Abstract:Single-phase lead-zirconate-titanate (PZT) perovskite nanofibers, with \({\text{Pb}}\left({\text{Zr}}_{0.5}{\text{Ti}}_{0.5}\right){\text{O}}_{3}\) composition were synthesized using the electrospinning technique. Poly-vinyl-pyrrolidone (PVP) was used as viscosity controller, size and uniformity of the \({\text{Pb}}\left({\text{Zr}}_{0.5}{\text{Ti}}_{0.5}\right){\text{O}}_{3}\) nanofibers were optimized against different PVP concentrations. The results showed that PVP concentrations play a significant role in the fabrication, homogeneity, uniformity, porosity, and particularly in the diameter of PZT nanofibers. SEM and XRD results revealed the formation of sing-phase \({\text{Pb}}\left({\text{Zr}}_{0.5}{\text{Ti}}_{0.5}\right){\text{O}}_{3}\) nanofibers at 600 °C with an average diameter of ~ 96 nm. The prepared PZT nanofibers exhibited a significantly wide bandgap (~ 3.5 eV) and a high dielectric-constant (~ 1827). The device of single-phase PZT nanofibers was fabricated on interdigitated electrodes to study the current–voltage, impedance spectroscopy, and dielectric characteristics of the PZT nanofibers. The current–voltage characteristics of the fabricated device with PZT nanofibers showed non-ohmic properties. The non-linear I–V characteristics at temperatures between 308 and 408 K indicate two distinct regions. Impedance spectroscopy indicated the presence of non-ideal Debye type behavior in \({\text{Pb}}\left({\text{Zr}}_{0.5}{\text{Ti}}_{0.5}\right){\text{O}}_{3}\) nanofibers and was ascribed to the existence of heterogeneity in the sample. The measured capacitances were assigned to two electro-active regions in the prepared \({\text{Pb}}\left({\text{Zr}}_{0.5}{\text{Ti}}_{0.5}\right){\text{O}}_{3}\) nanofibers. A proto-type piezoelectric nanogenerator based on PZT nanofibers was fabricated to study the piezoelectric properties of \({\text{Pb}}\left({\text{Zr}}_{0.5}{\text{Ti}}_{0.5}\right){\text{O}}_{3}\) nanofibers. PZT nanofibers were aligned on interdigitated electrodes of silver wire, which demonstrated piezoelectric performance and delivered an output voltage of ~ 40 V under periodic stress applications.

Preparation and Mechanical Energy Harvesting of BaTi<sub>0.9</sub>Zr<sub>0.1</sub>O<sub>3</sub> Ceramic Nanofibers

Enhancing Electrical Properties of High-Curie Temperature Piezoelectric Ceramics BNT-PZT and Their Mechanism

Fabrication and Piezoresponse of Electrospun Ultra-Fine Pb(Zr0.3, Ti0.7)O3 Nanofibers

Facile Preparation and Performance of Novel High-Tc Xbi(ni1/2ti1/2)o3-(1-x)pb(zr1/2ti1/2)o3 Piezoceramics

Fabrication and properties of BaTiO3 ceramics via digital light processing for piezoelectric energy harvesters

Fabrication and characterization of $${\text{Pb}}({\text{Zr}}_{0.5}{\text{Ti}}_{0.5}){\text{O}}_{3}$$ nanofibers for nanogenerator applications

Porosity effect on the functional properties and energy harvesting performance of Ba0.85Ca0.15Ti0.90Zr0.10O3 ceramics

Fabrication of Lead-Free (na0.82k0.18)0.5bi0.5tio3 Piezoelectric Nanofiber by Electrospinning

Dopamine-modified Ba0.85Ca0.15Zr0.1Ti0.9O3 ultra-fine fibers/PVDF-HFP composite–based nanogenerator: synergistic effect on output electric signal

Study on preparation process and enhanced piezoelectric performance of pine-needle-like ZnO@PVDF composite nanofibers

Modular and excisable molecular switch for the induction of gene expression by the yeast FLP recombinase.

Exploration of single-crystal like electrospun Pb(Zr_(0.52)Ti_(0.48))O_3 nanofibers synthesis via electrospinning

Flexible cellulose-based piezoelectric composite membrane involving PVDF and BaTiO3 synthesized with the assistance of TEMPO-oxidized cellulose nanofibrils

Piezoelectric PVDF‐TrFE nanocomposite mats filled with BaTiO3 nanofibers: The effect of poling conditions

BaHf0.05Ti0.95O3 Ceramics from Sol–Gel and Solid-State Processes: Application to the Modelling of Piezoelectric Energy Harvesters

Flexible composites with Ce-doped BaTiO3/P(VDF-TrFE) nanofibers for piezoelectric device

FABRICATION AND PERFORMANCE OF LEAD LANTHANUM ZIRCONATE TITANATE PIEZOELECTRIC CERAMIC FIBER

Interface induced performance enhancement in flexible BaTiO3/PVDF-TrFE based piezoelectric nanogenerators

Modulating Energy Harvesting Behavior of PVDF Piezo-Polymer by Incorporation of BCZT Ceramic Filler

Preparation of high piezoelectric and flexible polyvinylidene fluoride nanofibers via lead zirconium titanate doping

Synthesis and characterization of barium titanate nanoplatelets/polyvinylidene fluoride nanocomposite for piezoelectric properties