Abstract:Kinematic model predictive control (MPC) is well known for its simplicity and computational efficiency for path tracking of autonomous vehicles, however, it merely works well at low speed. In addition, earlier studies have demonstrated that tracking accuracy is improved by the feedback of yaw rate, as it improves the system transients. With this in mind, it is expected that the performance of path tracking can be improved by a cascaded controller that utilizes kinematic MPC to determine desired yaw rate rather than steering angle, and uses proportional-integral-derivative (PID) control to follow the reference yaw rate. However, directly combining MPC with PID feedback control of yaw rate results in a controller with poor tracking accuracy. The simulation results show that the cascaded MPC-PID controller has relatively stable but larger error compared to classic kinematic and dynamic MPC. Based on the analysis of vehicle sideslip angle, a novel path tracking control method is proposed, which is designed using a kinematic MPC to handle the disturbances on road curvature, a PID feedback control of yaw rate to reject uncertainties and modeling errors, and a vehicle sideslip angle compensator to correct the kinematic model prediction. The proposed controller performances involving steady-state and transient response, robustness, and computing efficiency were evaluated on Carsim/Matlab joint simulation environment. Furthermore, field experiments were conducted to validate the robustness against sensor disturbances and time lag. The results demonstrate that the developed vehicle sideslip compensator is sufficient to capture steer dynamics, and the developed controller significantly improves the performance of path tracking and follows the desired path very well, ranging from low speed to high speed even at the limits of handling.

Force-Driven Path Tracking Control Strategy Based on Vehicle Side-Slip Angle Observation

Combined Fast Control of Drifting State and Trajectory Tracking for Autonomous Vehicles Based on MPC Controller

Coordinated Torque Vectoring Control and Path-Following of Autonomous Vehicles with Sideslip Angle Estimation

Path Tracking of Autonomous Vehicle with Consideration of Vehicle Stability in Sideslip Angle Phase Plane

A Novel Simultaneous Planning and Control Scheme of Automated Lane Change on Slippery Roads.

Intelligent Vehicle Path Tracking Control Strategy Considering Data-Driven Dynamic Stable Region Constraints

Switched model predictive controller for path tracking of autonomous vehicle considering rollover stability

Research on Yaw Stability Control Strategy Based on Direct Slip Rate Allocation

Coordinated Path-Following and Direct Yaw-Moment Control of Autonomous Electric Vehicles with Sideslip Angle Estimation

Coordinated longitudinal and lateral vehicle stability control based on the combined-slip tire model in the MPC framework

An Improved Kinematic Model Predictive Control for High-Speed Path Tracking of Autonomous Vehicles

Design of a Path-Tracking Steering Controller for Autonomous Vehicles

Slip-aware Driver Assistance Path Tracking and Stability Control

Path Tracking Control of Autonomous Vehicle Based on Nonlinear Tire Model

Trajectory tracking multi-constraint model predictive control of unmanned vehicles based on sideslip stiffness estimation with XGBoost algorithm

A Model Predictive Controller with Switched Tracking Error for Autonomous Vehicle Path Tracking

Integrated Strategy for Vehicle Dynamics Stability Considering the Uncertainties of Side‐slip Angle

Adaptive Coordinated Path Tracking Control Strategy for Autonomous Vehicles with Direct Yaw Moment Control

Simultaneous Estimation of Tire Side-Slip Angle and Lateral Tire Force for Vehicle Lateral Stability Control

Integrated Path Tracking with DYC and MPC using LSTM Based Tire Force Estimator for Four-wheel Independent Steering and Driving Vehicle

A Vehicle Lateral Stability Control Strategy Considering Nonlinear Disturbance and Tire Slipping