Abstract:A four‐in‐one sensor integrating hydrogen sensing technology using palladium nickel alloy, pressure sensing technology, wide range temperature sensing, and micro water measurement technology was developed. A three‐in‐one integrated sensor based on micro current detection technology was developed to realize online monitoring of bushing physical, chemical, and electrical parameters. In order to monitor the state of bushing online, an intelligent monitoring system for transformer bushing was developed. A four‐in‐one sensor integrating hydrogen sensing technology using palladium nickel alloy, pressure sensing technology, wide range temperature sensing, and micro water measurement technology was developed. A three‐in‐one integrated sensor based on micro current detection technology was developed to realize online monitoring of bushing dielectric loss, capacitance, and partial discharge. The test results show the hydrogen measurement range of sensor is 0 to 10,000 μL/L, and the measurement uncertainty is lower than 10% or 10 μL/L. The pressure measurement range is 0 to 1.0 MPa, and the uncertainty is lower than 0.3%. The temperature measurement range is −40°C to 85°C, and the uncertainty is lower than ± 1°C. The micro water measurement range is 0 to 1000 μL/L, and the measurement uncertainty is lower than ± 5% or 10 μL/L. The dielectric loss and capacitance error increased by one order of magnitude compared to current standards. The resolution of partial discharge is 5 pC. The performance of the device fully satisfies the requirements for online monitoring of transformer bushing. It has been installed in dozens of 330 and 750 kV substations, providing a reliable guarantee for safe operation of transformer bushing.

Design of On-Line Monitoring System for End Shield of Transformer High Voltage Bushing

Study on Multi-parameter On-line Monitoring System for Transformer Bushing

Development of Transformer Bushing End Shield Voltage Sensor for Monitoring Overvoltage

Development of multi‐parameter online monitoring equipment for EHV transformer bushing

Study Of On-Line Monitoring Method Of Partial Discharge For Power Transformers Based On Rfct And Microstrip Antenna

On-line multi-sensor monitoring system for insulation condition of oil-immersed power transformer

Development of on-line monitoring system for insulation of high voltage electrical equipment

Development and application of integrated multi-parameter on-line monitoring system for power transformer

Intelligent Electronic Device of UHV Converter Transformer Bushing Monitoring

Oil Pressure Monitoring for Sealing Failure Detection and Diagnosis of Power Transformer Bushing

Development of On-line Monitoring System of Medium Voltage Switchgear

The Design Of Circuit In On-Line Monitoring System For Traction Transformer Insulation

Design of On-Line Monitoring System for Power Transformer Based on Vibration Analysis Method

On-line Condition Monitoring System of Medium-Voltage Switchgear

Research on Insulation Condition Monitoring System for Power Transformers

Intelligent monitoring of EHV transformer bushing based on multi‐parameter composite sensing technology

The Development of an On-line Monitoring System Adopting Partial D ischarge of XLPE Cables

The high voltage bushing on-line monitoring in substation systems

Study on On-Line Monitoring Technique of Traction Transformer Insulation

Development of an On-line Monitoring System of 1.5 Kv DC Cable

On-line Monitoring System for Leakage Current of Exterior Insulation in Power Substation Based on Technology of Virtual Instrument