Abstract:It is an effective strategy to improve the performance of quasi-two-dimensional (Q-2D) perovskite solar cells (PSCs) by introducing fluoro-substituted aromatic alkylammonium spacer cations into the active layer. Herein, the influence of the benzylammonium (BA) and the x-fluorobenzylammonium (xFBA) cation, in which x stands for the substitution position of the benzene ring (o, ortho; m, meta; p, para), on the crystal orientation, phase distribution, film morphology of the Q-2D (n = 5) perovskite films, and the corresponding device performance is systematically evaluated. The result suggests that compared with BA and oFBA, mFBA and pFBA have a larger dipole moment, forming a dense perovskite film with gradient structures where the n = 1 2D perovskite mainly exists at the top of the film and the large n-phase perovskite exists at the bottom of the film. Encouragingly, the (pFBA)2MA4Pb5I16 (MA = CH3NH3+)-based perovskite solar cells achieve the highest efficiency of 17.12%, with an open-circuit voltage of 1.175 V, a short-circuit current density of 18.50 mA cm–2, and a fill factor of 78.78%, which is significantly higher than those of BA (14.07%)-, oFBA (12.89%)-, and mFBA (14.67%)-based PSCs. Furthermore, pFBA-based devices also exhibit the best stability compared to the other three devices.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.chemmater.2c00146.1H NMR spectra and molecular dipole moments of BAI, oFBAI, mFBAI, and pFBAI; UPS spectra of BA-, oFBA-, mFBA-, and pFBA-based n = 5 2D perovskite and the corresponding (αhv)2 vs hv curves of 2D perovskites; J–V curves of BA-, oFBA-, mFBA-, and pFBA-based Q-2D PSCs with forward and reverse scans; EDS mapping of different elements (C, N, I, Pb, Cl) of perovskite films with different cations; TA spectra for different n phases as a function of delay time of the four films; formation energy of the 2D perovskite corresponding to cations; series resistance (Rs), charge-transport resistance (Rct), and recombination resistance (Rrec) derived from EIS for different PSCs and VTFL form SCLC for different PSCs; and experimental crystallographic parameters of (oFBA)2PbI4 (PDF)This article has not yet been cited by other publications.

Insight into the Enhanced Charge Transport in Quasi-2D Perovskite Via Fluorination of Ammonium Cations for Photovoltaic Applications.

Fluorinated Quasi 2D Perovskite Solar Cells with Improved Stability and Over 19% Efficiency

High‐Efficiency Quasi‐2D Perovskite Solar Cells Incorporating 2,2′‐biimidazolium Cation

Highly Efficient and Stable FA‐Based Quasi‐2D Ruddlesden‐Popper Perovskite Solar Cells by the Incorporation of β‐Fluorophenylethanamine Cations

Selectively Fluorinated Benzylammonium-Based Spacer Cation Enables Graded Quasi-2D Perovskites for Efficient and Stable Solar Cells

Rational Regulation of Organic Spacer Cations for Quasi‐2D Perovskite Solar Cells

Sulfonium Cations Assisted Intermediate Engineering for Quasi‐2D Perovskite Solar Cells

Enhancing Carrier Transport in 2D/3D Perovskite Heterostructures through Organic Cation Fluorination

Phenylformamidinium-enabled quasi-2D Ruddlesden-Popper perovskite solar cells with improved stability

Nucleation and Crystallization in 2D Ruddlesden-Popper Perovskites using Formamidinium-based Organic Semiconductor Spacers for Efficient Solar Cells

Resonant Molecular Modification for Energy Level Alignment in Perovskite Solar Cells

Fluorinated Aromatic Formamidinium Spacers Boost Efficiency of Layered Ruddlesden–Popper Perovskite Solar Cells

Tailoring the Functionality of Organic Spacer Cations for Efficient and Stable Quasi‐2D Perovskite Solar Cells

Tuning the Interfacial Dipole Moment of Spacer Cations for Charge Extraction in Efficient and Ultrastable Perovskite Solar Cells

Boosting Charge Transport in a 2D/3D Perovskite Heterostructure by Selecting an Ordered 2D Perovskite as the Passivator.

Organic-inorganic Hybrid Quasi-2D Perovskites Incorporated with Fluorinated Additives for Efficient and Stable Four-Terminal Tandem Solar Cells

Organic‐Salt‐Assisted Crystal Growth and Orientation of Quasi‐2D Ruddlesden–Popper Perovskites for Solar Cells with Efficiency over 19%

Molecular Engineering of 2D spacer cation to achieve efficient and stable 2D/3D perovskite solar cells

Modulation of Charge Transport from Two-Dimensional Perovskites to Industrial Charge Transport Layers by the Organic Spacer-Dependent Exciton-Phonon Interactions

Strong Electron Acceptor of a Fluorine-Containing Group Leads to High Performance of Perovskite Solar Cells

Over 25% Efficiency and Stable Bromine-free RbCsFAMA-based Quadruple Cation Perovskite Solar Cells Enabled by an Aromatic Zwitterion