Abstract:2D layered MXene (TiCT) with high conductivity and pseudo-capacitance properties presents great application potential with regard to electrode materials for supercapacitors. However, the self-restacking and agglomeration phenomenon between TiCT layers retards ion transfer and limits electrochemical performance improvement. In this study, a 3D porous structure of TiCT was obtained by adding alkali to a TiCT colloid, which was followed by flocculation. Alkaline-induced flocculation is simple and effective, can be completed within minutes, and provides 3D porous networks. As 3D porous network structures present larger surface areas and more active sites, ions transfer accelerates, which is crucial with regard to the improvement of the superior capacitance and rate performance of electrodes. The sample processed with KOH (K-a-TiCT) exhibited a high capacity of approximately 300.2 F g at the current density of 1 A g. The capacitance of the samples treated with NaOH and LiOH is low. In addition, annealing is essential to further improve the capacitive performance of TiCT. After annealing at 400 °C for 2 h in a vacuum tube furnace, the sample treated with KOH (K-A-TiCT) exhibited an excellent specific capacitance of approximately 400.7 F g at a current density of 1 A g, which is considerably higher than that of pristine TiCT (228.2 F g). Furthermore, after 5000 charge-discharge cycles, the capacitance retention rate reached 89%. This result can be attributed to annealing, which can further remove unfavourable surface groups, such as -F or -Cl, and then improve conductivity capacitance and rate performance. This study can provide an effective approach to the preparation of high-performance supercapacitor electrode materials.

3D Porous MXene (Ti 3 C 2 T x ) Prepared by Alkaline-Induced Flocculation for Supercapacitor Electrodes.

Achieving Quick Charge/discharge Rate of 3.0 V S−1 by 2D Titanium Carbide (mxene) Via N-doped Carbon Intercalation

3D Porous Ti 3 C 2 T X Prepared on Carbon Cloth by Electrophoretic Co-Deposition for Enhanced Supercapacitor Performance

Electrode Based on Porous MXene Nanosheets for High-Performance Supercapacitor

Tuning the Pore Size Distribution of Ti3C2Tx Porous Film for High Capacity Supercapacitor Electrode

A Supercapacitor Electrode Synthesis Strategy: Proton Acid‐Treated Ti 3 C 2 T X Film with Single‐walled Carbon Nanotubes As a Reinforcement

Tuning the pore size distribution of Ti3C2T porous film for high capacity supercapacitor electrode

Metal Cation Pre-Intercalated Ti3C2Tx MXene As Ultra-High Areal Capacitance Electrodes for Aqueous Supercapacitors

Aggregation‐Resistant 3D Ti 3 C 2 T x MXene with Enhanced Kinetics for Potassium Ion Hybrid Capacitors

New Ti3-yNbyC2Tx MXenes As High-Rate and Ultra-Stable Electrode Materials for Supercapacitors

Composites of Tio2 Nanoparticles Deposited on Ti3c2 Mxene Nanosheets with Enhanced Electrochemical Performance

Nitrogen-doped Ti3C2Tx MXene Prepared by Thermal Decomposition of Ammonium Salts and Its Application in Flexible Quasi-Solid-state Supercapacitor

Multidimensional Carbon Template Preparation of 3D Multilayered TiC Nanoflakes for High Performance Symmetric Supercapacitor

Intensifying Electrochemical Activity of Ti3C2Tx MXene via Customized Interlayer Structure and Surface Chemistry

MXene nanomesh for high-performance supercapacitor

A Novel Sandwiched Porous MXene/Polyaniline Nanofibers Composite Film for High Capacitance Supercapacitor Electrode

A Facile Etching Route for Preparing Ti 3 C 2 MXene with Enhanced Electrochemical Performance in Silver Nitrate Solution

Achieving High Pseudocapacitance of 2D Titanium Carbide (mxene) by Cation Intercalation and Surface Modification

2D Carbide MXene under Postetch Low-Temperature Annealing for High–performance Supercapacitor Electrode

Room Temperature Oxidation of Ti3C2 MXene for Supercapacitor Electrodes

Nitrogen Doped Intercalation TiO 2 /TiN/Ti 3 C 2 T x Nanocomposite Electrodes with Enhanced Pseudocapacitance.