Abstract:This study investigates a sixth-order narrowband superconducting balanced filter with high frequency selectivity and wide stopband based on asymmetrically coupled stepped-impedance resonators (SIRs). Three types of coupled SIR pairs with different characteristics are investigated. The differential-mode (DM) phase shifts, coupling coefficients, and common-mode (CM) levels of the three SIR pairs are then analyzed. The spurious frequencies of DM responses can be pushed far away from the fundamental frequency to widen the stopband by properly choosing the impedance ratio of the SIR and using dissimilar SIRs with dispersed harmonics. Moreover, an inherent CM suppression can also be obtained because of the different resonant frequencies in DM and CM equivalent circuits. Results also show that the electromagnetic coupling pair can contribute a weak coupling coefficient for narrowband design without increasing the circuit size. The structure of the electric coupling pair is beneficial for high-order circuit interconnection. The magnetic coupling pair possesses the highest CM rejection. Moreover, the weak coupling properties are well-utilized for narrowband design. For validation, a sixth-order balanced bandpass filter is designed using the three coupled SIR pairs, and a cross-coupling structure is further introduced to produce transmission zeros (TZs) and enhance the passband selectivity. The magnitude and phase delay of the DM transmission paths are analytically illustrated to explain the TZ production. Eventually, the proposed balanced filter is implemented by a high-temperature superconducting technique to reduce the insertion losses and is measured at the temperature of 77 K. The measured results show that the fractional bandwidth of the passband is 1.6$%$ with less than 0.37 dB in-band insertion loss. The $-60$ dB bandwidth/$-3$ dB bandwidth rectangle ratio is less than 1.45 while the in-band CM suppression is better than 40 dB. The $-$20 dBłinebreak stopband is up to about 5$f_{0}^{d}$ ($f_{0}^{d}$ is the DM fundamental frequency).

Design of a High-Order Narrowband Superconducting Balanced Filter Based on Asymmetrically Coupled Stepped-Impedance Resonators

High-Order Balanced Superconducting Filter With High Selectivity, Low Insertion Loss, and Wide Stopband Range For Radio Astronomy

A Sixth-order Switchable Superconducting Balanced Filter with Wide Stopband Using Asymmetric Coupled SIRs

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Compact Wide-Stopband Dual-Band Balanced Filter Using an Electromagnetically Coupled SIR Pair with Controllable Transmission Zeros and Bandwidths.

Balanced Dual-Band Superconducting Filter Using Stepped-Impedance Resonators with High Band-to-Band Isolation and Wide Stopband

Design of Balanced Dual-Band Superconducting Bandpass Filter with High Selectivity and Deep Common-Mode Suppression

High-Selectivity Balanced Bandpass Filter with Mixed Electric and Magnetic Coupling

High-order Dual-Band Superconducting Filter with Independently Controllable Passbands and Wide Stopband

Broadband Balanced Filter with High Common-Mode Suppression and Wide Stopband Based on SIW and SSPP

High-Temperature Superconducting Bandpass Filter Using Asymmetric Stepped-Impedance Resonators with Wide-Stopband Performance

Design of a Low-Band Wideband Superconducting Filter Using Triple-Mode Resonator

Balanced dual-band superconducting filter using square ring loaded resonators with ultra-low insertion loss and common-mode noise suppression

A Wide Stopband Wideband HTS Filter Using Stepped-Impedance Resonators With an Interdigital Capacitor Structure

Wideband and wide stopband superconducting bandpass filter using asymmetric stepped‐impedance resonators connected to open stub

High-Order Dual-Band Superconducting Bandpass Filter with Controllable Bandwidths and Multitransmission Zeros

A VHF-Band Dual-Narrowband HTS Filter Using Superconducting Dual-Composite Right-/Left- Handed Resonators: Design and Implementation

Highly Selective and Controllable Superconducting Dual-Band Differential Filter with Attractive Common-Mode Rejection

High-Order Balanced Dual-Band HTS BPF with Flexible Frequency Ratio and Sharp Rejection Skirts

High Selectivity Quadruple‐mode Broadband Bandpass Filter with Source‐load Coupling

A Dual‐band Superconducting Filter with a Large Bandwidth Ratio