Abstract:Multilevel inverters with improved voltage quality are widely used in applications such as motor control and electric vehicles. The four-level active neutral point clamped (4L-ANPC) inverter effectively meets the demands for high power density and low device voltage stress. However, balancing the capacitor voltage and reducing its low-frequency voltage fluctuation are critical challenges that need to be addressed. To address these challenges, this paper proposes a "variable reference + zero-sequence injection" method that requires only three reference voltage signals to determine the injected zero-sequence components. Particularly, the expression of the midpoint current, regarding the modulation index and phase current amplitude, is theoretically derived. This reveals the fundamental connection between the zero-sequence voltage signal and the midpoint current, providing a theoretical foundation for the zero-sequence injection method in four-level inverters. Subsequently, a simulation model and an experimental platform of the 4L-ANPC inverter were developed to compare and analyze the waveforms of the upper and lower capacitor voltages, phase currents, and line voltages under different modulation methods. Additionally, the upper and lower capacitor voltage waveforms were examined for various modulation indices. The results indicate that as the modulation index increases, the low-frequency voltage fluctuation in the upper and lower capacitor voltages also rises. At a modulation index of 0.95, the "variable reference + zero-sequence injection" method effectively suppresses the fluctuation in the upper and lower capacitor voltages to be no more than 1 V. These experimental findings validate the effectiveness of the proposed method.

Modulation and Voltage Balancing Control of Dual Five-Level ANPC Inverter for Ship Electric Propulsion Systems

Modulation and Control of an ANPC/H-Bridge Hybrid Inverter for Ship Electric Propulsion Drives

Modulation and Voltage Balance Control of a Four-Level ANPC H-Bridge Converter for Ship Medium-Voltage Propulsion Systems

A Nine-level ANPC/H-Bridge Inverter for Open-Winding Motor Drive System

Symmetrical Hybrid Multilevel Inverters For Ship Electric Propulsion Drives

A Neutral-Point Voltage Balancing Algorithm for Six-phase H-Bridge Neutral-Point-Clamped Converter

An Optimized Carrier-Based PWM Method and Voltage Balancing Control for Five-Level ANPC Converters

A Novel Modulation Scheme and a DC-Link Voltage Balancing Control Strategy for T-Type H-Bridge Cascaded Multilevel Converters

A Novel Single-Stage Five-Level Common-Ground-Boost-Type Active Neutral-Point-Clamped (5L-CGBT-ANPC) Inverter

Modulation Method for Single-Phase Six-Switch Five-Level ANPC Inverter

Capacitor Voltage Balancing of a Five-Level ANPC Converter Using Phase-Shifted PWM

A Neutral-Point Potential Balancing Control Method with Third Harmonic Injected Pulse Width Modulation for Three-Level Converters

A Fo-Adrc Based Neutral-Point Potential Balancing For Three-Level Inverter

Control Strategy of Neutral-point Potential Balancing in Three-level Inverter

A Novel And Reliable Modulation Strategy For Active Neutral-Point Clamped Five-Level Converter

Multi-objective Optimization PWM Control for a Back-to-back Five-Level ANPC Converter

Multi-voltage-vector-based modulated model predictive controller for three-level NPC inverters with neutral-point voltage balancing

Neutral-Point Voltage Balancing Method for Five-Level NPC Inverters Based on Carrier-Overlapped PWM

Simple Voltage Balancing Control of Four-Level Inverter

A Capacitor Voltage Balancing Strategy for a Five-Level Hybrid-Clamped Inverter

A Simplified Space Vector Pulse Width Modulation Strategy for NPC Six-Phase Three-Level Inverter Considering Neutral-Point Potential Balancing