranging them in a parallel [2] and orthogonal manner [3]. Recently we proposed the concept of metacomposites containing Fe-based microwires and revealed their DNG properties in line with advantages such as structural integrity and economic processing over metamaterials [4, 5]. Herein, as a step further, metacomposites containing hybrid Co- and Fe-based microwire arrays with different topology are designed and fabricated. A tunable DNG feature under external dc magnetic field is observed in the metacomposite containing continuous wire arrays evidenced by transmission windows and a negative dielectric permittivity dispersion. A DNG/band stop characteristic is observed in the metacomposite containing short-cut wires confirmed by a dip at 6 GHz in the transmission spectrum. Experimentally, glass coated Fe77Si10B10C3 (total diameter of 20 μm, glass coat thickness of 3.4 μm) and Fe4Co68.7Ni1B13Si11Mo2.3 (total diameter of 12.8 μm, glass coat thickness of 2.4 μm) were embedded into E-glass 913 glass fibers reinforced prepregs in two topological arrangements: parallel Co-based (3 mm spacing) and parallel Fe-based wire array (10 mm spacing); short-cut Co-based and continuous orthogonal Fe-based wire array (10 mm spacing). A prepreg lay-up and a standard autoclave curing procedure were then followed to fabricate metacomposite sample with the size of 500×500×1.2 mm3. The microwave behavior of the metacomposites was examined by the free-space measurement in the frequency band of 0.9 to 17 GHz with the electrical component parallel to the glass fiber direction. To track the magnetic field tunable properties, an additional external dc magnetic bias up to 3000 Oe was applied along the glass fiber direction [6]. In the metacomposite containing continuous hybrid wires, a series of transmission windows emerge in 1-3 GHz when external field is higher than 300 Oe together with a region of negative values of real part of permittivity. A further analysis on transmission phase velocity validates such magnetically tuned DNG feature. This is due to the fact that the ferromagnetic resonance (FMR) of microwires provides negative magnetic permeability and the parallel arrangement performs as plasmonics thus giving negative ε. The window positions in addition to the DNG band can be tuned by increasing the field and follows a redshift-blueshift behavior due to the competition of loss compensation effect and FMR. In the metacomposite containing short-cut wires, an enhanced transmission window and a sharp transmission dip are identified in the 1-6 GHz compared with metacomposite containing pure Fe-based orthogonal arrays, indicating a DNG/bandstop feature. This suggests that the DNG properties can be conveniently turned on/off by inserting a layer of short-cut Co-based wires. We explain such effect by the dipole resonance of short-cut Co-based wires at 5.8 GHz and their synergistic role in enhancing DNG properties of hybrid metacomposites. Moreover, the dynamic interactions between Co-Co, Fe-Fe and Co-Fe wires contribute to the absorption of metacomposites and make the DNG or bandstop operating frequency tunable by controlling these mesostructural factors. These unique findings created by hybridization Fe- and Co-based wires into composites make proposed metacomposites strong candidates for microwave cloaking and radio frequency identification.

Large electromagnetic wave absorbing bandwidth of composites containing Fe<inf>3</inf>O<inf>4</inf> nano ribbons

Large Electromagnetic Wave Absorbing Bandwidth of Composites Containing Fe<sub>3</sub>O<sub>4</sub> Nanoribbons

Hierarchical FeCo@MoS2 Nanoflowers with Strong Electromagnetic Wave Absorption and Broad Bandwidth

1D Magnetic Materials of Fe 3 O 4 and Fe with High Performance of Microwave Absorption Fabricated by Electrospinning Method

Tunable Metacomposites Containing Hybrid Co- and Fe-based Ferromagnetic Microwires

Co x Fe y @C Composites with Tunable Atomic Ratios for Excellent Electromagnetic Absorption Properties

Mesoscopically ordered Fe<sub>3</sub>O<sub>4</sub>/C nano-composite for superior broadband electromagnetic wave absorption

A multi-layer core-shell structure CoFe<sub>2</sub>O<sub>4</sub>@Fe<sub>3</sub>C@NiO composite with high broadband electromagnetic wave-absorption performance

Facile synthesis of core-shell structured C/Fe3O4 composite fiber electromagnetic wave absorbing materials with multiple loss mechanisms

Facile synthesis of Co x Fe y @C nanocomposite fibers derived from pyrolysis of cobalt/iron chelate nanowires for strong broadband electromagnetic wave absorption

Achieving High-Efficiency and Broad Bandwidth with Low Filler Loading for Hierarchical Fe3O4/Co-MOF Absorbers

Enhanced Microwave Absorbing Ability of Carbon Fibers with Embedded FeCo/CoFe2O4 Nanoparticles

A Versatile Strategy Towards Magnetic/dielectric Porous Heterostructure with Confinement Effect for Lightweight and Broadband Electromagnetic Wave Absorption

Controllable Preparation and Microwave Absorption Properties of Shape Anisotropic Fe3O4 Nanobelts

Carbon-encapsulated Co 7 Fe 3 nanocomposites with high intensity and ultra-wideband microwave absorption

Efficient and Lightweight Electromagnetic Wave Absorber Derived from Metal Organic Framework-Encapsulated Cobalt Nanoparticles

Enhanced Electromagnetic Wave Absorption of Nanoporous Fe3O4 @ Carbon Composites Derived from Metal-Organic Frameworks

Novel broadband electromagnetic-wave absorption metasurfaces composed of C-doped FeCoNiSiAl high-entropy-alloy ribbons with hierarchical nanostructures

Three-dimensional Foam-Like Fe3O4@C Core-Shell Nanocomposites: Controllable Synthesis and Wideband Electromagnetic Wave Absorption Properties

N, O‐Doped Walnut‐Like Porous Carbon Composite Microspheres Loaded with Fe/Co Nanoparticles for Adjustable Electromagnetic Wave Absorption

Hollow FeNi/NiFe 2 O 4 -Codoped Carbon Composite Nanorods for Electromagnetic Wave Absorption