Abstract:Elevated concentrations of antimony (Sb) in the ecological environment have received considerable attention due to the harmful consequence involved. This study synthesized sulphidated ferrihydrite with different S:Fe molar ratios to efficiently remove Sb(V) from water. As the S:Fe molar ratio ranged from 0.00 to 1.48, the removal efficiency of Sb(V) by sulphidated ferrihydrite first decreased before increasing considerably. Sulphidated ferrihydrite with an S:Fe molar ratio of 0.74 exhibited a strong affinity towards Sb(V) with an optimal removal capacity of 963.74 mg Sb/g, which was 3.2-fold higher than that of ferrihydrite. In the kinetic experiments, the removal behavior of Sb(V) was well described by the pseudo-second-order model, suggesting that the removal process was controlled via chemisorption. Moreover, Sb(V) was efficiently removed over a wide pH range of 3.00-11.00, and coexisting anions (NO3-, Cl-, SO42-, SiO32-, CO32- and PO43-) exhibited marginal impact on the Sb(V) removal by sulphidated ferrihydrite (S:Fe ≥ 0.44). The characterization results of XRD, SEM, TEM mapping and etched XPS revealed goethite to be the dominant phase of sulphidated ferrihydrite with an S:Fe molar ratio of 0.15, while a mixed constitution of mixed-valent iron (hydro)oxides and iron sulphide was formed when the S:Fe molar ratio exceeded 0.44. Moreover, sulphidated ferrihydrite acted as a donor for Fe and S for the effective retention of Sb(V) by two main pathways: precipitation (tripuhyite, FeSbO4) and complexation (≡S-H and ≡Fe-OH). Therefore, sulphidated ferrihydrite is a promising material for eliminating Sb(V) contamination from water.

Efficient Removal of Sb(Ⅴ) from Water Using Sulphidated Ferrihydrite Via Tripuhyite (fesbo4) Precipitation and Complexation.

Efficient removal of Sb(V) from water using sulphidated ferrihydrite via tripuhyite (FeSbO4) precipitation and complexation

Effective Removal of Sb(V) from Aqueous Solutions by Electrocoagulation with Composite Scrap Iron-Manganese As an Anode.

Highly Efficient Antimonate Removal from Water by Pyrite/Hematite Bi-Mineral: Performance and Mechanism Studies

Antimony(V) removal from water within ferrihydrite transformation: Influence of humic acid

[Removal of Antimony from Water by Nano Zero-Valent Iron/Activated Carbon Composites].

Removal of Sb(V) from wastewater via siliceous ferrihydrite: Interactions among ferrihydrite, coprecipitated Si, and adsorbed Sb(V)

Antimony(V) removal from water by hydrated ferric oxides supported by calcite sand and polymeric anion exchanger

Adsorption of Sb(III) and Sb(V) on Freshly Prepared Ferric Hydroxide (Feoxhy).

Comparative removal of As(V) and Sb(V) from aqueous solution by sulfide-modified α-FeOOH

Removal of Sb(V) from Aqueous Solutions Using Fe-Mn Binary Oxides: the Influence of Iron Oxides Forms and the Role of Manganese Oxides

Removal of Sb(III) and Sb(V) from Aqueous Solutions Using nZVI

Study on technology and mechanism of antimony removal by FeSO4 enhanced activated sludge method

An Effective Method to Remove Antimony in Water by Using Iron-Based Coagulants

Synthesis of Fe3O4 Magnetic Nanoparticles Coated with Cationic Surfactants and Their Applications in Sb(V) Removal from Water.

Enhancing The Removal Of Sb (Iii) From Water: A Fe3o4@Hco Composite Adsorbent Caged In Sodium Alginate Microbeads

Sb(III) Removal by Granular Adsorbent Synthesized with Iron-Containing Water Treatment Residuals and Chitosan

Highly efficient adsorption of Sb(III) and Sb(V) in water treatment by hybrid functional Zr-Fe metallic oxide composite

Unveiling the crucial role of iron mineral phase transformation in antimony(V) elimination from natural water

Efficient removal of antimony by a facile liquid-controlled strategy reinforced hematite-spinel (Fe2O3-MnFe2O4) composite: construction, simulation and practical evaluation

Removal of Sb(III) and Sb(V) by Ferric Chloride Coagulation: Implications of Fe Solubility