Abstract:Surface plasmon resonance (SPR), a promising technology, is beneficial for various applications, such as photothermal conversion, solar cells, photocatalysts, and sensing. However, the SPR performance may be restricted by the 1D- or 2D-distributed hotspots. The bicontinuous interconnected gyroid-structured materials have emerged in light energy conversion due to a high density of 3D-distributed hotspots, ultrahigh light–matter interactions and large scattering cross-section. Here, a series of bioinspired Au–CuS gyroid-structured materials are fabricated by precisely controlling the deposition time of CuS nanoparticles (NPs) and then adopted for solar steam generation. Specifically, Au–CuS/GMs-80 present the highest evaporation efficiency of 88.8% under normal 1 sun, with a suitable filling rate (57%) and a large inner surface area (∼2.72 × 105 nm2 per unit cell), which simultaneously achieves a dynamic balance between water absorption and evaporation as well as efficient heat conduction with water in nanochannels. Compared with other state-of-the-art devices, Au–CuS/GMs-80 steam generator requires a much lower photothermal component loading (<1 mg cm–2) and still guarantees outstanding evaporation performance. This superior evaporation performance is attributed to broadband light absorption, continuous water supply, excellent heat generation and thermal insulation, and good light–heat–water interaction. The combination of 3D interconnected nanostructures with controllable metal–semiconductor deposition could provide a new method for the future design of high-performance plasmonic devices.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c06701?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c06701</a>.Summarization of various samples; characterizations of H. glaucippe; optical microscopy image and lower magnification SEM image of Au–CuS/GMs-80; TEM images of Au seeds/GMs from the top view; TEM cross-section images of O/GMs, Au seeds/GMs, and Au-CuS/GMs; Au-CuS layer thickness of Au–CuS/GMs with different tCuS values; thickness curve of Au–CuS films and the proportion of the Au NP radius; XPS result of Au–CuS/GMs; fitting curves of FR and S; water contact angles of O/GMs and Au–CuS/GMs; SERS signals detected from Au/GMs-SERS and Au/LMs-SERS; solar steam generation performances of the samples; average weight of Au–CuS/GMs-80 scales; SEM images of Au–CuS/GMs-80 before and after 50 cycles of solar steam generation; optical image of the Au–CuS/GMs-80 lower surface after the irradiation of 808 nm light; efficiencies of various steam-generation devices under solar light; and efficiencies of various steam-generation devices under NIR light (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c06701/suppl_file/am0c06701_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Low Cost, Robust, Environmentally Friendly, Wood Supported 3D-Hierarchical Cu3SnS4 for Efficient Solar Powered Steam Generation

3D wood-based evaporator for highly efficient solar steam generation

Highly Flexible and Efficient Solar Steam Generation Device

Porous silicon modified wood as a high-efficiency solar steam generator

A 3D Opened Hollow Photothermal Evaporator for Highly Efficient Solar Steam Generation

Engineered Wood with Hierarchically Tunable Microchannels toward Efficient Solar Vapor Generation

Wood–Graphene Oxide Composite for Highly Efficient Solar Steam Generation and Desalination

Coating of Wood with Fe 2 O 3 -Decorated Carbon Nanotubes by One-Step Combustion for Efficient Solar Steam Generation

Sustainable Wood-Based Hierarchical Solar Steam Generator: A Biomimetic Design with Reduced Vaporization Enthalpy of Water

A three-dimensional antifungal wooden cone evaporator for highly efficient solar steam generation

Plasmonic Wood for High‐Efficiency Solar Steam Generation

Alkali treatment combined with surface carbonized wood for high-efficiency solar interfacial evaporation

Nature-inspired design: p- toluenesulfonic acid-assisted hydrothermally engineered wood for solar steam generation

Hydrothermally Modified 3D Porous Loofah Sponges with MoS 2 Sheets and Carbon Particles for Efficient Solar Steam Generation and Seawater Desalination

CuS Hollow Nanospheres/Cellulose Composite Film as a Recyclable Interfacial Photothermal Evaporator for Solar Steam Generation

High‐yield, green and scalable solar‐powered interfacial evaporation of multi‐bioinspired hierarchical integrated nanofibrous wood surface with sustainable steam escape

High-performance bilayer solar evaporators constructed by candle-derived carbon nanoparticle/wood hybrid

Efficient Solar Steam Generation by Multiscale Photothermal Structures Derived from Cactus Stems

3D Interconnected Gyroid Au–CuS Materials for Efficient Solar Steam Generation

3D network structure and hydrophobic Ni-G-WO3-x solar-driven interfacial evaporator for highly efficient steam generation

Enhanced light trapping effect of hierarchical structure assembled from flower-like cobalt tetroxide and 3D-printed structure for efficient solar evaporation