Influence of CaO content by mass in sintering aid and sintering temperature on the properties of Al2O3-based microwave ceramic materials
Jing-rui KANG,Gui-xia DONG,Wei-dan HAN,Lei LI,Yi-nan LV,Xi ZHANG
DOI: https://doi.org/10.19591/j.cnki.cn11-1974/tf.2018.01.002
2018-01-01
Abstract:Alumina ceramics were prepared by normal pressure sintering in air,using CaO-SiO2-TiO2 as the sintering aid.The effects of CaO content by mass in sintering aid and sintering temperature on phase composition,microstructures,and dielectric properties of Al2O3-based microwave ceramic samples were investigated.The results show that,the second phase of CaAl12O19 appears in the Al2O3 ceramics with CaO addition,and the phase content increases with the increase of CaO content in sintering aid.The dielectric constant of Al2O3 ceramics increases with the increase of CaO content in sintering aid,while the quality factor increases first and then decreases.With the increase of sintering temperature,the relative density and quality factor of Al2O3 ceramics increase first and then decrease,while the dielectric constant and temperature coefficient of resonance frequency keep increasing.The Al2O3 ceramic sintered at 1450 ℃ with the CaO mass fraction of 0.4% in sintering aid presents the superior comprehensive properties,the relative density of the sintered body is 98.61%,the dielectric constant is 9.88,the quality factor is 21957 GHz,and the temperature coefficient of resonance frequency is-21.353 × 10-6/℃.