Abstract:A series of polyamic acid copolymers (co-PAAs) with para -hydroxyl groups was synthesized using two diamine monomers, namely p -phenylenediamine ( p -PDA) and 5-amino-2-(2-hydroxy-5-aminobenzene)-benzoxazole ( m -pHBOA), of different molar ratios through copolymerization with 3,3′,4,4′-biphenyltetracarboxylic dianhydride (BPDA) in N , N -dimethyacetamine (DMAc). The co-PAA solutions were used to fabricate fibers by dry-jet wet spinning, and thermal imidization was conducted to obtain polyimide copolymer (co-PI) fibers. The effects of the m -pHBOA moiety on molecular packing and physical properties of the prepared fibers were investigated. Fourier transform infrared (FTIR) spectroscopic results confirmed that intra/intermolecular hydrogen bonds originated from the hydroxyl group and the nitrogen atom of the benzoxazole group and/or the hydroxyl group and the oxygen atom of the carbonyl group of cyclic imide. As-prepared PI fibers displayed homogenous and smooth surface and uniform diameter. The glass transition temperatures ( T g s) of PI fibers were within 311−337 °C. The polyimide fibers showed 5% weight loss temperature ( T 5% ) at above 510 °C in air. Two-dimensional wide-angle X-ray diffraction (WXRD) patterns indicated that the homo-PI and co-PI fibers presented regularly arranged polymer chains along the fiber axial direction. The ordered molecular packing along the transversal direction was destroyed by introducing the m -pHBOA moiety. Moreover, the crystallinity and orientation factors increased with increasing draw ratio. Small-angle X-ray scattering (SAXS) results showed that it is beneficial to reduce defects in the fibers by increasing the draw ratio. The resultant PI fibers exhibited excellent mechanical properties with fracture strength and initial modulus of 2.48 and 89.73 GPa, respectively, when the molar ratio of p -PDA/ m -pHBOA was 5/5 and the draw ratio was 3.0.

Two Step Synthesis of Hydroxyl Group Polyimide Based on 2,2-Bis(amino-4-hydroxyphenyl)hexafluoropropane

Two step synthesis of hydroxyl group polyimide based on 2,2-bis(3-amino-4-hydroxyphenyl)hexafluoropropane

Synthesis and Properties of a High‐molecular‐weight Poly(amic Acid) and Polyimide Based on 2,2‐Bis(3‐amino‐4‐hydroxyphenyl)hexafluoropropane

One-pot Aqueous-Phase Synthesis of Polyimides from Typical Monomers

Synthesis and Properties of a High-Molecular-Weight Polyimide Based on 4, 4'-(Hexafluoroisopropylidene) Diphthalic Anhydride

Preparation and Properties of High-performance Polyimide Copolymer Fibers Derived from 5-Amino-2-(2-hydroxy-5-aminobenzene)-benzoxazole

Synthesis and Characterization of Polyimides Derived from 5-Amino-2(p-aminophenyl) Benzoxazole Monomer

Synthesis and Characterization of Polyimide from Hydrogenated Pyromellitic Anhydride

Synthesis and Characterization of Asymmetric Polyimides with High Transparency

Structure and Properties of Thermoplastic Polyimide Based on 4', 4'-(Oxybis (methylene)) Bis ([1.1'- Bipheny]3-Amine) Diamine

Synthesis and characterization of highly refractive polyimides from 4,4′-thiobis[(p-phenylenesulfanyl)aniline] and various aromatic tetracarboxylic dianhydrides

Synthesis and Characterization of Biphenyl Polyimide Containing Alkyl Sulfide Structure

Synthesis and Characterization of Pyridine-Bridged Fluorinated Polyimides

Synthesis and properties of fluorinated polyimides from 1,1-bis(4-amino-3,5-dimethylphenyl)-1-(3,4,5-trifluorophenyl)-2,2,2-trifluoroethane and various aromatic dianhydrides

Thermal Degradation Kinetics of Polyimide Containing 2,6-Benzobisoxazole Units

Synthesis and properties of polyimides from a diamine containing side diphenylphosphine oxide and trifluoromethyl groups

Synthesis and Properties of Novel Polyimide Fibers Containing Phosphorus Groups in the Side Chain(DATPPO)

Synthesis and Characterization of Hyperbranched Polyimides from a Novel B ' B-2-type Triamine with Tert-Butyl Side Group

Synthesis and Characterization of Polyimides from 4,4′-(3-(tert-butyl)-4-aminophenoxy)diphenyl Ether

Analysis of the kinetics of soluble polyimide formation by the thermal imidization of polyamic acids in amide solvents with allowance for the side reaction of anhydride group hydrolysis

Effects of pre-imidization on rheological behaviors of polyamic acid solution and thermal mechanical properties of polyimide film: an experiment and molecular dynamics simulation