Abstract:The angular position measurement of an array antenna based on a wireless signal has high accuracy in an indoor no-occlusion environment. However, due to the high complexity of indoor environments, signal occlusion, multipath, and other interfering factors are inevitable when users move randomly, which can greatly reduce the positioning accuracy. In addition, different directions of the positioning source signal can also affect the positioning result. The switching wheels of the dual-polarization antenna array are collected in channel 1, the fast Fourier transform (FFT) is applied to the data of channel 2 to estimate the frequency offset, and the phase of the data is compensated. Using the FFT frequency offset estimation, the high-precision positioning of a single base station is realized using the dual-channel switch and dual-polarization antenna array in turn. Aiming at analyzing the affecting factors of the positioning system accuracy, the strong tracking kalman filter algorithm is studied. At the same time, the singular value decomposition of the covariance matrix is performed to improve the robustness of the strong tracking kalman filter, and the adaptive factor is introduced to improve the filtering accuracy. The proposed positioning algorithm can achieve the positioning accuracy within 1 m in the coverage area in a line-of-sight (LOS) environment, while the dynamic positioning accuracy within 1 m cannot be guaranteed in the coverage area in a non-line-of-sight (NLOS) environment. On this basis, the analysis of the static, rotational, and dynamic positioning accuracies of the source in the LOS and NLOS environments shows that the proposed singular value decomposition strong tracking kalman filter (SVD-STKF) algorithm can improve the overall positioning accuracy of the system by 0.03 m, and the maximum error in the LOS environment can be reduced by 0.08 m. The proposed SVD-STKF algorithm can correct the Hausdorff distance of dynamic positioning by up to 0.513 m in the NLOS environment where the system’s positioning accuracy decreases sharply due to the signal shielding. Also, it can make the positioning results smoother and achieve a good correction effect for the points far away from the true trajectory.

Indoor Carrier Phase Positioning Algorithm Based on Time-Varying Clock Error Elimination

Indoor Carrier Phase Positioning Technology Based on OFDM System

Indoor Localization With Distributed 5G Small Cells Considering Time Alignment Errors

Indoor TDOA Mobile Positioning with Clock Drift and Its Cram??er-Rao Bound

An Accurate Positioning Method Based on Time-Division Strategy for Indoor Moving Target

Fusion Location Method Based on 5G Carrier Phase

A New Carrier Phase Positioning Method Based on Dual-Antenna Transmitters

Three-dimensional Positioning of Wireless Communication Base Station

Phase Calibration Based Three-Dimensional Beamspace Matrix Pencil Algorithm for Indoor Passive Positioning and Tracking

Determination of an Indoor Target Position: An Accurate and Adaptable Approach Based on Differential Positioning

Design and Implementation of a Wireless Time Synchronization Based Positioning System

An Indoor DFEC Ranging Method for Homologous Base Station Based on GPS L1 and BeiDou B1 Signals

Optimization of Time Synchronization and Algorithms with TDOA Based Indoor Positioning Technique for Internet of Things

Fusion of 5G Carrier Phase Ranging and 5G CSI Fingerprinting for Indoor Positioning

Centimeter-Level Carrier Phase Positioning with Asynchronous Ground-Based Positioning Systems

An Indoor Positioning and Tracking Algorithm Based on Angle-of-Arrival Using a Dual-Channel Array Antenna

An Indoor Continuous Positioning Algorithm on the Move by Fusing Sensors and Wi-Fi on Smartphones

High accuracy and fast acquisition algorithm for pseudolites-based indoor positioning systems

Single-Site 3-D Positioning in Multipath Environments Using DOA-Delay Measurements

UWB Indoor Positioning Algorithm Based on TDOA Technology