Abstract:In order to study the mechanical properties of seawater sea sand concrete and the durability damage law of seawater sea sand concrete under the action of seawater erosion, corresponding specimens were prepared and subjected to cube compressive strength, flexural strength, and dry-wet cycle tests by taking the volume dosage of glass fibers and polyvinyl alcohol fibers as variables. The test combined SEM scanning and EDS to analyze the microstructure of fiber-reinforced seawater sand concrete, and established a model based on the two-parameter Weibull probability distribution. The results show that the fiber has a significant effect on improving the mechanical properties and erosion resistance of seawater sand concrete. When the total volume content is 0.3% and the mixing ratio is 1:1, the improvement effect is the best. The maximum increase in cubic compressive strength was 24.2%; the maximum increase in flexural strength was 38.8%. After the specimens were subjected to wet and dry cycles for 360d, the maximum reduction in mass loss rate was 41.23%; the maximum reduction in strength loss rate was 27.55%. As observed from the microscopic images, the main disadvantage of SSC is that the salt crystallization and swelling matter produced by the erosion ions will weaken the bond between aggregate and mortar, resulting in defects in the interfacial transition zone (ITZ). Under the action of dry-wet cycles, the alternating dry-wet forces, the expansion pressure generated by expansive substances and the crystallization pressure generated by salt crystallization will change the microstructure, and therefore the damage of the specimen will deepen with the extension of erosion time. The microscopic images also show that the doping fibers can improve the internal integrity and compactness of the matrix, thus significantly improving the mechanical properties and durability of seawater sea sand concrete. In this test, a damage model was established based on the two-parameter Weibull distribution model, and the damage law between strength loss and dry-wet cycles was fitted, which provides a favorable basis to study the damage of seawater sea sand concrete under wet-dry cycling.

Experimental study on interfacial bond-slip behavior of weathering steel and seawater sea-sand concrete in corrosive marine environments

Experimental research and mechanical analysis on the bond‐slip behavior between concrete and corroded I‐shaped steel

Test study on the bond stress-slip relationship between concrete and steel bars

Bond Behaviour of Normal/Recycled Concrete and Corroded Steel Bars

Experimental Investigation and Design of Corroded Stud Shear Connectors

Bond–Slip Performance of Steel–Fiber-Reinforced Polymer Composite Bars (SFCBs) and Glass Fiber with Expansion-Agent-Reinforced Seawater Sea-Sand Concrete (GF-EA-SSSC) under Freezing–Thawing Environment

Corrosion Development of Carbon Steel Grids and Shear Connectors in Cracked Composite Beams Exposed to Wet-Dry Cycles in Chloride Environment.

Post-fire performance of bonding interface in explosion-welded stainless-clad bimetallic steel

Research on the performance of seawater sea-sand concrete: A review

Study on mechanical properties and anti-erosion performance of fiber reinforced seawater sea sand concrete

Study on Bond-Slip Behavior between Seawater Sea-Sand Concrete and Carbon Fiber-Reinforced Polymer (CFRP) Bars with Different Surface Shapes

Experimental study on the interfacial bond strength and energy dissipation capacity of steel and steel fibre reinforced concrete (SSFRC) structures

Investigation of Bond Behavior between Steel Bar and Concrete under Coupled Effect of Fatigue Loading and Corrosion

Study on Bond Performance between Corroded Deformed Steel Bar and DS-ECC

Corrosion products of low-alloy steel bars and their induction of cracking in seawater sea-sand concrete cover

Effects of exposure in seawater sea-sand concrete pore solution on fatigue performance of carbon FRP bars

Interface Shear Stress of Concrete Beams Strengthened with FRP in Salt Water

Experiment Study on Bond Slip Behavior Between Section Steel and Concrete in SRC Structures

Bond Performance between Fiber-Wrapped Ribbed Basalt Fiber-Reinforced Polymer Bars and Seawater Sea-Sand Concrete

Interfacial bond-slip behaviour between reinforced high-strength concrete and built-in steel plate with studs