Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external <i xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">Q</i> factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Design of dual-mode pentagon patch resonator filter using asymmetrical λ/4 interdigital coupled lines

Design of Dual‐mode Pentagon Patch Resonator Filter Using Asymmetrical Λ/4 Interdigital Coupled Lines

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Extended Doublet Bandpass Filters Implemented with Microstrip Resonator and Full-/Half-Mode Substrate Integrated Cavities

Substrate Integrated Waveguide Filter with Flat Passband Based on Complex Couplings

A study of dual-mode patch resonator-based microwave filters

Design of a Compact Dual‐mode Patch Resonator Band‐pass Filter

Compact Single- and Dual-Band Filtering 180° Hybrid Couplers on Circular Patch Resonator

Collaborative Design of a New Dual-Bandpass 180$^{\circ}$ Hybrid Coupler

A Novel Asymmetry C-band Dual-Mode Bandpass Filter Using Pentagon Loop Resonator

Dual-passband filter formed by coupling path separating dual-mode resonators and optimization method

Miniaturized Dual‐mode Patch Filter Using Slotted Square Resonator and Meander Spurline

Dual-mode microstrip bandpass filter using circular patch resonator with two transmission zeros

The Design for Tri-Band BandPass Filter Using OPen-LooP Resonator and Asynnetric CouPling Lines

Dual-mode resonator filter with improved feed-lines for dual-band applications

Dual-mode dual-band bandpass filter design using open-loop resonators

Microstrip Dual-Mode Triangular Patch Resonator Bandpass Filters with Two or Four Transmission Zeros

Low-Loss Triangular-Patch Dual-Mode Bandpass Filter with Slotted Input/Output

DUAL-MODE BPF WITH FOUR TRANSMISSION ZEROS USING S-L COUPLING STRUCTURE WITH QUADRATIC FUNCTION COUPLING COEFFICIENT

Novel dual-mode square-loop resonator filter using spurline and slot techniques