Path Tracking Control Based on T-S Fuzzy Model for Autonomous Vehicles with Yaw Angle and Heading Angle

Yelin He,Jian Wu,Fuxing Xu,Xin Liu,Shuai Wang,Guanjie Cui
DOI: https://doi.org/10.3390/machines12060375
IF: 2.899
2024-05-29
Machines
Abstract:Existing vehicle-road models used for road tracking do not take into account the side slip angle, which leads to a reduction in road tracking accuracy in scenarios where the vehicle is at a large side slip angle, such as an emergency lane change. Consequently, this study presents a path-tracking control technique based on the T-S fuzzy model of heading angle vehicle autonomy. In this paper, based on the yaw angle-based vehicle tracking model, a heading angle-based tracking model considering the side slip angle is constructed. Second, since the vehicle speed varies with time, this paper selects the membership function of the vehicle speed to establish the T-S fuzzy model of autonomous vehicle based on the yaw angle and heading angle, respectively, and ensures the robustness and stability over the whole parameter space by the linear parameter variation robust H∞ controller. Then, cost functions based on the yaw angle and heading angle augmented error systems are created separately to optimize the system's overall performance. Ultimately, simulation and experimentation confirm that the algorithm for control, which is based on the fuzzy model of the heading angle vehicle, has superior autonomous trajectory performance.
engineering, mechanical, electrical & electronic
What problem does this paper attempt to address?
The problem that this paper attempts to solve is: the existing vehicle path - tracking control models have insufficient path - tracking accuracy when dealing with large side - slip angles. Specifically, when the vehicle performs operations such as emergency lane - changing, since the traditional models do not consider the influence of side - slip angles, the accuracy of path - tracking decreases. To solve this problem, this research proposes a path - tracking control method based on the T - S fuzzy model, which combines the yaw angle and the heading angle to improve the path - tracking accuracy and stability of self - driving vehicles under various driving conditions. ### Key improvement points: 1. **Introduction of side - slip angle**: Traditional vehicle - road models usually only consider the yaw angle and ignore the influence of the side - slip angle. In this paper, by introducing the side - slip angle, a path - tracking model based on the heading angle is constructed, thus improving the accuracy of the model. 2. **Application of T - S fuzzy model**: In order to deal with the situation where the vehicle speed changes over time, this paper selects the vehicle speed as the membership function, establishes a T - S fuzzy model based on the yaw angle and the heading angle, and ensures the robustness and stability of the system through the linear parameter - varying robust H∞ controller. 3. **Optimization of performance indicators**: By defining the cost function of the augmented error system based on the yaw angle and the heading angle, the overall performance of the system is optimized, further improving the path - tracking accuracy. ### Specific implementation steps: 1. **Establishment of vehicle dynamics and kinematics models**: Vehicle dynamics and kinematics models are established respectively based on the yaw angle and the heading angle, and the influence of the side - slip angle is considered. 2. **Design of T - S fuzzy controller**: According to the change of vehicle speed, a T - S fuzzy controller is designed, and the optimal feedback gain is solved through linear matrix inequality (LMI) to ensure the stability and robustness of the system at different speeds. 3. **Definition of cost function**: In order to optimize the system performance, the cost function of the augmented error system based on the yaw angle and the heading angle is defined, and the eigenvalues of the system are restricted within a fixed circular domain to enhance the dynamic performance. 4. **Simulation verification**: Through the co - simulation of MATLAB/Simulink and CarSim, the effectiveness of the proposed control algorithm is verified and compared with the existing methods. ### Summary: The main contribution of this paper is to solve the problem of insufficient accuracy of traditional path - tracking models in the case of large side - slip angles by introducing the side - slip angle and combining the T - S fuzzy model, which significantly improves the path - tracking accuracy and stability of self - driving vehicles.