Abstract:Electrochemical capacitors using neutral aqueous electrolytes are safer and cheaper and allow diverse current collectors compared with the counterparts using organic or acidic/alkaline electrolytes. Two-dimensional (2D) MXenes have been demonstrated as the high-capacitive materials with high rate performance. However, MXene electrodes often exhibit a limited capacitance in neutral electrolytes, where the reversible electrochemical reactions rely greatly on the structural and surface properties of MXenes depending on their synthesis methods. Herein, a simple and highly efficient strategy, which combines HF etching of Ti3AlC2 powder and subsequent amine-assisted delamination at a low temperature, is developed to synthesize 2D Ti3C2Tx MXenes. The comprehensive results demonstrate that the enlarged interlayer spacing and the presence of more −O-containing functional groups synergistically contribute to the improvement of capacitive performance in neutral electrolytes. The 2D Ti3C2Tx MXenes show excellent electrochemical performance in various neutral electrolytes, and a high specific gravimetric capacitance of 149.8 F/g is achieved in 1.0 M Li2SO4. Furthermore, the flexible solid-state supercapacitors (SCs) with a neutral PVA/LiCl gel electrolyte possess a superior areal capacitance (163.1 mF/cm2) and high energy density (17.6 μWh/cm2 at 0.07 mW/cm2), together with high user safety. This work provides a promising guideline of synthesis strategy for high-capacitive MXenes used in neutral electrolytes, which may promote the development of safe and flexible power sources with a high energy density.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c06161.Fractions extracted from Ti 2p and O 1s XPS spectra for Ti3C2Tx-TMAOH and Ti3C2Tx-HF samples; SEM images of raw Ti3AlC2 crystals and multilayered Ti3C2Tx after diluted HF etching of Ti3AlC2 for 2 h; digital photographs showing Tyndall scattering effects of Ti3C2Tx-TMAOH nanosheets dispersed in NMP; SEM image of the Ti3C2Tx-HF sample; AFM image of Ti3C2Tx-TMAOH nanosheets; XPS Al 2p and F 1s spectra of Ti3AlC2, Ti3C2Tx-HF, and Ti3C2Tx-TMAOH; XPS C 1s spectra of Ti3C2Tx-HF and Ti3C2Tx-TMAOH and their component peak fitting; CV curves of Ti3C2Tx-HF and Ti3C2Tx-TMAOH samples at scan rates from 0.5 to 100 mV/s in 1.0 M Na2SO4, 0.65 M K2SO4, and 1.0 M MgSO4; GCD curves of Ti3C2Tx-HF and Ti3C2Tx-TMAOH samples at current densities from 0.5 to 50 A/g in 1.0 M Na2SO4, 0.65 M K2SO4, and 1.0 M MgSO4; electrochemical performance of the freestanding Ti3C2Tx-TMAOH film electrode including CV curves, specific capacitance vs scan rate, GCD curves, and EIS spectra in 1.0 M Na2SO4, 0.65 M K2SO4, and 1.0 M MgSO4 (PDF)This article has not yet been cited by other publications.

Metal Cation Pre-Intercalated Ti3C2Tx MXene As Ultra-High Areal Capacitance Electrodes for Aqueous Supercapacitors

MXene-transition Metal Sulfide Composite Electrodes for Supercapacitors: Synthesis and Electrochemical Characterization

Achieving Quick Charge/discharge Rate of 3.0 V S−1 by 2D Titanium Carbide (mxene) Via N-doped Carbon Intercalation

New Ti3-yNbyC2Tx MXenes As High-Rate and Ultra-Stable Electrode Materials for Supercapacitors

Interlayer engineering of Ti<sub>3</sub>C<sub>2</sub>T<sub><i>x</i></sub> MXenes towards high capacitance supercapacitors

Flexible Ti3C2Tx@Al Electrodes with Ultrahigh Areal Capacitance: in Situ Regulation of Interlayer Conductivity and Spacing

Ion Intercalation into 2D Titanium Carbide Based MXenes: Applications for Electrochemical Capacitors

Ultrahigh gravimetric and volumetric capacitance in Ti3C2Tx MXene negative electrode enabled by surface modification and in-situ intercalation

Self-Supporting, Binder-Free, and Flexible Ti<sub>3</sub>C<sub>2</sub>TX MXene-Based Supercapacitor Electrode with Improved Electrochemical Performance

Ti3−yNbyC2T MXenes as high-rate and ultra-stable electrode materials for supercapacitors

Achieving High Pseudocapacitance of 2D Titanium Carbide (mxene) by Cation Intercalation and Surface Modification

Amine-Assisted Delaminated 2D Ti 3 C 2 T x MXenes for High Specific Capacitance in Neutral Aqueous Electrolytes

High Gravimetric Capacitance MXene Supercapacitor Electrode Based on Etched Ti3C2Tx by Chemical Etching

Two-dimensional V4C3 MXene As High Performance Electrode Materials for Supercapacitors

A MXene-based EDA-Ti3C2Tx Intercalation Compound with Expanded Interlayer Spacing As High Performance Supercapacitor Electrode Material

Intensifying Electrochemical Activity of Ti3C2Tx MXene via Customized Interlayer Structure and Surface Chemistry

Enhancing ion storage and transport in Ti<sub>3</sub>C<sub>2</sub>T<sub><i>z</i></sub> MXene <i>via</i> a "sacrificial cations" strategy

Multilayer Superlattices of Monolayer Mesoporous Carbon Framework‐Intercalated MXene for Efficient Capacitive Energy Storage

Self-Supporting, Binder-Free, and Flexible Ti 3 C 2 T x MXene-Based Supercapacitor Electrode with Improved Electrochemical Performance

The synthesis and supercapacitor application of flexible free-standing Ti3C2Tx, Mo2TiC2Tx, and V4C3Tx MXene films

High Volumetric Capacitance and Mechanisms of Electrochemical Charge Storage in Two-Dimensional Ti3C2-Based Mxene