Abstract:Means of measuring various parameters and technical characteristics of radio equipment have always occupied leading positions in science and technology. Without an accurate definition of the relevant values, it is impossible to build modern high-quality radio communication systems, radar, navigation ground and satellite systems. In ultrasound diagnostics, which are used in medicine, the speed of blood flow in vessels is studied by determining the frequency of the reflected signal. At the same time, it is necessary to use high-speed frequency measurement tools in systems with active sensors used in telecommunication networks based on Internet of Things technology. For example, in active radar, using the frequency of the reflected signal, it is possible to calculate not only the coordinates, but also the circular speed of the moving target. Modern research is aimed at improving the metrological and technical indicators of existing measuring devices, in particular at developing new methods for correcting the characteristics of the transformation of the measuring channel, which is their main component. At the same time, most digital frequency meters are built on the method of counting the number of pulses N with an unknown period Tx that arrive at the input of the device during a calibrated time interval. All this leads to an increase in measurement time and requires additional hardware costs for fast processing of measurement results. The coincidence method belongs to vernier methods and is promising for use when measuring the frequency of periodic signals. This paper points out the shortcomings of known methods of measuring the frequency of a periodic signal. On the basis of the well-known method of coincidence, a functional scheme of a 16-bit device for measuring frequency, which is implemented on the basis of a FPGA from Intel (Altera), has been developed. The developed coincidence frequency meter has a dynamic range of 96dB. Representation of time diagrams obtained in the Quartus Prime 18.0 automated design environment and confirming the operability of the developed functional scheme of the 16-bit device for frequency measurement by the coincidence method. An analytical dependence for determining the frequency of a periodic signal during frequency measurement by the coincidence method is presented.

Research on Method of Instantaneous Frequency Measurement Based on CORDIC Algorithm

An Algorithm for Realtime High Resolution Octave Analysis Based on Multirate Signal Processing Theory

Analysis of FFT transform and implementation of circuit design based on FPGA

Implementation of direct digital frequency synthesizer based on three-step rotation coordinate rotation digital computer algorithm

Design of Vibration Signal’s Multi-channel Integer Period Synchronous Acquisition Card

FPGA-based Control Method for Rotor Vibration Signal's Full Cycle and Equal Phase Sampling

Real-time Phase Difference Measurement Method with FPGA Speeding Up

Application of CORDIC Algorithm and FPGA in Digital Pulse Compression System of LFM Signal

Implementation of FPGA design of FFT architecture based on CORDIC algorithm

IMPLEMENTATION OF THE COINCIDENCE FREQUENCY METER ON FPGA

FPGA IMPLEMENTATION OF AN FFT PROCESSOR USING CORDIC ALGORITHM

Development of Digital Signal Processing Simulation Platform Based on DSP and FPGA Cooperative Processing Technology

Design of high precision frequency meter with FPGA

High-precision time measurement electronics using the bandpass sampling method

Instantaneous Microwave Frequency Measurement with a Uniform Resolution and Improved Dynamic Range

CORDIC Algorithm Based Digital Detection Technique Applied in Resonator Fiber Optic Gyroscope

Design and Implementation of High Speed Fixed-Point Fast Fourier Transform Processor

Real-time high-precision FMCW laser range extraction method based on a hardware multiplier array

High frequency signal acquisition and control system based on DSP+FPGA

High-precision Frequency Measurement for Microresonant Sensors Based on Improved Modified Multi-Phase Clock Method.

A 5.5 ps Time-interval RMS Precision Time-to-Digital Convertor Implemented in Intel Arria 10 FPGA