Abstract:Long-term durability is critically important for the commercialization of perovskite solar cells (PSCs). The ionic character of the perovskite and the hydrophilicity of commonly used additives for the hole-transporting layer (HTL), such as lithium bis(trifluoromethanesulfonyl)imide (Li-TFSI) and <i>tert</i>-butylpyridine (<i>t</i>BP), render PSCs prone to moisture attack, compromising their long-term stability. Here we introduce a trifluoromethylation strategy to overcome this drawback and to boost the PSC's solar to electric power conversion efficiency (PCE). We employ 4-(trifluoromethyl)benzylammonium iodide (TFMBAI) as an amphiphilic modifier for interfacial defect mitigation and 4-(trifluoromethyl)pyridine (TFP) as an additive to enhance the HTL's hydrophobicity. Surface treatment of the triple-cation perovskite with TFMBAI largely suppressed the nonradiative charge carrier recombination, boosting the PCE from 20.9% to 23.9% and suppressing hysteresis, while adding TFP to the HTL enhanced the PCS's resistance to moisture while maintaining its high PCE. Taking advantage of the synergistic effects resulting from the combination of both fluoromethylated modifiers, we realize TFMBAI/TFP-based highly efficient PSCs with excellent operational stability and resistance to moisture, retaining over 96% of their initial efficiency after 500 h maximum power point tracking (MPPT) under simulated 1 sun irradiation and 97% of their initial efficiency after 1100 h of exposure under ambient conditions to a relative humidity of 60–70%.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/jacs.0c12802?goto=supporting-info">https://pubs.acs.org/doi/10.1021/jacs.0c12802</a>.Experimental section and supplementary notes, figures, and tables (<a class="ext-link" href="/doi/suppl/10.1021/jacs.0c12802/suppl_file/ja0c12802_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Strong Electron Acceptor of a Fluorine-Containing Group Leads to High Performance of Perovskite Solar Cells

A Facile Interface Engineering Method to Improve the Performance of FTO/ZnO/CsPbI 3− X Br X ( X < 1)/C Solar Cells

Minimizing Interfacial Energy Losses Via Fluorination Strategy Toward High-Performance Air-Fabricated Perovskite Solar Cells

Efficient Perovskite Solar Cells with a Gradient Light Absorption Layer and Low VOC Loss Obtained by Interface Engineering

Synergetic Surface Charge Transfer Doping and Passivation Toward High Efficient and Stable Perovskite Solar Cells

Synergistic Effect of Fluorinated Passivator and Hole Transport Dopant Enables Stable Perovskite Solar Cells with an Efficiency Near 24%

Fluorinated Polyimide Tunneling Layer for Efficient and Stable Perovskite Photovoltaics

Multifunctional Trifluoroborate Additive for Simultaneous Carrier Dynamics Governance and Defects Passivation to Boost Efficiency and Stability of Inverted Perovskite Solar Cells

Fluorinated Pentafulvalene‐Fused Hole‐Transporting Material Enhances the Performance of Perovskite Solar Cells with Efficiency Exceeding 23%

Over 24% Efficient Poly(vinylidene fluoride) (PVDF)‐Coordinated Perovskite Solar Cells with a Photovoltage up to 1.22 V

Reconfiguration of Interfacial and Bulk Energy Band Structure for High‐Performance Organic and Thermal–Stability Enhanced Perovskite Solar Cells

Interfacial Bridging Enables High Performance Perovskite Solar Cells with Fill Factor over 85%

Tailored Multi-Functional Molecular Chain-Based Ferrocene Derivative for Efficient and Stable Perovskite Solar Cells

Interfacial Passivation of the p-Doped Hole-Transporting Layer Using General Insulating Polymers for High-Performance Inverted Perovskite Solar Cells

Fluorination of Carbazole-Based Polymeric Hole-Transporting Material Improves Device Performance of Perovskite Solar Cells with Fill Factor Up to 82%

Synergistic Effect of Fluorination on Both Donor and Acceptor Materials for High Performance Non-Fullerene Polymer Solar Cells with 13.5% Efficiency

Side Chain Modulated Ferrocene Derivative As the Interstitial Conductive Medium for High-Performance and Stable Perovskite Solar Cells

Organic Fluorine-Based Trifluoroethyl Methacrylate As Effective Defect Passivators Enabling High-Efficiency and Stable Perovskite Solar Cells

Multifunctional Enhancement for Highly Stable and Efficient Perovskite Solar Cells

High-Efficiency Perovskite Solar Cells with Improved Interfacial Charge Extraction by Bridging Molecules

High Electron Affinity Enables Fast Hole Extraction for Efficient Flexible Inverted Perovskite Solar Cells